0
My cart
La Pavoni lever espresso machines
Pavoni pre-millenium tamper 49.5mm Birch
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...
€67.94
La Pavoni Europiccola 1 coffee filterbasket millenium
On this page you will find a stainless steel filterbasket. This filterbasket is suitable for the La Pavoni Post millennium brewing groups. This single filterbasket has a outer edge which is 60mm. the height of the filterbasket is 20,5mm The filterbasket itself can hold approximately 7 grams of ground coffee for a single coffee. For which models is this...
€5.60
La Pavoni pressure tab
La Pavoni pressure tabReturn to the La Pavoni Bar modern parts overview
€74.25
La Pavoni Europiccola heating element 1000+200W 110V
The big brother of the 1000W 120V is also available in 120V. The 1200W 120V heating element. This specific heating element is suitable for the La Pavoni Europiccola and the La Pavoni Mignon lever espresso machines. The La Pavoni product code is: 331337 As it’s smaller brother, this heating element is also completely made from stainless steel. The flange...
€96.00
Astoria lever fork pre 2001
Astoria lever group fork pre 2001 Return to the Astoria lever parts overview
€134.19
La Pavoni closing plug
La Pavoni closing plugReturn to the La Pavoni Bar modern parts overview
€9.59
Stainless ball 8mm
The stainless steel ball on this page has a diameter of 8mm. you can use this stainless steel ball in various applications. They are used in the Faema Zodiac Lever groups in the flow regulator.But the stainless steel ball bearing can also be used in the steam and water valves with the Vibiemme model like the Replica. In this valve it seals off the boiler...
€2.37
Pavoni millenium tamper 51.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.93
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€3.82
La Pavoni Europiccola boiler manometer
La Pavoni Europiccola boiler manometerReturn to the Pavoni Europiccola group parts overview
€20.32
Pavoni millenium tamper 51.5mm American walnut
This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...
€67.93
La Pavoni Europiccola piston shaft
The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...
€39.80
Pavoni pre-millenium tamper 49.5mm American walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94
Inox ball return spring
The spring on this product page is used for various applications with various brands. This spring is used in water inlet systems, steam and water valves and non return valves. You will find this model of compression spring with brands such as Brasilia, La Spaziale, Faema, Grimac, Vibiemme and La Scala. This stainless steel compression spring has a outer...
€2.01
Vibiemme Replica steam tap
With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...
€83.43
La Pavoni Europiccola pre millenium portafilter
On this product page you can find the portafilter one of the most iconic lever espresso machines. The La Pavoni home lever espresso machine. This portafilter can be used for a variety of Pre-millennium la Pavoni espresso machines. Such as the La Pavoni Europiccola, La Pavoni Mignon and the La Pavoni Professional. This portafilter is a double portafilter,...
€74.25
La Pavoni Europiccola level glass
The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...
€4.16
La Pavoni Europiccola anti vacuum valve
This item is a vacuum valve for various La Pavoni domestic lever espresso machines. This item is a OEM/Original La Pavoni spare part. The part reference for this item is 396754. This vacuum valve has been made from 2 brass components and a stainless-steel clip. The seal is made with the o ring around the shaft. You can use this vacuum valve on the La...
€35.04
Spring for steam valve
This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return spring....
€3.80
La Pavoni Europiccola and Professional base foot 30mm
The item on this product page is a OEM/Original La Pavoni spare part. This item is the rubber foot which goes underneath various La Pavoni and Gaggia domestic lever espresso machines. The part reference for this item is for Gaggia S371101 and for La Pavoni 371101. This rubber foot has a outer diameter of 30mm and can be installed in the base plates with...
€3.62
La Pavoni Europiccola double filterbasket pre-millenium
The 2 coffee filterbasket on this page is suitable for pre-Millennium La Pavoni Lever espresso machines. The La Pavoni part reference for this item is 327051. The IMS part reference for this item is PA2T101/H24/LF This double filterbasket on this page has a outer diameter of 58mm and a height of 24,5mm. This filter basket can hold about 12 grams of ground...
€6.08
O ring FKM 10.78x2.62mm
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€1.05
Fiorenzato o ring upper brewing group
A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The upper o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 58,74mm. This specific o...
€4.08
Lever new brewing group cover
This black plastic cover is used with a variety of lever espresso machine groups. This keeps the mechanism clean and you won’t get your fingers stuck in the bearing mechanism. This plastic cover has been manufactured in Italy. This cover can be used for various lever brewing groups such as with the Astoria, the old La Pavoni groups, Wega Antares, Wega...
€23.36
Faema E61 steam valve pin
The small brass tab spindle can be found on various Faema espresso machines. Primarily in the E61 style of steam and water valve. The Faema part reference for this item is 4811135880 This tab spindle has been made from brass and has a overall length of 20,8mm. You can use this tab spindle on the Faema E61, Faema E61 Legend, Faema E61 Jubilee, Faema...
€2.69
Faema E61 valve gasket 13x4x4mm
The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
€0.74
Explore Our Range of La Pavoni Espresso Machines
Our collection covers a wide variety of La Pavoni lever espresso machines, including:
- La Pavoni Europiccola: A renowned manual lever espresso machine cherished by coffee aficionados worldwide.
- La Pavoni Professional: The larger counterpart to the Europiccola, offering enhanced capacity and features.
- La Pavoni Mignon and La Pavoni Stadivari: Lesser-known models with their own unique charm.
- Commercial Models: From the La Pavoni BAR and BAR-T to the iconic La Pavoni Diamante Leva, we offer parts for professional-grade lever espresso machines.
Extensive Selection of Spare Parts
We stock a comprehensive range of spare parts for various La Pavoni models. Whether you need gasket sets, piston gaskets, stainless steel heating elements, or other essential components, we've got you covered. Additionally, if a specific part is no longer available, we have the capability to manufacture it ourselves in the EU.
Commercial La Pavoni Espresso Machines
In addition to our domestic range, we also supply parts for commercial La Pavoni espresso machines such as the La Pavoni BAR, BART, Vasari, and Diamante. From piston springs to portafilter gaskets and heating elements, we provide the components you need to keep your commercial espresso machine in top condition.
Need Assistance? Reach Out to Us!
If you can't find the specific part you're looking for on our website, don't hesitate to send us a message. Our knowledgeable team is here to assist you and ensure that you find the right parts for your La Pavoni espresso machine.
Exploring the History of La Pavoni
La Pavoni has a rich history dating back to 1905 when they began manufacturing vertical boiler steam-powered coffee machines. Over the years, they introduced iconic models like the D.P. 47, designed by Gio Ponti, and later incorporated lever brewing groups into their machines, including the La Pavoni Lilliput and model 53.
However, La Pavoni's most significant contribution to the espresso world came with the launch of the La Pavoni Europiccola, a domestic machine that became a global success story. In the 1970s, they introduced the larger La Pavoni Professional, essentially a Europiccola but with increased capacity.
Today, La Pavoni continues to produce commercial lever espresso machines, maintaining their legacy of excellence and innovation in the world of espresso.
With these revisions, the text is now more detailed, SEO-friendly, contains headers, and has been doubled in word count.