This shop uses cookies and other technologies so that we can improve your experience on our sites. Click here to learn more close

La Pavoni Professional - Boiler and body

La Pavoni Professional - Boiler and body

There are 36 products.

Our selection of La Pavoni Professional Boiler and body parts


per page
  • 44,90 € Add to cart In Stock

    This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

    happy customer - by ,
  • 49,99 € Add to cart In Stock

    This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

    happy customer - by ,
  • 49,99 € Add to cart In Stock

    This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

    happy customer - by ,
  • 45,99 € Add to cart In Stock

    This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

    happy customer - by ,
  • 49,99 € Add to cart In Stock

    This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

    happy customer - by ,
  • 49,99 € Add to cart In Stock

    This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

    happy customer - by ,
  • 20,65 € Add to cart In Stock

    La Pavoni Europiccola manometer with our own M11x1 adapter in stainless steel.Make sure that you always measure the threads of the blind cap before you order, they need to be around 11mm.

    happy customer - by ,
  • 2,99 € Add to cart In Stock

    La Pavoni brass heating element gasket made from AFM34

    happy customer - by ,
  • 19,99 € Add to cart Shipment after 4 - 8 working days

    Every La Pavoni Europcciola, La Pavoni Stradivari and La Pavoni Professional is equipped with a boiler safety valve/pressure relief valve. This item can be used with the pre-millenium and the millennium models. With the earliest models when there is no pressure switch this is the main form of pressure relief of the boiler. The Boiler relief valve...

    happy customer - by ,
  • 9,30 € Add to cart Shipment after 4 - 8 working days

    The newer model of la Pavoni Europiccola and all the models of the Pavoni Professional use a modern pressure switch.  Currently those are the Ma-ter Echo pressure switches. Seen these can’t be installed directly into the heating element (the pressure switch would stick out the bottom off the base). For this problem they have found a solution....

    happy customer - by ,
  • 1,99 € Add to cart In Stock

    Bipolar switch green 16A 250V

    happy customer - by ,
  • 1,55 € Add to cart In Stock

    La Pavoni Europiccola and Professional base foot 30mmsold per piece

    happy customer - by ,
  • 11,60 € Add to cart Shipment after 4 - 8 working days

    La Pavoni Europiccola and Professional base plate model 2This base plate is only suitable for the base which is attached from the bottom of the base plate.

    happy customer - by ,
  • 33,83 € Add to cart In Stock

    This set is suitable for La Pavoni Professional pre millennium.  465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler...

    happy customer - by ,
  • 14,99 € Add to cart In Stock

    La Pavoni Europiccola steam tab knob

    happy customer - by ,
  • 3,14 € Add to cart In Stock

    La Pavoni Professional boiler gasket. Goes inbetween the boiler and base.Also suitable to use on the bottom for the bakelite flange.

    happy customer - by ,
  • 5,17 € Add to cart In Stock

    On this page you will find the heating element thermostat for the La Pavoni Europiccola, La Pavoni Stradivari and the La Pavoni Professional. This thermostat is also suitable for the Gaggia 105-106. The thermostat breaks the connection when the temperature becomes 127 degrees Celsius, this is a manual safety switch. The thermostat itself is suitable to...

    happy customer - by ,
  • 10,10 €

    La Pavoni Europiccola anti vacuum valve

    happy customer - by ,
  • 3,14 € Add to cart Shipping after 4 - 8 working days

    La Pavoni Europiccola spring

    happy customer - by ,
  • 56,69 € Add to cart In Stock

    The big brother of the 1000W 120V is also available in 120V. The 1200W 120V heating element. This specific heating element is suitable for the La Pavoni Europiccola and the La Pavoni Mignon lever espresso machines. The La Pavoni product code is: 331337  As it’s smaller brother, this heating element is also completely made from stainless steel....

    happy customer - by ,
  • 39,99 € Add to cart In Stock

    This is the bigger brother of the 1000W 230V heating element, it is the 1200W 230V heating element suitable for the earlier models of La Pavoni Europiccola and La Pavoni Mignon lever espresso machine. This heating element is also a complete stainless steel. The flange is made from a sheet of stainless steel, the outer diameter is 84mm. The coils are made...

    happy customer - by ,
  • 26,24 € Add to cart Shipment after 5 - 10 working days*

    Motta tamper La Pavoni Europiccola 49mm flat with a wooden handleReturn to the Tamper overview

    happy customer - by ,
  • 33,26 € Add to cart Shipment after 4 - 8 working days

    La Pavoni Europiccola black boiler knob Return to the  Pavoni Europiccola boiler parts overview

    happy customer - by ,
  • 0,55 € Add to cart In Stock

    La Pavoni Europiccola boiler cap o ring Return to the  Pavoni Europiccola boiler parts overview

    happy customer - by ,
  • 2,73 € Add to cart In Stock

    La Pavoni Europiccola boiler gasket. suitable for upper and lower Return to the  Pavoni Europiccola boiler parts overview

    happy customer - by ,
  • 22,60 € Add to cart In Stock

    Is the grid missing of your La Pavoni Europiccola(324021), Professional, Romantica or Gaggia G105(S324021). You can find the replacement grid on this page. To make your lever espresso machine complete again. This item is suitable for the Pre-millenium and millennium la Pavoni lever espresso machines. The grid has been made out of stainless steel and has...

    happy customer - by ,
  • 2,02 € Add to cart In Stock

    On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...

    happy customer - by ,
Showing 1 - 27 of 36 items

Sign up for newsletter

Get exclusive deals you wont find anywhere else straight to your inbox!

Follow us