Boiler

Gaggia boiler gasket

Safety valve M19 1,8 bar

It does happen that the boiler of your Faema e61 espresso machine has got a leak. This can have happened due to freezing in storage, corrosion, or a completely different reason. The boiler on this page doesn’t look at any boiler used in the Faema E61 espresso machine 2 group. The most famous one is the double flanged boiler, but you also have the single...

Anti vacuum valve TV 1/4". Suitable for:CodeProducerA10220 Astra000634 Aurora-brugnetti7452502 Bezzera05062.4.00.09 Brasilia01.00504 Carimali418-911-002 Cimbali418-911-010 Cimbali418911010 Cimbali408898 ContiC219900560 Ecm00200034 Elektra65000205 Expobar2161-118968 Faema2161118968 Faema418911002 Faema...

This item is a vacuum valve for various La Pavoni domestic lever espresso machines. This item is a OEM/Original La Pavoni spare part. The part reference for this item is 396754. This vacuum valve has been made from 2 brass components and a stainless-steel clip. The seal is made with the o ring around the shaft. You can use this vacuum valve on the La...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a boiler safety valve for various domestic lever espresso machines. The La Pavoni part reference for this item is 396751 This safety valve is only the body and not the internals of this valve.  This boiler valve has at the bottom a male M12 thread. You can use this on the...

On this page you will find a safety valve which has a male 3/8”BSP-G thread. The pre-set pressure of this valve is 1,8bar. You can adjust it yourself but not recommended. The spring inside the safety valve is made from stainless steel and the sealing material is FKM. The valve has been made in Italy. We do strongly advise to replace the safety valve every...

Faema Mercurio boiler gasket 8 hole made from FDA graded fiber materialReturn to the Faema Mercurio parts overview

La Pavoni safety valve M22 code 395221G

For the La Pavoni Europiccola there haven been a variety of boiler fixing rings. It started in the 60ies with the steel boiler rings, from the 1980’s you will find the brass boiler rings. These have 3 m6 bolt holes for installing the heating element, there is also a attachment point for the ground wire. Around the turn of the century La Pavoni introduced...

On this product page you will find a boiler gasket suitable for various Faema Urania boilers. This item is suitable for the first series of Faema Urania espresso machines. Not for the later ones which have similar boiler styles as the E61 and president. This PTFE boiler gasket has a outer diameter of 195mm a inner diameter of 155mm. The gasket has 9 holes.

Faema Thermovelox boiler group locking gasket AFM34

San Marco boiler gasket PTFE 165X151X3mm

The item on this page is a Bezzera boiler gasket.  This gasket is used to seal off the boiler flange and the espresso machine boiler.  The Bezzera part reference numbers for this item are 5492005 and 5492006. This boiler gasket is made from a universal carbo material. The outer diameter is 205mm the inner diameter is 150mm and the thickness is 2mm. There...

This product page is for a boiler gasket that is compatible with several vintage La Cimbali espresso machines. This boiler gasket is compatible with the La Cimbali M15 lever espresso machine, La Cimbali Rubino, and La Cimbali Gran Luce.Victor Reinz used AFM 34, a food-graded fiber gasket material, to make this one. 3 mm is the thickness, 200 mm is the...

On this product page you will find a round copper gasket, this copper gasket is of the kind which compresses when you tighten the nut above it. You will see this type of compressible copper gasket in combination on anti vacuum valves. The copper gasket on this page has a outer diameter of 18,7mm a inner diameter of 13mm and a thickness of 2,5mm. The...

Safety valve 1/2"1,8 Certif CE PED IV

The boiler gasket on this page is used to seal off the boiler flange with the rest of the boiler. This model of gasket is used with Astoria and Wega espresso machines. The Astoria part number is 12003 and the Wega part number is WY12003. This boiler gasket is made from the material PTFE. The outer diameter is 191mm, the inner diameter is 139mm and the...

On this product page you will find a boiler gasket for some of the Faema E61, Faema President and Faema Lambro espresso machines. This gasket goes in combination with the boilers which have a separate heating element flange and a water level flange or a single boiler with a heating element flange. We have this gasket made from AFM34 in Germany. This...

Anti vacuum valve 1/4".

Faema E61 boiler 1 group 9LWhen this boiler needs to replace a stainless steel boiler. Some of the pipe work needs to be replaced or remade. It is possible that there are minor dents due to shipping. this is quite common and won't affect the functioning of the boiler.

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...

Faema E61 flange sight glass side. Do you have a small leak in one of your boiler flanges. this can be fixed easily by replacing the flange which is leaking. Next to the level side flange we also offer the heating element side flange. Return to the Faema E61 boiler parts overview

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

Anti vacuum valve 1/4" with hose connection 8mm

La Cimbali Liberty microcimbali boiler gasket o ring

Faema Mercurio stainless boiler flange

With machines which are around 60 years old it is not uncommon that you get corrosion in some parts. With the Flanges used on the Faema E61, Faema President and the Faema Lambro it is quite common to find pin holes. These holes leak air or water in some cases. This flange has been made for the heating element side of the Faema E61/President and Lambro...

Faema Urania 9 hole aluminium boiler flange ring. This flange ring is not suited for the E61 style boiler flange ring.Return to the Urania boiler parts overview

Rancilio anti vacuum valve 3/8"

La Pavoni Professional boiler gasket. Goes inbetween the boiler and base.Also suitable to use on the bottom for the bakelite flange.