Heating elements

Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180

Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...

It is quite common that the heating element on the 1 group Gaggia America is broken. Finding the correct heating element for this espresso machine is quite difficult. Seen the espresso machine does have quite a shallow boiler, so a lot of elements won´t fit. This specific model does fit and produces 1200W at 230V. you can also upgrade your single group...

Wega heating element 2 gr 2600W 230VType flangedwatt 2600wvolt 230/400V

On this product page you will find a reproduction of the original Vam/Arrarex Caravel heating element. This heating element is suitable for a variety of Caravel models, which use the push in elements. But not on models which use the wires to connect them to the power. This heating element has made out of stainless steel and produces approx. 550W at...

Heating element gasket PTFE 52,2x41,2x1mm

The heating element on this page is quite a big model, which goes over 500mm. This specific heating element is made for Astoria and Wega espresso machine models with 3 brewing groups. This heating element is listed with Astoria under 17101 and with Wega the part number is WY17101  This heating element produces 3700W at 230/240V. The heating element has 4...

The heating element on this product page is suitable for the Elektra Microcasa a Leva domestic lever espresso machine. This element produces 800W at 110V and there are 2 connecting poles. The immersed length of this element is 45mm. The diameter of the element is 50mm and the threaded connections are ¼”BSP-G. To seal off this heating element you need 2...

Arrarex Caravel heating element 1.0 - 1.3 version

Nuova Simonelli heating element gasket 67x55x3mm

 Vibiemme heating element 1800W 230V 1"1/4 Type Thread 1 1/4"watt 1800volt 230length (mm) 140

Gasket for La Cimbali heating element with four holes (97x55x3mm). The gasket seals the gap between the heating element flange and the boiler flange. The gasket fits the La Cimbali Rubino, La Cimbali Gran Luce, and a variety of other La Cimbali M15 machines.Always clean the whole mating area for the gasket when changing a fiber gasket. This decreases the...

Gaggia heating element gasket EN50X40X3MM

Astoria heating element 2 group 4000W 230VType flangedwatt 4000volt 230

The heating element on this page is suitable to use on the La San Marco 85 Leva lever espresso machine. The San Marco part reference for this heating element is 108461. This element produces 3000W at 230V. There are in total 4 connecting poles. The immersed length of this element is 375mm. The flange is 82x82mm. This element is mainly for 2 group espresso...

Vibiemme heating element 1600W 250V Type Thread 1 1/4"watt 1600volt 250length (mm) 95

Vibiemme heating element 1200V 230V Type Thread 1"watt 1200volt 230length (mm) 100

Gaggia XD heating element 2 gr 4000/4760W 230VType flangedwatt 4000/4760volt 220/240length (mm) 310

The big brother of the 1000W 120V is also available in 120V. The 1200W 120V heating element. This specific heating element is suitable for the La Pavoni Europiccola and the La Pavoni Mignon lever espresso machines. The La Pavoni product code is: 331337  As it’s smaller brother, this heating element is also completely made from stainless steel. The flange...

Nuova Simonelli heating element 3/4 group 5000W 230/380V L 570mm

It is always possible that your old heating element for your La Pavoni Europiccola, La Pavoni Romantica, La Pavoni Stradivari or your Gaggia 105 burns or gets a short. The other option is that you purchased a old model La Pavoni Europiccola and you want to convert your classic lever espresso machine to a proper 120V version. This model of heating element...

Gaggia XD heating element 3 gr 5000/5950W 230V Type flangedwatt 5000/5950volt 220/240length (mm) 400

Faema heating element 2 group 3780/4500W 230/380V

La San Marco heating element 3 gr 3500W 230/380V L 380mm

Faema E61 legend 1 group heating element original220-240V 3000-3570W

Faema Mercurio stainless steel heating element set. special order item 2 - 3 weeks

La San Marco PTFE heating element gasket 56x46.5x3mm

Astoria heating element 4500W 230/380V L 310mmType                       flangedwatt 4500volt                      230/400length (mm) 310

Rancilio heating element 3 group 6000W 230/380VType flangedwatt 6000volt 230/380length (mm) 380

The element shown on this product page can be ideal to make from your 220/230V Faema E61 a 110V model. This heating element has the typical Faema type of brass flange. The element is powered at 110V and supplies 2600W. The immersed length of the element is just 350mm. The heating element gasket used for this element has a outer diameter of 57mm a inner...

It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element. The...

Nuova Simonelli heating element 2 gr 3000W 230/380V Type flangedwatt 3000volt 230/380vlength (mm) 340

Faema heating element 2/3 group 4500W 230/380V.Type flangedwatt 4500volt 230/380length (mm) 380Suitable for:CodeProducer17101 Astoria CMA3541135078 Faema911545000 Faema911545010 Faema17104 Wega

Have you ever wanted to convert your single group Faema lever espresso machine from a 220-230V version to a 110V version, now you can. The heating element on this product page is suitable for installation on various antique Faema Lever groups and regular Faema E61 groups. This heating element has the typical Faema type of brass flange. The element is...

On this page you will find a heating element suitable for various Brasilia espresso machine models. This specific heating element is suitable for a 1 group espresso machine. The Brasilia part reference is 00614.2.00.08 This heating element produces 1800W at 230V, there are 4 connecting poles. The element has a immersed length of 170mm. The flange on this...

The heating element on this product page is used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722221, 5722246 and 5722423. This heating element produces 3300/3800W at 220/240V.there are in total 4 connecting poles on this heating element. The immersed length is 350mm and the flange has a diameter of 75mm....