Fittings

With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.

Brass nut 1/4" BSP-G for 10mm welding capReturn the nut overview page

On this page you will find a brass reduction. This reduction has on one side a female thread and on the other side a male thread. The male thread is a 3/8” BSP-G thread and the female thread is a ½”BSP-G thread. This item has been made from stock brass in Italy. It is possible that you receive the item with a nickel coating.

Copper tube 12x1mm sold per m0.8If you order multiple lengths, it is possible that you will receive multiple loose lengths

Brass L Fitting 1/8" BSP-G MF Return to our fitting overview

The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...

Brass nut 3/8" BSP-G for 8mm welding capReturn the nut overview page

Brass nut 1/4" BSP-G for 6mm welding capReturn the nut overview page

Brass half nut 1/2" 6mm

Brass L Fitting 3/8" BSP-G MM Return to our fitting overview

Brass nipple 3/8" x 3/8" MM BSP-G Return to our fitting overview

Brass L fitting 1/8" BSP-G MMReturn to the fitting overview

Brass nut 1/8" BSP-G for 6mm welding capReturn the nut overview page

Brass reduction 1/4"F x 1/4"M BSP-G Return to our fitting overview

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. You will see this type of fitting for instance on the water...

Nipple 3/8"M x 3/8"NPT M

Brass nipple 1/4"M x 3/8"M BSP-G Return to our fitting overview

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. This specific welding cap is used with a 8x1mm copper tube. The welding end nut used with this end cap is a 3/8”BSP-G with a internal diameter of...

T fitting 1/4" MMM

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

Copper tube 8x1mm sold per m0.8 If you order multiple lengths, it is possible that you will receive multiple loose lengths

Brass half nut 3/8" BSP-G  Return to our fitting overview

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...

The item on this product page is a T style fitting. This means that the fitting is mad ein the shape of the letter T. This version of the T fitting has all male threads. The threads used on this fitting are 3/8” BSP-G threads. The item is made from casted brass which has been machined. This item is made in Italy.

Copper tube 10x1mm. sold per m1 If you order multiple meters, it is possible that you receive multiple individual meters

L fitting 3/8" MF

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. To start, this welding end cap is a male thread instead of a...

Double nipple female 3/8"

Brass reducer 3/8" F x 1/4" M BSP-G Return to our fitting overview

On this product page you will find a brass end cap. This end cap has a female thread inside which has a ½”BSP-G thread. This item is made from machined brass. It is possible that you get a version which is also nickel plated.

Brass half nut 1/4" BSP-G  Return to our fitting overview

On this product page you will find a brass T fitting, which is solely male. This fitting has on each side a male ½”BSP-G thread. This item is made from casted brass and machined afterwards. It is possible that you receive a item which is brass or nickel plated brass.

T fitting 1/2" MMM

Brass nut 1/2" BSP-G for 12mm welding capReturn the nut overview page

Brass half nut 1/4" BSP-G Return to our fitting overview

Double nipple female 1/4"