Brass nut 1/2 for 14mm welding cap
Brass nut 1/2" BSP-G for 14mm welding capReturn the nut overview page
€2.29
0
My cart
Welding end cap dia 12 mm nut 1/2"
€2.29
€2.29 tax excl.
GDPR ComplianceProtecting your personal data
Shipping policyEverything about shipping your order
Return policyall the inns and outs about our return policy
On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak.
This is the biggest size of welding fitting you can find for espresso machines. This type can be found for instance on the feed and return tubing on a Faema E61 brewing group. In this location is high volume needed
Seen this is the biggest type of welding fitting, this also uses the biggest size of copper tubing. The outer diameter of these copper tubes is 12mm with a wall thickness of 1mm. the type of welding fitting used is a ½”female BSP-G fitting with a central hole with a diameter of 14mm.
36-062-8F46-P
24 Items
Data sheet
- Fitting thread 1
- 1/2" F
- Tubing outer diameter
- 12mm
- Type of thread
- BSP-G
- Type part
- Welding cap
Comments (0)
No customer reviews for the moment.
Related Product
Copper tube 12x1mm
Copper tube 12x1mm sold per m0.8If you order multiple lengths, it is possible that you will receive multiple loose lengths
€15.70
8 other product
Copper tube 8x1mm
Copper tube 8x1mm sold per m0.8 If you order multiple lengths, it is possible that you will receive multiple loose lengths
€7.99
Copper tube 10x1mm
Copper tube 10x1mm. sold per m1 If you order multiple meters, it is possible that you receive multiple individual meters
€10.69
Welding end cap dia 6 mm nut 1/4"
On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...
€1.02
Fitting 1/2" hole dia 14mm length 28mm
A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. To start, this welding end cap is a male thread instead of a...
€3.69
Welding end cap dia 10 mm nut 3/8"
On this page you will find a brass welding cap. These welding caps are used to make a water tight seal between valve components and the copper tubing. This specific model of welding cap needs for soldering 10mm copper tubing. The weld nut used in combination with this welding cap has a 3/8”female thread and a opening in the middle of 13mm.
€1.31
Copper tube 12x1mm
Copper tube 12x1mm sold per m0.8If you order multiple lengths, it is possible that you will receive multiple loose lengths
€15.70
Brass nut 3/8" hole dia 12,5mm h 17mm
The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...
€2.84
Welding end cap dia 6 mm nut 3/8"
On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. This size of welding end cap is mainly used for making tubing for pressure switches. So...
€1.78