Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Lower water level fitting

The item on this page is a lower water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53001 and the Wega part number is WY53001  This lower water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to attach the water...
€46.08

Faema E61 heating element 3 group 3700W 230V

The heating element shown on this page is suitable for various 3 group Faema espresso machine models such as the Faema E61, Faema President and the Faema Urania. This element produces at 220V 3700W. There are 4 connecting poles. The immersed length of the element is 455mm. The flange is a typical Faema style flange of 95x57mm. In the middle of the flange...
€85.50

La Pavoni Europiccola boiler cap o ring

This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...
€1.09

faema PTFE gasket 15x10x2.5

On the back of the Faema Zodiac brewing group is a top nut and a bottom nut. The top nut needs to be sealed off. Otherwise the water will leak out of it. You would have the choice of a fibre gasket but also a PTFE gasket. On this page you will find the PTFE gasket. The dimensions of this PTFE gasket measure a outer dimension of 15mm a inner dimension of...
€3.28

Conti lever group fork

This item is the top section of the lever mechanism used on the Conti lever brewing groups. The Conti part reference on this item is 201800  This chrome plated lever group fork is used to transfer the pulling motion of the lever to a vertical movement. That of the piston. This item has been made from chrome plated brass. This item is available on...
€43.59

Pavoni pre-millenium tamper 49.5mm American walnut

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94

Faema E61 expansion valve spring

Faema E61 stainless steel expansion valve spring. This spring has a total length of 32.5mm and a external diameter of 15mm.This spring makes sure that the valve opens at the right over pressure. Return to the Faema E61 valve parts overview
€2.20

La Carimali return spring

The item on this product page is a OEM/Original Carimali spare part, it is the lever return spring. So it is not the main compression spring. This spring is available on request.
€38.63

Compression spring 13x42mm

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This is the spring located in the upper section of the brewing group, in the trumpet/mushroom. This stainless-steel compression spring has a outer diameter of 13mm. The length of this compression spring is 42mm. This spring has been made in Italy. This...
€2.02

Bearing holder pin

On this product page you will find the bearing pin used in a variety of lever espresso machines, such as Astoria, Wega, Pavoni and Brasilia. This pin has a knurled middle piece. On that location the chrome plated lever fork will be installed to. And next to that you will get 2 bearings. These are secured with 2 shaft clips. This item is OEM/Original...
€21.76

Arrarex Caravel seal set 1.0 - 1.3

On this product page you will find a gasket set suitable for the VAM Caravel and Arrarex Caravel lever espresso machines. This model set is not suitable for other models of the Arrarex Caravel then the 1.0 to 1.3 models. This gasket set has the following items in them         1x sillicone portafilter gasket;          1x sillicone o-ring;          2x hpu...
€38.43

Gaggia rubber ring

This rubber o ring is used on the Gaggia brewing groups C70/C80 and is used on the flange side of the brewing group. This o ring is made from EPDM and has a cord diameter of 1,78mm and a internal diameter of 25,12mm. This o ring is made in Italy.
€1.90

Faema Marte/Mercurio lower gasket

Faema Marte/Mercurio lower gasket. this is the gasket which makes the inner sleeve water tight.This sleeve can only be safely removed with a custom made key. you can try it with a punch, this can work. but the chance on damaging the part is also present.Return to the Faema parts overview
€17.66

Astoria lever pin

On this page you will find a lever fork pin suitable for brands such as the Astoria and Wega. Note, there are more versions available This blank steel pin (so they do rust) is the link between the lever and the piston shaft. This pin has been knurled on one side, this side also grabs into the brass lever group fork. This lever pin is a OEM/Origina (part...
€20.16

Fitting 1/4" x 1/4" MM

With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€3.82

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.