Filter by
Filter

Faema Marte

Our selection of Faema Marte spare parts

Title: Uncovering the Timeless Elegance of the Vintage Faema Marte Espresso Machine

Introduction:

In the world of coffee aficionados and collectors, few espresso machines hold as much allure as the vintage Faema Marte. With its classical design, timeless elegance, and a rich history dating back to the 1950s, this espresso machine effortlessly captures the essence of vintage charm. In this article, we will delve into the features, history, and enduring popularity of the vintage Faema Marte, celebrating its contribution to the coffee culture.

Faema espresso machine Spare Parts - Marte

Faema Marte mercurio shaft gasket

Are you rebuilding your Faema Marte or first series Mercurio. Then it is always handy to replace the shaft gasket.To replace this part you need to do the following things:Remove the piston from the piston rod; Remove the 2 screws on each side of the top of the group; pull the piston shaft true the top of the lever housing; now you can remove the bottom...
€17.06

Filterholder gasket 72.5x57x8 mm

On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
€2.42

Faema marte/mercurio upper group gasket

Faema marte/mercurio upper group gasket. and how do you need to replace the old one with a new:Unscrew the 4 bolts on top of the group; pull the group assembly out of the brewing group; if you look inside the inner ring has a gasket, remove the old gasket and replace it with the new one; do the above things the other way aroundReturn to the Faema...
€12.69

Faema E61 steam valve knob

On this product page you can find a steam and water valve knob suitable for a variety of older Faema lever espresso machines. Note: this knob isn’t made from Bakelite like the originals. This plastic steam and water valve has in the middle of the knob a square bushing which can accept a shaft of 7x7mm. The knob has been made in Italy. This steam and water...
€12.19

Faema E61 valve rod spring

This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
€0.74

Faema lever group back rubber bumper

On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.
€2.98

Lever V piston gasket 51x38x7.5mm

On this page you will find a piston gasket suitable for multiple espresso machine models. You can find this piston gasket on Rancilio, Faema and Aurora Brugnetti Lever groups. The outer diameter of this piston gasket is 51mm, the inner diameter is 38mm and the thickness of the gasket is 7,5mm. On Rancilio espresso machines you can use them on the Rancilio...
€2.59

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€2.75

IMS E61 style shower screen

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€17.50

Faema E61 filterholder gasket 8.5 mm

Faema E61 filterholder gasket 8.5mm nbr. The middle size portafilter gasket available for the E61 brewing group. There are 3 thickness sizes available for the E61:8mm; 8,5mm; 9mm.If your portafilter doesn't fit as you want, there are always thinner shims available to add to the gaskets:0,5mm; 0,8mm.It's always handy to purchase some gaskets extra,...
€2.43

Faema E61 filterbasket double 12gr

Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
€4.26

Faema Marte sight glass axle

Faema Marte sight glass axle. This axle is on some models of Faema Marte on the side of the sight glass. It is made from chrome plated brass.Return to the Faema Marte parts overview
€126.89

Faema bottomless portafilter

The bottomless portafilter on this page can be used on a variety of Faema espresso machines. This bottomless portafilter can be used on the antique lever espresso machines as well on the E61 brewing groups. This bottomless portafilter comes with a standard style of handle. The ear orientation is at 90 degrees. The thickness off the ears is 7,2mm. This...
€39.79

Safety valve 3/8" 2.0 bar CE PED IV certified

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.64

Faema E61 sight glass 12x175mm

The sight glass on this page is used on a variety of Lever espresso machines by the brand Faema. This sight glass can be used on models such as the Faema E61, Faema President and the Faema Lambro espresso machine. The sight glass has a outer diameter of 12mm and a overall length of 175mm. This sight glass has been made in Italy. The gasket you need for...
€3.44

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€7.19

Faema E61 filterbasket single 7gr

Stainless steel single filterbasket suitable for a Faema E61 brewing group. The basket can contain 7grams of coffe. The outside diameter is 69,5mm and the height of the basket is 24mm.If you are looking for a double filterbasket click there. Return to the Faema E61 group parts overview
€3.78

Stainless steel pressure switch bracket

Pressure switch bracket made out of stainless steel 304. The bracket has a length of 90mm and a width of 18mm. This bracket is intended to fix one side to a boiler stud or inbetween a boiler bolt (up to M10).The other side is suitable to fit a pressure switch with a 1/4" BSP-G connector. 
€7.53

Faema E61 heating element gasket 57x43x3mm

On this page you will find a heating element gasket we had made out of AFM34 a food safe fibre material, made in Germany. This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This heating element gasket can be used on a variety of heating elements such as the Faema E61, Faema E61 Legend, Faema E61...
€3.00

Faema Marte/Mercurio lower gasket

Faema Marte/Mercurio lower gasket. this is the gasket which makes the inner sleeve water tight.This sleeve can only be safely removed with a custom made key. you can try it with a punch, this can work. but the chance on damaging the part is also present.Return to the Faema parts overview
€12.69

Faema Marte/Mercurio filling lever

Faema filling lever. This lever is used on the Faema Marte and first series of Faema Merucrio espresso machines.It can occur that this part is missing, seen it is easy detachable. So now we make a new one machined from brass and chrome plated. They are made on request.Return to the Faema parts overview
€283.63

Portafilter gasket 73x57x9mm red silicone

On this product page you will find a portafilter gasket, but not a standard one. This portafilter gasket has been made from food grade silicone, in the colour red.  This product has been made in Italy. The gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 9mm. You can use this on a variety of brands such as the Vibiemme...
€2.98

IMS faema double cup filterbasket 18/22gr

The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. This double filterbasket on this page has the IMS product code B702TCH28.5E or B702TH28.5E This single filterbasket can hold ground coffee from 18 grams up to...
€17.99

Lever group shower 57mm

A lever brewing group uses slightly different parts then a normal pump driven espresso machine. This is the same story for the shower screens used. This shower screen made by the Italian company IMS Filtri is a example of this. This shower screen clamps around the sleeve of the brewing group to keep it into place. The outer diameter of this shower screen...
€9.19

Faema E61 heating element 1 group 1500W 110V

Have you ever wanted to convert your single group Faema lever espresso machine from a 220-230V version to a 110V version, now you can. The heating element on this product page is suitable for installation on various antique Faema Lever groups and regular Faema E61 groups. This heating element has the typical Faema type of brass flange. The element is...
€65.90

Portafilter gasket suplement 72x58x0.8mm

The paper gasket is one of the items you rarely find as a OEM or Original Item. But it is one of the most important items to keep your machine functioning. Over time the brewing group and portafilter locking systems wears, so there will be more space then original. This small spaces can be filled with the paper shims. This can fix the problems of not...
€0.50

Asco/Sirai pressure switch P303/T01 3 phase 20A

On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...
€78.46

Asco pressure switch P302/6

The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...
€68.99

Faema mercurio marte valve guide

Faema mercurio marte valve guide. This is a complete valve guide for the mercurio and marte espresso machines. This one has a shorter valve guide then the E61 model.Return to the Faema parts overview
€23.54

IMS Faema single cup filter basket 7/9 gr

The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€18.39

Faema filterbasket 21gr

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Faema, Grimac, Astoria, Wega, Rancilio and Conti. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is IMS3T011. Note: this is not a competition filterbasket. This stainless steel...
€4.47

Lever piston W gasket 50x38x7.5mm

On this page you will find a piston gasket suitable for multiple espresso machine models. You can find this piston gasket on Rancilio and Faema Lever brewing groups. The outer diameter of this piston gasket is 50mm, the inner diameter is 38mm and the thickness of the gasket is 7,5mm. On Rancilio espresso machines you can use them on the Rancilio Z9,...
€3.08

1. Aesthetics that Transcend Time:

The vintage Faema Marte espresso machine showcases a design that transcends time. With its iconic curves, polished chrome exterior, and intricate detailing, this espresso machine will surely captivate the hearts of coffee enthusiasts and collectors. Every part, from the engraved logo to the elegant control knobs, exudes an air of sophistication that has stood the test of time.

2. Craftsmanship and Durability:

Crafted with meticulous attention to detail, the Faema Marte is a testament to Italian craftsmanship. Built to last, this espresso machine boasts durable materials, such as brass and stainless steel, ensuring longevity and resilience. With regular maintenance and care, this vintage beauty will continue to brew delicious shots of espresso for generations to come.

3. A Timeless Brewing Experience:

The Faema Marte offers a brewing experience that is both nostalgic and exceptional. Equipped with a reliable and efficient heating system, it produces consistent and well-balanced espresso shots. With its classic lever-operated design, every pull becomes a delightful ritual, allowing baristas and coffee enthusiasts to be part of the brewing process and create their perfect cup.

4. A Glance into History:

Dating back to the 1950s, the Faema Marte espresso machine represents an era when the coffee culture was booming, and craftsmanship was at its peak. As a pioneer in the coffee industry, Faema introduced innovative technologies to enhance the espresso-making process and deliver unparalleled quality. Owning a vintage Faema Marte is not just about possessing a beautiful espresso machine; it is owning a piece of coffee history.

5. The Revival of Vintage:

In recent years, there has been a resurgence in the popularity of vintage espresso machines. Collectors and coffee enthusiasts appreciate the authenticity and character that vintage machines bring to their brewing routine. The Faema Marte, with its distinctive design and historical significance, has become a sought-after gem among enthusiasts, creating a vibrant market for these timeless machines.

Conclusion:

The vintage Faema Marte espresso machine is more than just a coffee-making instrument; it is a work of art and a testament to the rich history of coffee culture. Its timeless design, craftsmanship, and enduring popularity continue to captivate enthusiasts today, celebrating a bygone era of elegance and meticulous craftsmanship. Owning a Faema Marte allows coffee lovers to experience the essence of yesteryears while indulging in the pleasure of brewing a perfect cup of espresso.