0
My cart
espresso machine brands
Astoria portafilter gasket 66x56x6mm
On this page you will find a portafilter gasket specially suited for lever espresso machine brewing groups. This specific portafilter gasket is suitable for brands such as the Astoria, Pavoni, Wega, Victoria Arduino, Fiorenzato and Brasilia lever groups. (seen they are the same model of group) This specific gasket has been made from NBR. This gasket has a...
€3.18
Faema E61 legend pump motor
Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
€260.91
Faema E61 group spout breaker
The item shown on this page is the last item on a Faema E61 brewing group, as well on some other e61 style brewing groups. This is the drain fitting which is all the way on the bottom of the brewing group. This model of drain can be used on the brands Faema, Grimac, Pavoni and Wega espresso machines. The Faema part reference for this item is 4152135921,...
€9.31
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€3.82
La Pavoni Europiccola plastic drain tray
The La Pavoni (and Gaggia) plastic drain tray (371104) is used on a variety of models like the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Romantica and finally On the Gaggia 105(S371104). The plastic drain tray hasn’t been there from the beginning. The first la Pavoni’s had a flat surface where you needed to put your coffee cup. Later on,...
€7.79
O ring 20.63x2.62mm
On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...
€2.95
La San Marco lever group balancer
La San Marco lever group balancerReturn to the La San Marco parts overview
€55.37
Pavoni pre-millenium tamper 49.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94
Gaggia flat rubber gasket
This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18
Rancilio boiler manometer 0 - 2.5 bar original
Rancilio boiler manometer 0 - 2.5 bar. Fitting 1/8" M original
€92.14
La Pavoni Piston gasket
La Pavoni Piston gasketReturn to the La Pavoni Bar modern parts overview
€12.16
Conti portafilter double spout
The portafilter on this product page is a 2 coffee portafilter which can be used on the Conti lever espresso machine groups, as well as the regular solenoid valve operated brewing groups. The filter holder body has the Conti part reference number 4056791. The portafilter has a ear orientation of 90 degree, with a thickness of the ears of 7,5mm. This...
€67.03
Faema E61 stainless steel valve rod
On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...
€13.15
La Carimali piston ring
The o ring on this product page is the inner piston o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 3,53mm the inner diameter is 28,17mm and the o ring has been made in Italy.
€1.68
Heating element gasket 41x33x3mm
On this page you will find a fibre gasket with a outer dimension of 41mm a inner one of 33mm and height of 3mm. This fibre gasket is used for a heating element with a flange diameter of 1”. This specific heating element gasket is used for Bezzera(5492004) espresso machines with the models: Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus and the Bezzera...
€4.00
Gaggia italia gasket and shim set
Gaggia italia gasket and shim set. This set contains 4 inox shims and 4 v piston seals
€133.44
Faema Marte sight glass axle
Faema Marte sight glass axle. This axle is on some models of Faema Marte on the side of the sight glass. It is made from chrome plated brass.Return to the Faema Marte parts overview
€165.82
La Cimbali copper gasket
La Cimbali copper gasket. this part is used to seal off the inspection/cleaning plug on the back side of the M15 brewing group.Rreturn to the La Cimbali Parts overview
€1.32
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
La San Marco O ring 74.6x5.9mm
La San Marco o ring 74.6x5.9mmReturn to the San Marco group parts overview
€4.96
Bezzera Ellisse steam and water gasket holder
The item on this product page is a Bezzera Bushing. This brass bushing is a OEM/Original Bezzera spare part. The Bezzera spare part number for this item is 5224605. This part is made from machined brass. The outer diameter is 14,7mm, the height is 10,5mm and the central hole is 6,5mm. This bushing is made in Italy. This bushing can be used on the Bezzera...
€3.47
Elektra microcasa silicon sight glass gasket
On this page you will find a silicone sight glass gasket, with this seal there is a water tight seal between the glass and the body. This gasket can be used on the Elektra Microcasa lever espresso machine. This item has the Elektra part reference of 00119035 This silicone gasket has a outer diameter of 15mm a inner diameter of 9mm and a thickness of 8mm.
€2.77
La Cimbali HX long 210mm dia 42mm
La Cimbali heat exchanger (HX) has a total length of 210mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...
€63.54
Brass steam pipe bushing
On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€5.04
Faema E61 small square rod 6mm
On this product page you will find a key component for a Faema E61 and Wega E61 style brewing group. this square brass valve pin has the Faema part reference of 4161135916 and the Wega part reference of W10349. This small brass valve pin screws on top of a gasket holder. The square is 6x6mm. In the middle is a female M3 thread. This item has been made in...
€1.44
Astoria and wega level glass cover painted white
On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This OEM/Original...
€13.95
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.