Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Gaggia lever group pinion gear

It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
€100.96

Faema E61 steam tap gasket press

This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...
€2.32

La Pavoni Europiccola brass washer

The item on this product page is a brass washer which can be used on various domestic La Pavoni and Gaggia Lever espresso machines. This includes pre-millennium and Millennium brewing group models. This washer is used in the steam valve. This washer spreads the force equally over the shaft gasket. There are 2 washers installed in each valve. The Gaggia...
€4.16

Faema E61 Legend and Jubilee front lower feet

These machine feet are used on the Faema E61 Legend and the Faema E61 Jubilee. They can be used on the front left as the front right feet, which have both the part number 3515-135 856. These feet do come with the rubber insert 4991-136 040 These feet are made from polished aluminium. The top section has a diameter of 35mm and the bottom section has a...
€55.37

Vibiemme right lever group screw

This oddly looking screw is the right brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRDPI  This screw can only be used on the right side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on...
€29.76

Bottom fitting for boiler pipe 1/2"M 1/2"M, hole 1/4"F

If you are converting your Faema e61 with a new boiler, it can be practical to order this boiler fitting at the same time. As you can see, the new boiler does not come with this fitting. This fitting, cast and machined from brass, has a ½ ”BSP-G male thread on 2 sides. And on one side a ¼ ”BSP-G female thread. So screw it into the bottom of the HX on one...
€17.11

Faema E61 pump manometer

On this product page you will find a pump manometer suitable for the vintage Faema E61 but also for the modern Faema E61 Jubilee and the Faema E61 Legend espresso machines. The part reference for the Faema E61 Legend and Jubilee is 3781135801  This pressure gauge has a scale which goes from 0 – 16 bar of pressure. The body has a outer diameter of 52mm and...
€22.16

Faema E61 lever knob

The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910  This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
€12.04

La Pavoni Europiccola plastic drain grid

For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one.  On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...
€15.84

Brasilia valve washer

The item on this page is a steam and water valve washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item is 12153.0.00.03. This washer is made from machined brass. the outer diameter is 10,7mm, the inner diameter is 8,2mm and the thickness is 2mm. this washer is made in Italy. You can use this brass washer on...
€1.31

Pavoni Europiccola post millenium group shower 54mm

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...
€7.67
Arrarex Caravel portafilter and filter basket Arrarex Caravel portafilter and filter basket
  • Out-of-Stock

Arrarex Caravel portafilter and filter basket

A set of our own portafilter and new filterbasket, you can select which type of diameter filterbasket you would like.Basket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mm Return to the overview of Arrarex Caravel parts  
€120.23

Faema E61 filterbasket single 7gr

Stainless steel single filterbasket suitable for a Faema E61 brewing group. The basket can contain 7grams of coffe. The outside diameter is 69,5mm and the height of the basket is 24mm.If you are looking for a double filterbasket click there. Return to the Faema E61 group parts overview
€5.26

Pavoni millenium tamper 51.5mm American walnut

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...
€67.93

Faema E61 camme holder

The cam holder shown on this page can be used on the Faema E61 and the Faema E61 Legend. The ones used on the E61 style brewing groups have a different shape. The Faema part reference for this item is 4152135911. This item has been machined from a solid piece of brass. After machining and polishing it has been nickel and chrome plated. This item has been...
€36.78

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€10.91

Faema E61 group spring 14x33mm

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the bottom exhaust valve. When the lever is in the lowest position the valve assembly will push this spring inward and the exhaust valve will open completely. This will make sure that all the exhaust water goes out...
€2.17

Faema E61 heating element 2 group 2600W 110V

The element shown on this product page can be ideal to make from your 220/230V Faema E61 a 110V model. This heating element has the typical Faema type of brass flange. The element is powered at 110V and supplies 2600W. The immersed length of the element is just 350mm. The heating element gasket used for this element has a outer diameter of 57mm a inner...
€91.45

Brooks 50mm tamper with birch handle

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...
€56.04

La Pavoni Europiccola chrome level pipe nut

The item on this page is a OEM/original La Pavoni sight glass nut. This sight glass nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3132034. When you tighten this fitting, the sight glass seal will get firmly around the sight glass and prevents leaking. This part has been made from...
€15.04

Conti piston gasket 61mm

The piston gasket on this page is used on various Conti lever brewing groups. The Conti part reference for this item is 200510.  This piston gasket has been made from NBR. The outer diameter is 61mm, the inner diameter is 47mm and the thickness is 6,3mm. This item has been made in France. You can use this piston gasket on the CC100 PM lever brewing...
€5.76

Faema E61 sticker 2 group

Faema E61 sticker 2 group for the glass plate on the back of the machine. Is your glass plate broken, we do also offer a new glass plate for this sticker. And to finish it off a new set of glass plate nuts Return to the Faema E61 body parts overview
€24.23

Fiorenzato o ring upper brewing group

A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The upper o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 58,74mm. This specific o...
€4.08

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.