When you replace gaskets in your espresso machine it might be handy that you use some kind of lubricant to lubricate your o rings or rubber like gaskets. But you don’t replace gaskets that often, then the need for a big tube of silicone grease is not a necessity. In this case we have a small, closable, tube of silicone grease. This tube contains 6 grams...
If you are restoring a Faema E61 or rebuilding a Faema E61 legend it is possible that you find a broken lever mechanism bracket. Now you can replace them. If you start the brewing process on your Faema E61 group, you raise your lever control arm. This pushes down the micro control lever. This control lever is attached to a metal rod. This metal rod is...
This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...
The item on this product page is a male 3/8” plug. These plugs have various applications, but mainly as it indicates, closing off something. This male plug is normally used with PTFE tape or with a flat gasket/copper gasket. This male plug has a 3/8” thread, the tread type used is a BSP-G thread. This item has been made in Italy.
The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has been...