La Cimbali filterholder gasket 8mm
Portafilter gasket 71x57x8mm for La Cimbali brewing group made of nbr rubber. This portafilter gasket is also compatible with the La Cimbali M15, Rubino, and Gran Luce espresso machines.
€2.89
0
My cart
espresso machine brands
La Pavoni Europiccola chrome lever
The item on this page is a OEM/Original La Pavoni spare part. This item is the lever of the lever brewing group. This item is compatible with a lot of pre-millennium as well as millennium brewing groups. This lever can be used on various domestic La Pavoni and Gaggia lever espresso machines. The La Pavoni part reference for this item is 3954004 and for...
€45.08
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€4.21
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
La Pavoni Piston gasket
La Pavoni Piston gasketReturn to the La Pavoni Bar modern parts overview
€12.16
Bezzera conical ptfe seal 12x5x6mm
The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...
€6.91
valve rod washer 22.15x13x1.2mm
valve rod washer 22.15x13x1.2. Suitable for:CodeProducer590-715-000 Cimbali590715000 Faema
€1.52
La San Marco Probe level gasket 16.5x6.5x1mm
La San Marco wasserschauglass dichtung 16.5x6.5x1mm
€2.21
Elektra Microcasa bakelite portafilter handle M10
On this product page you will find the Bakelite handle used on various locations on the Elektra Microcasa a Leva. This lever handle can be used on the lever handle and as the portafilter handle. The part reference number of this part is 00469035 This Bakelite handle needs to be screwed into a metal stud which has a M10 thread (00186035)
€14.98
Elektra Microcasa pressure gauge brass
On this product page you will find a pressure gauge which can be used on the domestic lever espresso machine the Elektra Microcasa. This is the model in brass, there is also a chrome colour available. The Elektra part reference for the brass manometer is 00398035 This manometer is a boiler pressure gauge which goes from 0 – 3 bar. The outer diameter of...
€28.16
La Carimali piston ring
The o ring on this product page is the inner piston o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 3,53mm the inner diameter is 28,17mm and the o ring has been made in Italy.
€1.68
Lever group shower 57mm
A lever brewing group uses slightly different parts then a normal pump driven espresso machine. This is the same story for the shower screens used. This shower screen made by the Italian company IMS Filtri is a example of this. This shower screen clamps around the sleeve of the brewing group to keep it into place. The outer diameter of this shower screen...
€12.79
La Pavoni Europiccola chrome stuffing nut
The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...
€7.06
Arrarex Caravel Portafilter handle
This replacement Arrarex Caravel Portafilter handle is made from black delrin. This handle is suitable as a replacement handle for a original bakelite one, it has a m7 thread on the inside like the original portafilter.Return to the Arrarex Caravel parts overview
€41.54
Gaggia Italcrem ball bearing
Gaggia Italcrem ball bearingReturn to the Gaggia Italcrem lever group parts overview
€8.75
La Pavoni Europiccola brass boiler fixing ring
For the La Pavoni Europiccola there haven been a variety of boiler fixing rings. It started in the 60ies with the steel boiler rings, from the 1980’s you will find the brass boiler rings. These have 3 m6 bolt holes for installing the heating element, there is also a attachment point for the ground wire. Around the turn of the century La Pavoni introduced...
€95.37
La San Marco lever handle
La San Marco lever handle. The lever doesn't come with the handle and top screw. these can be ordered seperatelyReturn to the San Marco group parts overview
€61.77
Astoria Wega steam pipe chrome plated Original part
Astoria Wega steam pipe chrome plated Original part
€57.58
Rancilio boiler manometer 0 - 2.5 bar original
Rancilio boiler manometer 0 - 2.5 bar. Fitting 1/8" M original
€101.35
La Pavoni Europiccola black boiler knob
The item on this page is a OEM/Original La Pavoni espresso machine part. This boiler knob can be used on various domestic lever espresso machines. This item has the La Pavoni part references 26872 and 47700308 This boiler knob screws in the top of the boiler. This boiler knob does not come with the sealing o ring. The knob has been made in the EU. You...
€59.28
Procon flange pump 100 L/H
The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...
€180.99
La San Marco piston washer
La San Marco main piston washerReturn to the La San Marco parts overview
€14.39
Faema filterbasket 21gr
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Faema, Grimac, Astoria, Wega, Rancilio and Conti. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is IMS3T011. Note: this is not a competition filterbasket. This stainless steel...
€6.22
La San Marco lever lower valve cap
La San Marco lever lower valve cap. this cap holds the group gasket holder spring in place.Return to the San Marco group parts overview
€12.56
Vibiemme left lever group screw
This oddly looking screw is the left brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRPIS This screw can only be used on the left side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on the...
€29.76
Silicone gasket 12.3x5.6mm
Silicone gasket 12.3x5.6mm. Suitable for:CodeProducer95.05031 Carimali30370060 Expobar11181302 Futurmat-ArieteL165/5 Marzocco362074 Pavoni9007703 Reneka10505558 SanremoGUARSILRUBEVO VibiemmeGUARTECIECARK Vibiemme
€1.19
Nuova Simonelli heating element 3/4 group 5000W 230/380V
Nuova Simonelli heating element 3/4 group 5000W 230/380V L 570mm
€182.60
Brooks Arrarex Caravel tamper base american walnut
As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...
€25.43
Plug 3/8" F
The item on this product page is a male 3/8” plug. These plugs have various applications, but mainly as it indicates, closing off something. This male plug is normally used with PTFE tape or with a flat gasket/copper gasket. This male plug has a 3/8” thread, the tread type used is a BSP-G thread. This item has been made in Italy.
€4.03
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.