La Pavoni Professional - Brewing group

The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

The filterbasket on this page is a 2 cup filterbasket made out of stainless steel. This specific model of filterbasket is suitable for La Pavoni post millennium lever brewing groups. The pre-millennium filter baskets won’t fit. The double filterbasket has a outer edge of 60mm and a height of 25mm. This filterbasket can hold approximately 12 grams of...

Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...

The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...

The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....

For the La Pavoni pre-millennium brewing group you also need a portafilter gasket. In the case of a pre-millenium brewing group a standard o ring is used. This o ring has a internal diameter of 47mm and a cord thickness of 5,34mm so a outer diameter of 57,7mm. This portafilter gasket can be used in a variety of pre-millenium models like the La Pavoni...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a complete steam valve for various domestic La Pavoni lever espresso machines. This steam valve can be used on Millennium as well on late models of the pre-millennium La Pavoni’s. This steam valve can only be used in combination with the steam tube with bayonet fitting. The...

La Pavoni Europiccola water level plug

The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...

the item on this product page is a sight glass gasket used on various domestic La Pavoni and Gaggia lever espresso machines. This sight glass gasket can be used on pre-millennium as well as on Millennium brewing groups models. The La Pavoni part reference for this item is 362020 and for Gaggia the reference is S362020  This sight glass gasket has been...

The 2 coffee filterbasket on this page is suitable for pre-Millennium La Pavoni Lever espresso machines. The La Pavoni part reference for this item is 327051. The IMS part reference for this item is PA2T101/H24/LF This double filterbasket on this page has a outer diameter of 58mm and a height of 24,5mm. This filter basket can hold about 12 grams of ground...

This set is suitable for La Pavoni Professional pre millennium.  465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler gasket 1x362081 - boiler gasket 1x 361023 -...

La Pavoni portafilter gasket 60x50x5,5mm. Only suitable for Millenium machines

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...

The item on this page is a OEM/Original La Pavoni spare part. This item is the lever of the lever brewing group. This item is compatible with a lot of pre-millennium as well as millennium brewing groups. This lever can be used on various domestic La Pavoni and Gaggia lever espresso machines. The La Pavoni part reference for this item is 3954004 and for...

The item on this page you will find a OEM/Original La Pavoni spare part. This nut can be used on La Pavoni pre-millennium and millennium lever brewing groups. This nut is used as a counter nut for the shaft nut. The La Pavoni part reference for this item is 3135264. This nut has a internal M10 thread. The key size for this nut is 14mm. the height of this...

On this product page you can find the portafilter one of the most iconic lever espresso machines. The La Pavoni home lever espresso machine. This portafilter can be used for a variety of Pre-millennium la Pavoni espresso machines. Such as the La Pavoni Europiccola, La Pavoni Mignon and the La Pavoni Professional. This portafilter is a double portafilter,...

On this page you will find a pressure gauge fitting for the domestic La Pavoni lever espresso machines. The part is a original OEM part with the La Pavoni part number 3120104. I want to install a manometer on my La Pavoni Europiccola can I use this item for it? NO. This item is not suitable on a La Pavoni Europiccola espresso machine. The threads used on...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You will find that type of brewing group on la Pavoni lever espresso machines such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The La Pavoni part reference for this item...

La Pavoni Europiccola complete group pistonReturn to the  Pavoni Europiccola group parts overview

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...

The steam tube on this product page is a OEM/Original La Pavoni product. This steam tube is used on various late model pre-millennium as well as millennium lever espresso machines. The La Pavoni part reference for this item is 3432374  This steam tube is installed with a bayonet fitting.  So there are no tools required. This chrome plated steam tube does...

The o ring on this product page is used on various La Pavoni and Gaggia lever espresso machines. This o ring is used to seal off the steam tube at the steam valve. This o ring can be used on later models pre-millennium and millennium steam valves. The part reference for La Pavoni is 465017. This o ring has been made from FKM. The cord diameter is 1,78mm...

The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on  various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003  and for Gaggia the reference is S313003  This washer is suitable for Pre-millennium as well for Millennium espresso machines....

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

The item on this product page is a OEM/original La Pavoni spare part. This chrome nut is used on top of various domestic lever brewing groups made by La Pavoni. This nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3135014. This nut has on the inside a M10 thread. The outer key size...

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni pre-Millennium brewing groups. You can use this brewing group for instance on the La Pavoni Europiccola, La Pavoni Professional and the La Pavoni Mignon. With...

This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...

On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...

This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...