Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Faema E61 group spout breaker

The item shown on this page is the last item on a Faema E61 brewing group, as well on some other e61 style brewing groups. This is the drain fitting which is all the way on the bottom of the brewing group. This model of drain can be used on the brands Faema, Grimac, Pavoni and Wega espresso machines. The Faema part reference for this item is 4152135921,...
€9.31

La Pavoni Europiccola heating element gasket silicone

On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
€4.03

Vibiemme drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99

La Carimali piston O Ring

The o rings used on this product page are the La Carimali piston o rings. Every piston uses in total 3 o rings to seal off the group. This o ring is made from EPDM. The cord diameter is 5,3mm and the inner diameter of the ring is 40,64mm. This item is made in Italy.
€3.18

Copper gasket 18x14x1.5mm

The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal off...
€2.23

Vibiemme right lever group screw

This oddly looking screw is the right brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRDPI  This screw can only be used on the right side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on...
€29.76

Lever group spring 140mm

On this page you will find a lever brewing group main spring. This spring is used to generate the pressure. This type of spring is quite common and will find it in a variety of lever espresso machines. This model has a overall length of 140mm and a outer diameter of 46mm. this spring has been made from standard spring steel and after that it got...
€34.56

Bezzera lever fork

On this page you will find a OEM/Original lever group fork made by the Bezzera brand from Italy. This fork is used in various lever brewing group models with the Bezzera brand. The part reference of this item is 5284501.01NC This lever fork is the connection between the piston and lever itself. This part has been made from casted and machined brass. After...
€45.36

Gaggia piston shaft

The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.
€174.30

Elektra portafilter chrome

The portafilter on this page is for the Elektra Microcasa a Leva. The Elektra part reference for this item is 00187021. The portafilter is made from brass and has been chrome plated, so it will match your chrome plated Elektra Microcasa. The handle on this portafilter is made from bakelite. The ears of the portafilter have a thickness of 5,5mm. This...
€150.02

Fluidotech clamp ring pump 200L/H

On this page you will find a Fluid o Tech espresso machine pump. The model specification of this pump is Standard. This pump has a clamp ring connection, so a stainless steel clamp is used to connect it to the motor. This pump can pump 200 L/H and is equipped with a balanced bypass. The in and outlet of this pump have a 3/8” BSP-G thread. The pump has...
€120.52

Faema E61 valve rod washer stainless

This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...
€0.74

Pavoni pre-millenium tamper 49.5mm European walnut

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94

Bezzera Heating element 220/240V - 1250/1450W

On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...
€55.63

E61 style groups shower without welding 60mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€3.02

Astoria lever group fork

On this page you will find a chrome plated lever group fork for various lever groups. This fork is responsible for transitioning the lever motion to a vertical motion. This chrome plated group fork can’t be used on the older AL lever groups as used by Astoria and Wega. That part is out of production. This specific item is OEM/Original item suitable for...
€74.25

Faema e61 rubber foots 25x6mm

It is quite common that the rubber feet of your Faema E61, Faema President, Faema E61 Legend or Faema E61 Jubile will break down. This can be due to age, cracking or just moving around. These rubber feet go in the bottom of the aluminium feet used on all these models, the modern adjustable feet have the part reference of 3515-135 857 and the fixed feet at...
€4.16

Bezzera heating element gasket EN 76x40x2mm

The heating element gasket on this page can be used on a variety of Bezzera espresso machine heating elements. The Bezzera part reference number for this item is 5492006 This gasket has a outer diameter of 76mm a inner diameter of 40mm and a thickness of 2mm. The material used is a fibre material. The Bezzera models you can use this on are the Bezzera...
€6.77

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.