O ring 23,52x1.78mm epdmReturn to the Faema E61 Legend water inlet parts overview

The item on this product page is a OEM/Original La Pavoni spare part. This item is the rubber foot which goes underneath various La Pavoni and Gaggia domestic lever espresso machines. The part reference for this item is for Gaggia S371101 and for La Pavoni 371101. This rubber foot has a outer diameter of 30mm and can be installed in the base plates with...

La Cimbali heat exchanger (HX) ring. This ring spreads equal amount of pressure to the HX and the seal inbetween the HX and the brewing groupreturn to the La Cimbali M20 overview page

The boiler safety valve on this page can be used on various La Cimbali espresso machines. This valve has a male ¼” BSP-G thread. It has been calibrated at a pressure of 1,8. This valve is a adjustable model. Inside the valve is a FKM seal and a stainless-steel spring. This valve is not certified. Made in Italy You can use this valve on the Cimbali on the...

On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...

Rancilio steam/water valve joint o ring 12,1x2,7mm

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...

Faema E61 brass expansion valve nipple Return to the Faema E61 valve parts overview

Faema E61 sticker 2 group for the glass plate on the back of the machine. Is your glass plate broken, we do also offer a new glass plate for this sticker. And to finish it off a new set of glass plate nuts Return to the Faema E61 body parts overview

It is always possible that your old heating element for your La Pavoni Europiccola, La Pavoni Romantica, La Pavoni Stradivari or your Gaggia 105 burns or gets a short. The other option is that you purchased a old model La Pavoni Europiccola and you want to convert your classic lever espresso machine to a proper 120V version. This model of heating element...

This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...

This gasket is used to lock the Faema E61 brewing groups to the frame of the espresso machine.

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview

Gaggia portafilter supplement

La San Marco steam/water stainless steel shaft

La San Marco gasket 39,5x50x5,5mmReturn to the  San Marco group parts overview

Astroia CMA style complete lever brewing group

The earlier models of the La Pavoni Europiccola already had some sort of a protection to keep the sight glass safe. These sight glass protectors were installed at the same moment that the sight glass was installed. Seen they needed to slide over the sight glass completely. In the 1990ies you get the first models of plastic cover, the stainless-steel cover...

On this page you will find the stickers which go on the front panel of the vintage Faema E61 and Faema President lever group. These can get damaged or not present at all. This set contains the Faema water level sticker descriptions, Massimo and Minimo. For the steam valve Vapore, for the water valve Scarico acqua. For the cup warmer valve the Scaldatazze....

La San Marco steam/water valve gasket spring

La San Marco lever group springs (pair)Return to the  San Marco group parts overview

Astoria portafilter double spoutReturn to the portafilter  overview

Faema E61 legend water level board

Faema E61 expansion valve gasket made out of nbr. This gasket makes sure that the expansion valve doesn't leak below the opening pressure of the valve. The gasket itself is seated in a valve guide which also has the function of spring guide for the expansion valve. Return to the Faema E61 valve parts overview

La San Marco lever handle

Have you ever wanted to convert your single group Faema lever espresso machine from a 220-230V version to a 110V version, now you can. The heating element on this product page is suitable for installation on various antique Faema Lever groups and regular Faema E61 groups. This heating element has the typical Faema type of brass flange. The element is...

Gasket for La Cimbali heating element with four holes (97x55x3mm). The gasket seals the gap between the heating element flange and the boiler flange. The gasket fits the La Cimbali Rubino, La Cimbali Gran Luce, and a variety of other La Cimbali M15 machines.Always clean the whole mating area for the gasket when changing a fiber gasket. This decreases the...

Bipolar switch green 16A 250V

On this page you will find a group locking gasket suitable for various Faema lever groups. This gasket goes inbetween the bottom part of the lever brewing group and the espresso machine housing. This gasket has been made from AFM34 of Victor Reinz. The gasket has a outer diameter of 86mm and a thickness of 1mm. It has been made in Germany. This gasket can...

Astoria Wega dichtung dampf/wasserhahn

Faema retention valve body Return to the Faema Zodiac lever parts overview

M15 HX gasket 93x45x2mm Return to the La Cimbali lever parts overview

This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...

Nuova Simonelli heating element gasket 67x55x3mm