Gaggia group shower dia 49mm

Faema E61 o ring 18,64x3,53 viton. This o ring seals off the bottom group mushroom. Return to the Faema E61 group parts overview

There we have a re-production of a original Arrarex Caravel portafilter. The portafilter has been casted out of stainless steel and with a black delrin handle. This is a normal version, so not a bottomless one. It is suited for the same style portafilters for the Arrarex Caravel and the VAM Caravel lever espresso machines Return to the Arrarex Caravel...

The o ring on this product page is the group sealing o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 1,78mm the inner diameter is 23,52mm and the o ring has been made in Italy.

This stuffing nut is used to set even pressure on the gaskets of the cam shaft used in the E61 brewing groups. This nut can be used on the classical Faema E61 as well as the modern E61 style brewing groups. Such as Bezzera, La Scala, Grimac, Isomac, Pavoni, Brasilia and Vibiemme. This stuffing nut has been made from nickel and chrome plated brass. The...

Re-production stickers for the Arrarex Caravel temperature contol 1.1 - 1.3. The stickers are full color prints on aluminiumReturn to the Arrarex Caravel parts overview

In a commercial and a domestic environment you do need to clean your espresso machine at the end of the day when you have used it, the Puly caff powder is ideal for this application. This specific model of the Puly caff powder contains 900 grams of powder, this is the biggest version so Ideal for a a high volume bar of restaurant. There are 2 smaller...

If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...

Faema la cimbali water inlet spring

Faema charging valve o ring 4.2x1.9mmReturn to the Faema E61 Legend water inlet parts overview

On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...

Brass nut 1/4" BSP-G for 6mm welding capReturn the nut overview page

La San Marco wasserschauglass dichtung 16.5x6.5x1mm

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni pre-Millennium brewing groups. You can use this brewing group for instance on the La Pavoni Europiccola, La Pavoni Professional and the La Pavoni Mignon. With...

The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...

The filterbasket on this page is a 2 cup filterbasket made out of stainless steel. This specific model of filterbasket is suitable for La Pavoni post millennium lever brewing groups. The pre-millennium filter baskets won’t fit. The double filterbasket has a outer edge of 60mm and a height of 25mm. This filterbasket can hold approximately 12 grams of...

Brass nipple 3/8"M x 1/2"M BSP-G Return to our fitting overview

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...

The item on this product page is a Bezzera Bushing. This brass bushing is a OEM/Original Bezzera spare part. The Bezzera spare part number for this item is 5224605. This part is made from machined brass. The outer diameter is 14,7mm, the height is 10,5mm and the central hole is 6,5mm. This bushing is made in Italy. This bushing can be used on the Bezzera...

This item is a conical ptfe gasket, which is used on various Bezzera espresso machines. This item is a OEM/Original Bezzera spare part. The Bezzera part reference number for this item is 5494002.  This conical gasket is made from PTFE. The outer diameter is 16,5mm, the inner diameter is 6mm and the thickness is 5,5mm. This gasket is made in Italy. You can...

For the La Pavoni pre-millennium brewing group you also need a portafilter gasket. In the case of a pre-millenium brewing group a standard o ring is used. This o ring has a internal diameter of 47mm and a cord thickness of 5,34mm so a outer diameter of 57,7mm. This portafilter gasket can be used in a variety of pre-millenium models like the La Pavoni...

E61 style upper sleeve. not for faema e61

Vibiemme upper sleeve

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are...

The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004.  The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...

On this product page you will find a single portafilter which is suitable for the Faema E61 Legend and the Faema E61 Jubilé espresso machines.. The part reference number for this item is 2771-135 804.The portafilter has 2 ears oriented at 90 degree. The ears have a thickness of 6,3mm. The spout connection on this portafilter is a 3/8” BSP-G thread. This...

Faema E61 brass expansion valve nipple Return to the Faema E61 valve parts overview

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

Faema E61 expansion valve 3/8" BSP-G. This complete valve is made in the same style as the original expansion valve. The valve consists of the following components:Faema E61 Expansion Valve Nipple; Faema E61 Expansion Valve Guide; Faema E61 Expansion Valve Gasket; Faema E61 Expansion Valve SpringReturn to the Faema E61 valve parts overview

This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...

These machine feet are used on the Faema E61 Legend and the Faema E61 Jubilee. They can be used on the front left as the front right feet, which have both the part number 3515-135 856. These feet do come with the rubber insert 4991-136 040 These feet are made from polished aluminium. The top section has a diameter of 35mm and the bottom section has a...

The big brother of the 1000W 120V is also available in 120V. The 1200W 120V heating element. This specific heating element is suitable for the La Pavoni Europiccola and the La Pavoni Mignon lever espresso machines. The La Pavoni product code is: 331337  As it’s smaller brother, this heating element is also completely made from stainless steel. The flange...

Faema single portafilter with shiny handle

On this page you will find a heating element used in Vibiemme(ELETRESD80022) espresso machines. To be precise in the dual boiler of the Vibiemme Replica and Vibiemme Chimaera. But it also used in the domestic espresso machine the Vibiemme Domobar Super. This specific heating element produces 800W with 230V on 50/60Hz. The element has 2 connections both...

On this product page you can find a steam and water valve knob suitable for a variety of older Faema lever espresso machines. Note: this knob isn’t made from Bakelite like the originals. This plastic steam and water valve has in the middle of the knob a square bushing which can accept a shaft of 7x7mm. The knob has been made in Italy. This steam and water...