La San Marco lever handle
La San Marco lever handle. The lever doesn't come with the handle and top screw. these can be ordered seperatelyReturn to the San Marco group parts overview
€61.77
0
My cart
espresso machine brands
Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
€104.03
Stainless steel pressure switch bracket
Pressure switch bracket made out of stainless steel 304. The bracket has a length of 90mm and a width of 18mm. This bracket is intended to fix one side to a boiler stud or inbetween a boiler bolt (up to M10).The other side is suitable to fit a pressure switch with a 1/4" BSP-G connector.
€10.48
Brooks Pavoni Europiccola pre millennium double portafilter American walnut
The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. For La Pavoni the part reference is 395307R, this reference is only there...
€94.94
Faema E61 Legend and Jubilee front lower feet
These machine feet are used on the Faema E61 Legend and the Faema E61 Jubilee. They can be used on the front left as the front right feet, which have both the part number 3515-135 856. These feet do come with the rubber insert 4991-136 040 These feet are made from polished aluminium. The top section has a diameter of 35mm and the bottom section has a...
€55.37
Elektra Microcasa o ring 31.42x2.62mm
Elektra Microcasa o ring 31.42x2.62mmReturn to the Elektra Microcasa parts overview page
€3.93
Asco pressure switch P302/6
The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...
€74.07
Faema E61 camme spring 15x25mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used at the cam shaft. This spring is compressed in the cam shaft assembly. Due to this compression the cam shaft gaskets will always seal off the shaft. This stainless-steel compression spring has a outer diameter of 15mm. The length of this...
€1.52
La Carimali filterholder gasket 69x57x7,5mm
This portafilter gasket can be used on various La Carimali espresso machines. The part reference for this item is 87.00122.00.19. This gasket has been made from NBR. The outer diameter is 69mm the inner diameter is 57mm and the thickness is 7,5mm. this gasket has been made in Italy. You can use this portafilter gasket on the Carimali Pratica, Carimali E9,...
€3.47
Faema E61 microswitch lever control bracket
If you are restoring a Faema E61 or rebuilding a Faema E61 legend it is possible that you find a broken lever mechanism bracket. Now you can replace them. If you start the brewing process on your Faema E61 group, you raise your lever control arm. This pushes down the micro control lever. This control lever is attached to a metal rod. This metal rod is...
€6.24
La San Marco type lever group complete
The brewing group on this product page is a La San Marco lever brewing group style. La San Marco is famous for still making various commercial lever espresso machines such as the San Marco 85 Leva. This lever brewing group is ready to install, but does not come with the counter flange and tubing which are installed on the back of the brewing group. This...
€1,120.50
La Pavoni copper gasket
La Pavoni copper gasketReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€3.31
Faema E61 brew valve assembly
The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab This valve assembly is used in...
€9.16
Rancilio stainless steel washer
Rancilio stainless steel washerReturn to the Rancilio group parts overview
€18.56
E61 valve guide 12mm
In the Faema E61 and E61 style brewing groups you can find a variety of square valve pins, in different shapes and heights. This square pin screws into the M3 thread situation on the valve gasket holder. This model is one of the more common model which is used with brands such as Wega, Faema and La Pavoni. The part references are for Wega WY27421012,...
€1.58
Lever group sleeve
On this page you will find the inner liner for a brewing group. This inner liner is used with a variety of espresso machine brands. This brass liner is pushed into place. It will be sealed off with 2 o ring, a bottom and a top o ring. To remove this liner it’s basically installation but the other way around. You can find this liner in a variety of lever...
€254.88
La Carimali piston spring
La Carimali piston spring Return to the Carimali lever parts overview
€35.67
Gaggia America sight glass gasket
The item on this page is a sight glass gasket which can be used on various older Gaggia espresso machine models. The sight glass on the Gaggia America has 2 seals, a inner and a outer seal. You can use this gasket for both applications. This gasket is made from EPDM in the Czech Republic.
€8.37
Elektra Microcasa steam valve body chrome
On this page you will find the steam valve of a Elektra Microcasa a Leva. This model is suitable for the chrome plated Elektra Microcasa. The reference part number for this valve is 00150021. This steam valve is screwed into the side of the boiler of the Microcasa lever espresso machine. This item is not serviceable.
€92.43
Faema E61 group spring 14x33mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the bottom exhaust valve. When the lever is in the lowest position the valve assembly will push this spring inward and the exhaust valve will open completely. This will make sure that all the exhaust water goes out...
€2.17
La San Marco group shower
La San Marco group showerReturn to the La San Marco product overview
€6.38
Faema President and E61 2 group glass
It is not uncommon that the back lid glass of your Faema E61 or Faema President breaks. Glass remains fragile in the end. On this page you will find a replacement glass for the 2 group espresso machine. The get rid of the sharp edge the glass has been cut with a small chamfer. This glass plate comes without a stickers. We do only have the stickers for the...
€276.34
La San Marco lever group gasket holder
La San Marco lever group gasket holderReturn to the la San Marco parts overview
€11.19
E61 style groups shower without welding 60mm
The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€3.02
La Pavoni Europiccola pre-millenium boiler and group kit
If have a wreck of a la Pavoni Europiccola lever espresso machine or you want to give your La Pavoni Mignon a complete overhaul. This set would be ideal for you. This set made for la Pavoni espresso machines with a pre-millennium brewing group. This is a generic set, so it is possible that not all parts apply to your pre-millennium espresso machine....
€42.58
Lucifer solenoid valve 2 way base mounting 220/240V 50/60Hz
Lucifer solenoid valve 2 way base mounting 220/240V 50/60Hz
€113.28
La San Marco ball bearing
La San Marco ball bearing 10mm for the non return valve assemblyReturn to the San Marco group parts overview
€1.68
La Pavoni Shaft Seeger Ring
The La Pavoni Shaft Seeger Ring is a high-quality component designed to securely hold the shaft gasket in place in your coffee machine. Made from durable stainless steel, this seeger ring ensures a long-lasting and reliable fit. It meets UNI 7437 and DIN 472 standards, with an external diameter of 21.5 mm. Key Features:Stainless steel construction...
€2.77
Faema E61 filterbasket double 12gr
Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
€6.46
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.