When you replace gaskets in your espresso machine it might be handy that you use some kind of lubricant to lubricate your o rings or rubber like gaskets. But you don’t replace gaskets that often, then the need for a big tube of silicone grease is not a necessity. In this case we have a small, closable, tube of silicone grease. This tube contains 6 grams...
The newer model of la Pavoni Europiccola and all the models of the Pavoni Professional use a modern pressure switch. Currently those are the Ma-ter Echo pressure switches. Seen these can’t be installed directly into the heating element (the pressure switch would stick out the bottom off the base). For this problem they have found a solution. In the...
Faema E61 expansion valve guide. This guide makes sure that the expansion valve gasket stays in it's place Return to the Faema E61 valve parts overview
The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...