Filter by
Price
€ €
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Safety valve 3/8'' 1,8 bar

On this page you will find a safety valve which has a male 3/8”BSP-G thread. The pre-set pressure of this valve is 1,8bar. You can adjust it yourself but not recommended. The spring inside the safety valve is made from stainless steel and the sealing material is FKM. The valve has been made in Italy. We do strongly advise to replace the safety valve every...
€15.27

Copper gasket 18x14x1.5mm

The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal off...
€2.23

La Cimbali HX gasket silicone 50,8x3,53mm

La Cimbali HX gasket silicone 50,8x3,53mm. the gasket is located inbetween the brewing group and the HX 150mm or the HX 210mm. And is compressed when you tighten the group bolts.Return to the La Cimbali M20 lever group overview
€3.48

La Pavoni Europiccola double filterbasket pre-millenium

The 2 coffee filterbasket on this page is suitable for pre-Millennium La Pavoni Lever espresso machines. The La Pavoni part reference for this item is 327051. The IMS part reference for this item is PA2T101/H24/LF This double filterbasket on this page has a outer diameter of 58mm and a height of 24,5mm. This filter basket can hold about 12 grams of ground...
€6.08

La Cimbali m15 heating element

La Cimbali Heating element for M15 espresso machine. The flange diameter fo the element is 98mm with 4 holes and probe holders. The element has a length of 230mmType flangedwatt 2700volt 230/380length (mm) 230
€78.13

Lever new brewing group cover

This black plastic cover is used with a variety of lever espresso machine groups. This keeps the mechanism clean and you won’t get your fingers stuck in the bearing mechanism. This plastic cover has been manufactured in Italy. This cover can be used for various lever brewing groups such as with the Astoria, the old La Pavoni groups, Wega Antares, Wega...
€23.36

Bezzera contact thermostat 95°C M4 250V 16A

On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...
€39.37

Faema Urania 9 hole boiler gasket

On this product page you will find a boiler gasket suitable for various Faema Urania boilers. This item is suitable for the first series of Faema Urania espresso machines. Not for the later ones which have similar boiler styles as the E61 and president. This PTFE boiler gasket has a outer diameter of 195mm a inner diameter of 155mm. The gasket has 9 holes.
€39.46

Faema E61 left lower group tube

On this page you will find the bottom tube which can be used on various Faema E61 espresso machine models. Note: this item is for the left group when you are standing at the back. The fitting on the boiler side is a female ½”BSP-G thread. On the other side of the tube at the brewing group there is a male fitting which is ½”BSP-G
€59.72
Arrarex Caravel bottomless portafilter Arrarex Caravel bottomless portafilter
  • Out-of-Stock

Arrarex Caravel bottomless portafilter

On this product page you will find a re-production of a original VAM/Arrarex Caravel portafilter. This item has been casted in the original shape as the original. To give it the look of the early original portafilters. In this case the bottom has been machined out the portafilter, so it is a bottomless portafilter. The handle is standard made from black...
€135.03

Arrarex Caravel double filterbasket set

A set of 2 our own custom made laser cut double filter baskets for the arrarex caravelBasket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mmWhat is the difference between a laser cut hole diameter of 0,25mm and 0,3 mm?We choose to make two hole diameters, because the flavor of the espresso completely changes. But using the...
€62.32
Gaggia America 1 group heating element Gaggia America 1 group heating element
  • Out-of-Stock

Gaggia America 1 group heating element

It is quite common that the heating element on the 1 group Gaggia America is broken. Finding the correct heating element for this espresso machine is quite difficult. Seen the espresso machine does have quite a shallow boiler, so a lot of elements won´t fit. This specific model does fit and produces 1200W at 230V. you can also upgrade your single group...
€142.62

La Carimali filterholder gasket 69x57x7,5mm

This portafilter gasket can be used on various La Carimali espresso machines. The part reference for this item is 87.00122.00.19. This gasket has been made from NBR. The outer diameter is 69mm the inner diameter is 57mm and the thickness is 7,5mm. this gasket has been made in Italy. You can use this portafilter gasket on the Carimali Pratica, Carimali E9,...
€3.47

Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
€104.03

Gaggia spring guide

The item on this page is a Gaggia lever brewing group spring guide, this item can be found on the Gaggia C70/C80 brewing groups. The spring guide, keeps the main compression spring centred, has been made from pressed copper. Limited stock available
€3.34

Aurora Brugnetti group locking gasket

The item on this product page is a group locking gasket for various Aurora Brugnetti brewing groups. As well as the old lever ones as well for the new solenoid valve operated groups. The Brugnetti part reference number for this item is 000460. This gasket is made from a fibre material. The outer diameter is 78mm, the inner diameter is 42mm and thickness...
€10.10

La Pavoni Europiccola switch + pilot light

This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...
€15.36

E61 valve guide 12mm

In the Faema E61 and E61 style brewing groups you can find a variety of square valve pins, in different shapes and heights. This square pin screws into the M3 thread situation on the valve gasket holder. This model is one of the more common model which is used with brands such as Wega, Faema and La Pavoni. The part references are for Wega WY27421012,...
€1.58

Bezzera Strega lever fork original

On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...
€61.77

Faema lever group back rubber bumper

On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.
€4.14

Lever group spring 131mm

On this product page you will find the main spring for a lever brewing group. This spring is mainly used on older models of Bezzera espresso machines. This spring has a overall length of 131mm. the outer diameter of this compression spring is 46mm. The material used for this spring is just regular spring steel which has been galvanized. You can use this...
€47.99

Brooks Arrarex Caravel tamper base american walnut

As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...
€23.12

Astoria and wega level glass cover painted white

On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This OEM/Original...
€13.95

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.