Home

This brass filter holder is used on the Faema E61 brewing group. This item has the Faema part reference of 4151135895. This brass filter holder slides over the nozzle in the op of the brewing group. In the widest section is the stainless steel filter placed with a brass ring on top of it. To keep the filter holder in place there is a nozzle spring...

There we have a fully restored Faema E61 single group vintage espresso machine. The process always starts with stripping down. to the point that there are a ton of body, frame and brewing group parts. Then the frame will be sand blasted and coated with a 2 layer powdercoating. This is also done for the black trim pieces.Then the original chrome plated...

The bottomless portafilter on this page can be used on a variety of Faema espresso machines. This bottomless portafilter can be used on the antique lever espresso machines as well on the E61 brewing groups. This bottomless portafilter comes with a standard style of handle. The ear orientation is at 90 degrees. The thickness off the ears is 7,2mm. This...

La Cimbali steam water valve M39

Basically, every lever espresso machine brewing group has a piston shaft and a lever fork, might look different but the idea is the same. These 2 items need to be connected to each other, so that the force can be transferred. That’s why you have a piston shaft pin. This pin is knurled on 1 side. When you install the pin, this knurling will tighten itself...

La San Marco group showerReturn to the La San Marco product overview

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

Faema E61 brass small non return valve. This valve guide is sealed by this o ring and kept on it's place with the non return valve spring. Return to the Faema E61 valve parts overview

The single portafilter shown on this product page is a OEM/Original Wega spare part. The part reference for the body of this portafilter is WY27311010, so not the entire portafilter. This portafilter is a 1 coffee model. The spout used has a 3/8” BSP-g thread and is open. The ears have a 90 degree orientation. The thickness of them is 6,5mm. the...

Rancilio steam valve sleeve

Dow111 Molykote 6gr

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

Gasket for La Cimbali heating element with four holes (97x55x3mm). The gasket seals the gap between the heating element flange and the boiler flange. The gasket fits the La Cimbali Rubino, La Cimbali Gran Luce, and a variety of other La Cimbali M15 machines.Always clean the whole mating area for the gasket when changing a fiber gasket. This decreases the...

Lip seal 15x8x4

On this product page you will find a re-production of a original VAM/Arrarex Caravel portafilter. This item has been casted in the original shape as the original. To give it the look of the early original portafilters. In this case the bottom has been machined out the portafilter, so it is a bottomless portafilter. The handle is standard made from black...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...

This item is a vacuum valve for various La Pavoni domestic lever espresso machines. This item is a OEM/Original La Pavoni spare part. The part reference for this item is 396754. This vacuum valve has been made from 2 brass components and a stainless-steel clip. The seal is made with the o ring around the shaft. You can use this vacuum valve on the La...

As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...

Elektra microcasa portafilter chrome

On this product page you will find a microswitch which can be used on the Faema E61 espresso machines. As well on the Faema E61 Legend espresso machines. The Faema part reference for this switch is Faema 532006600. This switch is rated up to 16A at 250V. This switch has a spring loaded metal pin. This pin get’s pushed inwards when the lever of the group...

The portafilter on this product page is a 2 coffee portafilter which can be used on the Conti lever espresso machine groups, as well as the regular solenoid valve operated brewing groups. The filter holder body has the Conti part reference number 4056791. The portafilter has a ear orientation of 90 degree, with a thickness of the ears of 7,5mm. This...

The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...

On this product page you will find a lever piston used from 03 2006 in various Bezzera lever groups such as the Bezzera Strega, Bezzera Ellisse AL and the Bezzera Ebbis AL. This piston has been made from brass and has a outer diameter of 50mm. The Bezzera part reference for this piston is 5224201

La Pavoni Bar Lever group leverReturn to the La Pavoni Bar lever group parts overview

OR 6x1.2mm

On this product page you will find the Bakelite handle used on various locations on the Elektra Microcasa a Leva. This lever handle can be used on the lever handle and as the portafilter handle. The part reference number of this part is 00469035 This Bakelite handle needs to be screwed into a metal stud which has a M10 thread (00186035)

Pressure switch bracket made out of stainless steel 304. The bracket has a length of 90mm and a width of 18mm. This bracket is intended to fix one side to a boiler stud or inbetween a boiler bolt (up to M10).The other side is suitable to fit a pressure switch with a 1/4" BSP-G connector. 

The valve spring on this page is used in the Faema Zodiac group type, not all brewing groups use this model. This spring is there to keep pressure on the stainless steel ball bearing of 8mm. This valve spring is made from stainless steel and has a outer diameter of 8mm and a overall length of 20mm.

Valve shaft sleeve. Suitable for:CodeProducer95.05033 Carimali30370065 Expobar4151-030015 Faema4151030015 Faema03001500 Futurmat-ArieteL165/7 Marzocco313115 Pavoni10402015 SanremoRACCBUSASRBK Vibiemme

Gaggia steam water valve spring

Faema E61 expansion valve 3/8" BSP-G. This complete valve is made in the same style as the original expansion valve. The valve consists of the following components:Faema E61 Expansion Valve Nipple; Faema E61 Expansion Valve Guide; Faema E61 Expansion Valve Gasket; Faema E61 Expansion Valve SpringReturn to the Faema E61 valve parts overview

Sillicone sight glass gasket when replacing the old sight glass and gaskets on a La Cimbali espresso machine. Also suitable for La Cimbali Rubino and La Cimbali Gran Luce. Return to the La Cimbali lever parts overview

If have a wreck of a la Pavoni Europiccola lever espresso machine or you want to give your La Pavoni Mignon a complete overhaul. This set would be ideal for you. This set made for la Pavoni espresso machines with a pre-millennium brewing group. This is a generic set, so it is possible that not all parts apply to your pre-millennium espresso machine....

Connecting wire per 5m brown. made from silicone and fiberglass. copper wire.Section of wire 2,5mm2 (13AWG)

La San Marco lever group inlet pipe, this pipe draws the water from the boiler to the brewing groupReturn to the  San Marco group parts overview

OR 3.68x1.78mm