0
My cart
espresso machine brands
Rancilio steam/water valve joint o ring 12,1x2,7mm
Rancilio steam/water valve joint o ring 12,1x2,7mm
€0.87
Crushable copper washer 23x17x3mm
The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines. For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02 This copper gasket has a outer diameter of 23mm a inner diameter of 17mm and a...
€1.56
E61 group allen key copper washer 10x6,2x1mm
Almost every Faema e61 brewing group made has a Allen bolt on the front of the brewing group, yes there are models which don’t have this hole. This hole also needs to be sealed off. This can be done with PTFE tape. But you can also use a copper gasket for that. The Faema part reference for this item is 4054043102 This flat copper washer has a outer...
€0.60
La Pavoni Europiccola pressure switch
The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
€18.92
Compression spring 13x42mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This is the spring located in the upper section of the brewing group, in the trumpet/mushroom. This stainless-steel compression spring has a outer diameter of 13mm. The length of this compression spring is 42mm. This spring has been made in Italy. This...
€2.02
Faema E61 heating element 2 group 2440/2900W 220/240V
On this product page you will find a heating element which is really well suited to be installed in a Faema E61 2 group boiler. It runs on single phase and still gives enough power to power a 2 group E61. This heating element produces 2440/2900W at 220/240V the element has 4 wiring poles. In the middle of the heating element is also space for a heating...
€85.61
Faema E61 Sticker 1 Group
Faema E61 sticker 1 group for the back glass plate of the machine. Return to the Faema E61 body parts overview
€17.47
La Cimbali PTFE gasket
La Cimbali PTFE gasket. This gasket seals of the brass ptfe holder with the brewing group.Return to the La Cimbali overview page
€3.18
Bezzera heating element 4600/5400W 220/240V
Bezzera heating element 4600/5400W 220/240VBezzera code: 5722222
€95.37
Faema Steam knob insert
Faema Steam knob insert. Suitable for:CodeProducer30370130 Expobar4831131214 FaemaL165/MV Marzocco
€1.56
Bezzera contact thermostat 95°C M4 250V 16A
On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...
€39.37
Faema E61 steam/water valve gasket holder
On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...
€6.84
Faema E61 microswitch lever control bracket
If you are restoring a Faema E61 or rebuilding a Faema E61 legend it is possible that you find a broken lever mechanism bracket. Now you can replace them. If you start the brewing process on your Faema E61 group, you raise your lever control arm. This pushes down the micro control lever. This control lever is attached to a metal rod. This metal rod is...
€6.24
La Pavoni europiccola steam stem 3 holes
The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...
€14.58
Faema regulator rod
On this page you will find a regulator rod for a Faema lever brewing group. With this regulator rod you can set the amount of water flowing into the brewing group chamber. This item has been made from brass and uses a o ring to seal off the shaft of the regulator rod. This regulator rod can be used on a variety of lever brewing groups of Faema, but always...
€21.76
Bezzera Strega lever fork original
On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...
€61.77
O ring 3.69x1.78mm viton
O ring 3.69x1.78mm vitonReturn to the Faema E61 Legend water inlet parts overview
€0.52
La Carimali piston ring
The o ring on this product page is the inner piston o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 3,53mm the inner diameter is 28,17mm and the o ring has been made in Italy.
€1.68
Faema E61 lever knob
The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910 This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
€12.04
RPM pump motor 165W 230V 50/60Hz
This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This pump is a clamp ring motor. So the...
€197.30
Bezzera Strega portafilter gasket 7.5mm original
On this product page you will find the portafilter gasket for the Bezzera Strega. This portafilter gasket is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 7493020 This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 7,5mm.
€7.97
Faema E61 expansion valve gasket
Faema E61 expansion valve gasket made out of nbr. This gasket makes sure that the expansion valve doesn't leak below the opening pressure of the valve. The gasket itself is seated in a valve guide which also has the function of spring guide for the expansion valve. Return to the Faema E61 valve parts overview
€1.68
Steam and water valve complete
Steam and water valve complete. suitable forAurora BrugnettiBFC roayl;Brasilia;Faema;La ScalaSV SABVictoria Arduino
€46.08
La Pavoni Europiccola tab rod
The item on this product page is a OEM/Original La Pavoni spare part, which can also be used on various Gaggia items. This item is the steam valve shaft. With this shaft you can control the flow of steam coming out of the steam tube. This item can be used on pre-millennium as well on millennium la Pavoni espresso machines. The La Pavoni part reference for...
€16.56
La Pavoni Europiccola shaft gasket
The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....
€7.68
La Pavoni Europiccola complete group piston
La Pavoni Europiccola complete group pistonReturn to the Pavoni Europiccola group parts overview
€77.05
Gaggia lever group piston
The product on this page is a stainless steel piston for the Gaggia America and Gaggia Italia lever brewing groups. This piston has been made from 1 piece of stainless steel. The outer diameter of the piston is 50mm and the length is 82mm. The piston has the one way valve already installed. The piston also comes with a stainless steel shower screen with a...
€185.33
Arrarex Caravel replacement stickers top 1.1 - 1.3
Re-production stickers for the Arrarex Caravel temperature contol 1.1 - 1.3. The stickers are full color prints on aluminiumReturn to the Arrarex Caravel parts overview
€6.71
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.