0
My cart
espresso machine brands
Faema E61 legend non return valve
Faema E61 legend non return valveReturn to the Faema E61 Legend water inlet parts overview
€18.56
Gaggia Italcrem 1mm supplement
Gaggia Italcrem 1mm supplementReturn to the Gaggia Italcrem lever group parts overview
€1.10
Elektra Microcasa pressure gauge brass
On this product page you will find a pressure gauge which can be used on the domestic lever espresso machine the Elektra Microcasa. This is the model in brass, there is also a chrome colour available. The Elektra part reference for the brass manometer is 00398035 This manometer is a boiler pressure gauge which goes from 0 – 3 bar. The outer diameter of...
€28.16
Gaggia piston shaft
The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.
€174.30
La Pavoni piston gasket
La Pavoni piston gasketReturn to the La Pavoni lever group parts overview
€5.54
Faema E61 group spout breaker
The item shown on this page is the last item on a Faema E61 brewing group, as well on some other e61 style brewing groups. This is the drain fitting which is all the way on the bottom of the brewing group. This model of drain can be used on the brands Faema, Grimac, Pavoni and Wega espresso machines. The Faema part reference for this item is 4152135921,...
€9.31
Faema lever group spring 46mmx169mm
The compression spring on this page can be used in various Lever espresso machines. But to start: Always check the dimensions of your original spring. The product on this page has a overall length of 169mm and a outer diameter of 46mm. The compression spring is made from spring steel and has been galvanized. This compression spring can be used on a...
€17.21
Bezzera heating element 4600/5400W 220/240V
Bezzera heating element 4600/5400W 220/240VBezzera code: 5722222
€95.37
Faema E61 group valve guide 11mm
The brass square pin on this page can be used on the Faema E61 groups and on the Wega E61 style of brewing groups. The Faema part reference for this item is 4161135915 and the Wega part references are W10341 and WY27421013. This square brass pin has a overall length of 11mm. The length and width are 6x6mm. on the inside is a female M3 thread. This square...
€1.83
La Pavoni Europiccola steam tab knob
The item on this product page is a steam valve knob for various La Pavoni lever espresso machines. This item is a OEM/Original La Pavoni spare part. The La Pavoni part reference for this item is 475010 This knob has a smooth brass insert. This knob is held in place with a spring pin. This steam valve knob has a silk printed symbol of steam printed on it...
€29.93
Vibiemme Replica steam tap
With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...
€83.43
Bezzera Strega lever axle 11x61mm original
On this page for Bezzera Strega parts you can find a bearing shaft for the modern Bezzera Strega lever group. This item is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 5244006. The axle has been made out of steel and has a length of 61mm and a outer diameter of 11mm. This axle has a knurling pattern which is off centered.
€14.24
Vibiemme right lever group screw
This oddly looking screw is the right brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRDPI This screw can only be used on the right side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on...
€29.76
Faema E61 Net holder washer 9.8x6.3x1mm
On this page you will find a brass washer which is used in the E61 brewing groups made by Faema. The part references for this item can be found back in the extra info tab. The gasket is used on top of the stainless-steel nozzle filter. The nozzle spring is pushing against this washer to get a equal amount of pressure against the filter This brass washer...
€1.20
Faema E61 stickers
On this page you will find the stickers which go on the front panel of the vintage Faema E61 and Faema President lever group. These can get damaged or not present at all. This set contains the Faema water level sticker descriptions, Massimo and Minimo. For the steam valve Vapore, for the water valve Scarico acqua. For the cup warmer valve the Scaldatazze....
€10.06
Conti lever spring
The lever brewing group spring on this page can be used on the Conti lever brewing group. This compressions spring has a diameter of 52mm and a overall length of 136mm. Note springs always have a deviation.
€26.24
- Out-of-Stock
Arrarex Caravel bottomless portafilter
On this product page you will find a re-production of a original VAM/Arrarex Caravel portafilter. This item has been casted in the original shape as the original. To give it the look of the early original portafilters. In this case the bottom has been machined out the portafilter, so it is a bottomless portafilter. The handle is standard made from black...
€135.03
La Pavoni Europiccola chrome lever
The item on this page is a OEM/Original La Pavoni spare part. This item is the lever of the lever brewing group. This item is compatible with a lot of pre-millennium as well as millennium brewing groups. This lever can be used on various domestic La Pavoni and Gaggia lever espresso machines. The La Pavoni part reference for this item is 3954004 and for...
€45.08
Faema E61 camme spring 15x25mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used at the cam shaft. This spring is compressed in the cam shaft assembly. Due to this compression the cam shaft gaskets will always seal off the shaft. This stainless-steel compression spring has a outer diameter of 15mm. The length of this...
€1.52
Boiler top fitting 1/2"
If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€19.03
Lever group spring 168x46mm stainless steel
On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83
Lucifer solenoid valve 2 way base mounting 220/240V 50/60Hz
Lucifer solenoid valve 2 way base mounting 220/240V 50/60Hz
€113.28
Nuova Simonelli heating element 3/4 group 5000W 230/380V
Nuova Simonelli heating element 3/4 group 5000W 230/380V L 570mm
€166.00
Paper shim 66x58x0,8mm
On this page you will find a paper shim, these shims are used to fill up the wear of the brewing group and or the wear on the portafilter. This shim is placed above the portafilter gasket itself which makes it possible to make fine adjustments. This portafilter shim has a outer diameter of 66mm a inner diameter of 58mm and a thickness of 0,8mm This paper...
€1.10
E61 style spring holder
The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€5.14
Lever piston gasket 52x40x7mm
On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...
€5.20
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.