0
My cart
espresso machine brands
Fluidotech clamp ring pump 200L/H
On this page you will find a Fluid o Tech espresso machine pump. The model specification of this pump is Standard. This pump has a clamp ring connection, so a stainless steel clamp is used to connect it to the motor. This pump can pump 200 L/H and is equipped with a balanced bypass. The in and outlet of this pump have a 3/8” BSP-G thread. The pump has...
€114.94
Faema glass support set
It is quite common that the supports of your glass at the back are rusted and the bolts are stuck. We have made a new set of support sets for the glass plates from stainless steel. This support set can be used on all the Faema e61Faema President lever espresso machines which use the glass plate. But also on the late models Urania which use the glass...
€36.11
Rancilio PTFE sight glass classe 6/8 10X109mm
Rancilio PTFE sight glass classe 6/8 D.10X109mm
€14.75
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€2.77
Aurora Brugnetti V piston gasket 51x38x7.5mm
To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.
€5.19
Faema E61 plastic top 3 group
On this product page you will find a plexiglass for various Faema models such as the Faema E61 and the Faema President lever espresso machine. The dimensions off the cup warming plexiglass for the Faema 3 group are only the measurements of the width and length of the U shape.The length of this plexi is about 630mm and the width is 220mm. This cupwarmer...
€300.01
Faema E61 single portafilter
The portafilter on this page looks like a classical Faema E61 portafilter. And that is indeed correct, the style looks quite similar to the antique portafilters used in the Faema Lever brewing groups and Faema E61. But there are some slight differences, the shape is slightly different and the end plug in the portafilter handle is not identical to the...
€79.75
Faema E61 group lever
The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651 This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...
€14.62
Vibiemme Replica steam tap
With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...
€66.51
Elektra microcasa heating element 1 gr 800W 230V
The heating element on this product page is suitable for the Elektra Microcasa a Leva domestic lever espresso machine. This heating element has the Elektra part reference 01192035. This element produces 800W at 230V and there are 2 connecting poles. The immersed length of this element is 45mm. The diameter of the element is 50mm and the threaded...
€75.98
La Cimbali piston seal
If your m15 lever group is leaking from the showerscreen the chance is big that the piston seals needs to replaced. The La Cimbali v piston seals made out of nbr and are easy to install on the piston. Normally every piston uses 3 piston seals. They are also suited for the La Cimbali Rubino and the La Cimbali Gran Luce. Return to the La Cimbali lever parts...
€5.08
- Out-of-Stock
Arrarex Caravel Heating element 230V
On this product page you will find a reproduction of the original Vam/Arrarex Caravel heating element. This heating element is suitable for a variety of Caravel models, which use the push in elements. But not on models which use the wires to connect them to the power. This heating element has made out of stainless steel and produces approx. 550W at...
€67.04
Faema E61 heating element 2 group 2440/2900W 220/240V
On this product page you will find a heating element which is really well suited to be installed in a Faema E61 2 group boiler. It runs on single phase and still gives enough power to power a 2 group E61. This heating element produces 2440/2900W at 220/240V the element has 4 wiring poles. In the middle of the heating element is also space for a heating...
€64.84
La Pavoni Europiccola steam pipe complete
The steam tube on this product page is a OEM/Original La Pavoni product. This steam tube is used on various late model pre-millennium as well as millennium lever espresso machines. The La Pavoni part reference for this item is 3432374 This steam tube is installed with a bayonet fitting. So there are no tools required. This chrome plated steam tube does...
€89.33
3 phase safety thermostat 169-18°
3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...
€69.02
Astoria group locking gasket 88x40x2mm
On this page you will find a group locking gasket. This group locking gasket is normally used with most Astoria espresso machine and some Wega machines, so not lever groups. But they are also suitable for the Astoria and Wega lever groups This gasket is made from a fibre material. The outer diameter is 88 mm, the inner diameter is 40mm and the thickness...
€5.55
Astoria heating element 2 group 4000W 230V
Astoria heating element 2 group 4000W 230VType flangedwatt 4000volt 230
€51.43
Bezzera contact thermostat 95°C M4 250V 16A
On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...
€34.23
La Pavoni beating rubber
La Pavoni beating rubberReturn to the La Pavoni Bar modern parts overview
€10.58
La Pavoni Europiccola group shower 52mm
This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...
€7.78
Astoria lever fork pre 2001
Astoria lever group fork pre 2001 Return to the Astoria lever parts overview
€116.69
Arrarex Caravel replacement stickers top 1.1 - 1.3
Re-production stickers for the Arrarex Caravel temperature contol 1.1 - 1.3. The stickers are full color prints on aluminiumReturn to the Arrarex Caravel parts overview
€5.83
La Pavoni Europiccola heating element gasket silicone
On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
€3.51
La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€88.33
Faema E61 lever knob
The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910 This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
€9.60
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.