Home

La Pavoni pressure tabReturn to the La Pavoni Bar modern parts overview

The item on this page is a piston shaft gasket used on various espresso machines of the brand La Cimbali.  The La Cimbali part reference numbers for this item are 401247000 and 401-247-000  This piston gasket has a outer diameter of 53mm a inner diameter of 46mm and a thickness of 6mm. This piston gasket is used on various lever and hydraulic models such...

La Cimbali Liberty microcimbali boiler gasket o ring

On this product page you will find a round copper gasket, this copper gasket is of the kind which compresses when you tighten the nut above it. You will see this type of compressible copper gasket in combination on anti vacuum valves. The copper gasket on this page has a outer diameter of 18,7mm a inner diameter of 13mm and a thickness of 2,5mm. The...

Grimac G11 touchpanel 6 buttons

Bezzera sight glass D.9,9X135MM

On this page you will find a portafilter gasket suitable for various lever brewing groups. This gasket is suitable for pre-millennium groups. The La Pavoni part reference for this item is 2612005 This portafilter gasket has a outer diameter of 60mm a inner diameter of 55mm and a gasket of 5,5mm. This gasket is a square version. This gasket can be used in...

Faema steam/water valve knob. Suitable for:CodeProducer000222 Brugnetti-auroraL165/V Marzocco40500002 Nuova Simonelli

On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...

The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...

San Marco boiler gasket PTFE 165X151X3mm

Faema Mercurio and Faema Urania bottom brewing valve. Is the gasket ring broken of yours and doesn't the fitting seal properly anymore. Just replace it with a new one.

Spring for steam valve

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the top exhaust valve. When the lever is in the raised position this spring will keep the drain valve in the closed position. This stainless-steel compression spring has an outer diameter of 14mm. The length of...

This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

The boiler safety valve on this page can be used on various La Cimbali espresso machines. This valve has a male ¼” BSP-G thread. It has been calibrated at a pressure of 1,8. This valve is a adjustable model. Inside the valve is a FKM seal and a stainless-steel spring. This valve is not certified. Made in Italy You can use this valve on the Cimbali on the...

The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04  This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...

Nuova Simonelli heating element 2 gr 3000W 230/380V Type flangedwatt 3000volt 230/380vlength (mm) 340

If have a wreck of a la Pavoni Europiccola lever espresso machine or you want to give your La Pavoni Mignon a complete overhaul. This set would be ideal for you. This set made for la Pavoni espresso machines with a pre-millennium brewing group. This is a generic set, so it is possible that not all parts apply to your pre-millennium espresso machine....

La Pavoni bar gasketReturn to the La Pavoni Bar lever group parts overview

The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

On this page you will find a regulator rod for a Faema lever brewing group. With this regulator rod you can set the amount of water flowing into the brewing group chamber. This item has been made from brass and uses a o ring to seal off the shaft of the regulator rod. This regulator rod can be used on a variety of lever brewing groups of Faema, but always...

Faema Double portafilter with shiny handle

On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...

La San Marco steam/water valve spring driving bowl

La Pavoni rubber ringReturn to the La Pavoni lever group parts overview

The gasket on this product page is used on the Faema E61 brewing groups and the E61 style of brewing groups such as with Rocket, La Scala, Grimac, la Pavoni and Wega. The part reference numbers for this gasket can be found in the extra info tab. This gasket is made from AFM34 from the company Victor Reinz. This gasket has good sealing properties, even...

Gaggia Italcrem ball bearingReturn to the Gaggia Italcrem lever group parts overview

The plastic base plate shown on this page is used with various domestic La Pavoni lever espresso machines. This base plate is a OEM/Original La Pavoni spare part. The La Pavoni part reference for this item is 371174. This plastic base plate is the later model. This base plate is installed from the bottom of espresso machine and held in place with a screw....

Double nipple female 1/4"

The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...

On this page you will find a complete rebuild set for the La Cimbali Microcimbali / La Cimbali Liberty. This espresso machine is the only domestic lever espresso machine build by the company La Cimbali. Nowadays there are barely any nos or newly produced part available for this espresso machine. On this product page you can find a complete general gasket...

Silicone gasket 12.3x5.6mm. Suitable for:CodeProducer95.05031 Carimali30370060 Expobar11181302 Futurmat-ArieteL165/5 Marzocco362074 Pavoni9007703 Reneka10505558 SanremoGUARSILRUBEVO VibiemmeGUARTECIECARK Vibiemme

The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has been...