La Pavoni portafilter gasket 60x50x5,5mm
La Pavoni portafilter gasket 60x50x5,5mm. Only suitable for Millenium machines
€4.18
0
My cart
espresso machine brands
Astoria portafilter double spout
Astoria portafilter double spoutReturn to the portafilter overview
€166.35
Faema Aluminium group head
A common problem with the aluminium Faema Zodiac lever brewing group casting is that over time the back of the aluminium group can snap off. Repairing this is normally quite a difficult challenge. This casting has been used on a variety of espresso machine models made by Faema. Like the Faema President and the Faema Lambro. Seen the parts for the Zodiac...
€322.51
Gaggia Italcrem 1mm supplement
Gaggia Italcrem 1mm supplementReturn to the Gaggia Italcrem lever group parts overview
€1.10
La San Marco inlet tube nut
La San Marco brewing group water inlet nutReturn to the San Marco group parts overview
€11.74
Faema E61 sight glass 12x175mm
The sight glass on this page is used on a variety of Lever espresso machines by the brand Faema. This sight glass can be used on models such as the Faema E61, Faema President and the Faema Lambro espresso machine. The sight glass has a outer diameter of 12mm and a overall length of 175mm. This sight glass has been made in Italy. The gasket you need for...
€5.22
Vibiemme Replica steam tap
With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...
€83.43
Faema E61 Sticker 1 Group
Faema E61 sticker 1 group for the back glass plate of the machine. Return to the Faema E61 body parts overview
€17.47
Gaggia XD heating element 3 gr 5000/5950W 230V
Gaggia XD heating element 3 gr 5000/5950W 230V Type flangedwatt 5000/5950volt 220/240length (mm) 400
€86.71
Brasilia upper level fitting
The water level fitting on this page can be used on various Brasilia espresso machine models. The Brasilia part reference number for this item are 00024.0.00.04 and 00024.0.00.04 This casted brass sight glass fitting has on the machine side a male 3/8” BSP-G thread, on water level side a female 3/8” BSP-G and on the bottom/top a female ¼” BSP-G thread....
€14.66
Astoria sight glass 11x170mm
On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300. The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines. This sight glass of 11x170mm can be used on the...
€5.22
Rancilio group locking gasket 70x70x2mm
Return to the Rancilio group parts overview Rancilio group locking gasket 70x70x2mm
€6.81
La Spaziale 5LT PTFE heating element gasket 26.4x17x2mm
La Spaziale 5LT PTFE heating element gasket 26.4x17x2mm
€1.79
Lever group shower 57mm
A lever brewing group uses slightly different parts then a normal pump driven espresso machine. This is the same story for the shower screens used. This shower screen made by the Italian company IMS Filtri is a example of this. This shower screen clamps around the sleeve of the brewing group to keep it into place. The outer diameter of this shower screen...
€12.79
La San Marco steam/water valve inlet gasket 15x5.5x4mm
La San Marco steam/water valve inlet gasket 15x5.5x4mm
€1.19
La Carimali bottomless portafilter
On this page you will find a bottomless portafilter for Carimali espresso machines. Carimali, next to La San Marco uses 3 ears instead of the commonly found 2 ears. This portafilter can solely be used on Carimali brewing groups. The portafilter has 3 ear lugs instead of the traditional 2. And have a thickness of 6mm. The portafilter itself has been...
€67.38
Brasilia rubber valve stud
The valve axle on this page is suitable for a variety of Brasilia espresso machine models. This steam and water valve shaft has the Brasilia part reference of 12046.4.00.09 This steam and water valve shaft has a overall length of 100mm and comes with a sealing gasket already installed. You can use this valve not in combination with the ceramic valves....
€19.03
La Cimbali HX 150mm
La Cimbali heat exchanger (HX) has a total length of 150mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...
€32.78
La Cimbali filterbasket 1 coffee 7gr
La Cimbali stainless steel portafilter filterbasket for 1 coffee. The filterbasket can contain 7grams of coffee. The basket has a height of 22,5mm and a outside diameter of 68mm. This filterbasket can also be used for the la cimbali rubino and la cimbali gran luce espresso machines.
€5.15
La Pavoni Europiccola spring
The big spring shown on this page is a filterbasket spring. This filterbasket spring is used to keep the filterbasket in it’s place. This filter locking spring can be used on pre-millennium as well on Millennium La Pavoni portafilters. The La Pavoni part reference for this item is 311437 You can use this filter locking spring with single as well as with...
€5.76
- New
Faema Faemina heating element set 200/800 W 230 V
This heating element set is used in the boiler of the Faema Faemina lever espresso machine. It is usually replaced when the original heating element is faulty, damaged, scaled, or no longer heats the boiler water correctly. Product detailsBrand: Faema Product type: Heating element set Power: 200 W and 800 W Voltage: 230 V Set includes: 1 heating element...
€133.58
Bezzera gasket holder
On this page you will find a brass Bezzera gasket holder, which is suitable for a variety of Bezzera espresso machine models. The Bezzera part references for this item are 7496003 and 5970504. This brass gasket holder normally holds the gasket with the dimensions 19x3.5x4mm, this item does not come with this gasket. To hold this gasket in place there is a...
€14.66
Nuova Simonelli heating element 3/4 group 5000W 230/380V
Nuova Simonelli heating element 3/4 group 5000W 230/380V L 570mm
€166.00
Faema Mercurio boiler gasket
Faema Mercurio boiler gasket 8 hole made from FDA graded fiber materialReturn to the Faema Mercurio parts overview
€28.94
Brass steam pipe bushing
On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€5.04
La Pavoni Europiccola double filterbasket pre-millenium
The 2 coffee filterbasket on this page is suitable for pre-Millennium La Pavoni Lever espresso machines. The La Pavoni part reference for this item is 327051. The IMS part reference for this item is PA2T101/H24/LF This double filterbasket on this page has a outer diameter of 58mm and a height of 24,5mm. This filter basket can hold about 12 grams of ground...
€6.08
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
Bezzera bottomless portafilter
Bezzera bottomless portafilterReturn to the portafilter overview
€60.39
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.