Filter by
Price
Type part
more... less
Filter

Bezzera espresso machine parts

Explore the Range of Bezzera Espresso Machines

Welcome to our guide on Bezzera espresso machines! In this comprehensive overview, we'll take you through the various model types offered by Bezzera, including the B2000AL, Strega, Magica, and Mitica, all of which can be found on our website.

Bezzera lever group espresso machine parts

Faema E61 filterholder gasket 8.5 mm

Faema E61 filterholder gasket 8.5mm nbr. The middle size portafilter gasket available for the E61 brewing group. There are 3 thickness sizes available for the E61:8mm; 8,5mm; 9mm.If your portafilter doesn't fit as you want, there are always thinner shims available to add to the gaskets:0,5mm; 0,8mm.It's always handy to purchase some gaskets extra,...
€3.38

Bezzera ellisse spring guide

This item is a conical ptfe gasket, which is used on various Bezzera espresso machines. This item is a OEM/Original Bezzera spare part. The Bezzera part reference number for this item is 5494002.  This conical gasket is made from PTFE. The outer diameter is 16,5mm, the inner diameter is 6mm and the thickness is 5,5mm. This gasket is made in Italy. You can...
€2.71

Bezzera L1130B valve charge unit

The item on this product page is a OEM/Original Bezzera spare part. This item is a manual water inlet valve, which has the Bezzera part reference number 5964055. This valve can comes assembled and complete, so it is ready to install right away. You can use this water inlet valve on the various Bezzera lever operated espresso machines. Such as the Bezzera...
€94.94

Bezzera heating element gasket EN 76x40x2mm

The heating element gasket on this page can be used on a variety of Bezzera espresso machine heating elements. The Bezzera part reference number for this item is 5492006 This gasket has a outer diameter of 76mm a inner diameter of 40mm and a thickness of 2mm. The material used is a fibre material. The Bezzera models you can use this on are the Bezzera...
€6.77

Lever group spring 131mm

On this product page you will find the main spring for a lever brewing group. This spring is mainly used on older models of Bezzera espresso machines. This spring has a overall length of 131mm. the outer diameter of this compression spring is 46mm. The material used for this spring is just regular spring steel which has been galvanized. You can use this...
€47.99

Bezzera heating element 1850/2200W 220/240V

The heating element on this page can be used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722220, 5722236, 5722241, 5722241.01AL, 5722241AL, 5722241R and 5722416. This heating element produces 1850/2200W at 220/240V. There are in total 6 connecting poles. The flange has 4 bolt holes and has a outer diameter...
€86.25

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€3.47

Asco pressure switch P302/6

The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...
€74.07

Filterholder gasket 72.5x57x8 mm

On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
€3.67

Vibiemme drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99

Faema E61 brew valve assembly

The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab This valve assembly is used in...
€9.16

Bezzera conical ptfe seal 12x5x6mm

The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...
€6.28

Female plug 1/8"

The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...
€1.73

Bezzera lever pin

On this product page you will find a lever pin suitable for various Bezzera Lever brewing groups. This lever pin can be used on the Bezzera Ellisse Al, Bezzera Ebbis Al, Bezzera Strega, Bezzera B2000 AL and the Bezzera B2006 AL. The Bezzera part reference for this item is 5244007CN This steel lever pin has a diameter of 9mm and a length of 26mm.
€5.44

Bezzera front lever stop

On this product page you will find a front stop for various Bezzera Lever groups. This item has the Bezzera part reference of 5473002.01  You can find this rubber stop on models such as the Bezzera B2000-AL, Bezzera 2006-AL, Bezzera Ebbis AL, Bezzera Ellisse AL and the Bezzera Strega lever group
€17.44

Bezzera filterholder gasket 72x55.5x9.3mm original

the portafilter gasket on this page is a OEM/Original Bezzera spare part. The Bezzera spare part reference for this item is 7493008. This item is dimension wise and optically the same as the portafilter gasket as in the accessory tab below. But what is the difference. This gasket has a shore number of 90 and the other gasket has a shore number of 75. The...
€8.61

Bezzera nipple

The item on this product page is a OEM/Original Bezzera nipple/shaft holder. This unit is used in various espresso machine models of Bezzera. The Bezzera part reference number is 5223402.  This steam and water valve nipple/shaft holder is made from machined brass. The item is made in Italy. You can use this brass fitting on the Bezzera B2000, Bezzera...
€32.47

Flat copper gasket 28x24x1mm

The copper gasket on this product page can be used on various Bezzera espresso machines. This flat copper gasket is mainly used to seal off the steam and water valves. The Bezzera part reference for this item is 5495001. This copper gasket is flat. The outer diameter is 28mm. the inner diameter is 24mm and the thickness of this gasket is 1mm. You can use...
€1.50

Procon flange pump 100 L/H

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...
€164.53

XP110 pressure switch 0,5 - 1,5 bar 1/4"

On this product page you will find one of the most commonly used pressure switches. The Ma-Ter XP110 pressure switch. This pressure switch is rated from 0,5bar up to 1,5bar. The pre-calibrated pressure is 1 bar. The brass fitting has a male ¼” BSP-G thread on it. This switch is rated to 16A at 125/250V.
€20.04

Safety valve 3/8" 2.0 bar CE PED IV certified

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.47

Faema E61 brass camme lever rod

The item shown on this page is a cam shaft which is used on the Faema E61 and various other E61 style of brewing groups.  Such as Bezzera and La Pavoni e61 style groups. The Faema part reference for this item 3161136650, the Bezzera part reference is 7479950 and for La Pavoni the reference is 314077. This brass cam shaft has a overall length of 82mm. The...
€18.27

RPM pump motor 165W 230V 50/60Hz

This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This pump is a clamp ring motor. So the...
€197.30

Faema E61 group infusion spring 14x45mm

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the top exhaust valve. When the lever is in the raised position this spring will keep the drain valve in the closed position. This stainless-steel compression spring has an outer diameter of 14mm. The length of...
€1.62

Bezzera heating element 3300/3800W 220/240V

The heating element on this product page is used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722221, 5722246 and 5722423. This heating element produces 3300/3800W at 220/240V.there are in total 4 connecting poles on this heating element. The immersed length is 350mm and the flange has a diameter of 75mm....
€85.77

Parker 2 way solenoid valve 1/8" 1/8" 230V

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...
€104.03

Faema E61 PTFE gasket 26x21x2mm

This PTFE gasket is used in the Faema E61 brewing groups, this also includes the modern Faema E61 brewing groups. The Faema part reference for this item is 4701136003. In the antique Faema E61 espresso machines it is also used to seal off the inlet of the water inlet, on the valve guide side. This gasket has been made from PTFE. The outer diameter is 26mm...
€1.38

Faema E61 sleeve

The brass cam guide bushing shown on this page is used on the Faema E61 and E61 style brewing groups.  You can use this guide bushing on Faema, Grimac, Vibiemme, La Scala, Bezzera, Wega, Pavoni espresso machines. This brass bushing has a overall length of 28mm. The outer diameters are 10 and 15mm. The inner diameter is 8mm and the head thickness is 5mm....
€3.16

Bezzera B2000AL: The Epitome of Performance and Elegance

The Bezzera B2000AL is a true masterpiece of engineering and design. With its sleek stainless steel construction and advanced features, this machine exudes elegance while delivering unparalleled performance. Equipped with cutting-edge technology, the B2000AL ensures precise temperature control and optimal extraction, resulting in rich, flavorful espresso shots every time.

Bezzera Strega: A Modern Classic with a Timeless Twist

The Bezzera Strega pays homage to the classic lever espresso machines of yesteryear while incorporating modern innovations for today's coffee enthusiasts. Its iconic lever mechanism provides baristas with precise control over the brewing process, allowing for customizable extraction and exceptional flavor. With its striking design and unmatched performance, the Strega is sure to impress even the most discerning coffee connoisseurs.

Bezzera Magica: Where Style Meets Substance

The Bezzera Magica is the perfect blend of style and substance. Featuring a sleek, contemporary design and a host of advanced features, this machine is a true showstopper in any kitchen or cafe. With its dual boiler system and PID temperature control, the Magica ensures optimal brewing conditions for consistently delicious espresso. Whether you're a home barista or a professional, the Magica is sure to elevate your coffee experience to new heights.

Bezzera Mitica: Precision Engineering for Professional Results

The Bezzera Mitica is designed for serious coffee enthusiasts and professional baristas who demand nothing but the best. With its commercial-grade construction and precision engineering, this machine delivers exceptional performance in even the busiest coffee shops and cafes. Equipped with dual boilers, PID temperature control, and programmable volumetric dosing, the Mitica offers unparalleled control and consistency for perfect espresso every time.

Elevate Your Coffee Experience with Bezzera

In conclusion, Bezzera espresso machines are renowned for their exceptional quality, innovative features, and exquisite craftsmanship. Whether you're in search of a classic lever machine like the Strega or a high-performance model like the Mitica, Bezzera has a machine to suit your needs. Explore our selection of Bezzera espresso machines on our website today and discover the perfect addition to your coffee setup!