0
My cart
espresso machine brands
Faema E61 flange heating element side 12 holes
With machines which are around 60 years old it is not uncommon that you get corrosion in some parts. With the Flanges used on the Faema E61, Faema President and the Faema Lambro it is quite common to find pin holes. These holes leak air or water in some cases. This flange has been made for the heating element side of the Faema E61/President and Lambro...
€455.77
La San Marco lever group gasket holder
La San Marco lever group gasket holderReturn to the la San Marco parts overview
€11.19
Flat copper gasket 23x17x1.5mm
Flat copper gasket 23x17x1.5mm Return to the Faema E61 valve parts overview
€0.96
Europiccola bottomless portafilter pre-millenium
The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni pre-Millennium brewing groups. You can use this brewing group for instance on the La Pavoni Europiccola, La Pavoni Professional and the La Pavoni Mignon. With...
€80.00
Brooks Pavoni Europiccola millennium double portafilter American walnut
The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millennium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The Gaggia part reference for this item is S395307 and for La Pavoni the...
€128.08
La Pavoni Europiccola viton tap gasket
The item on this product page is a shaft gasket for the steam valve on various domestic La Pavoni and Gaggia lever espresso machines. This gasket seals off the shaft from the boiler. This shaft gasket can be used on Millennium and Pre-Millennium models. The part reference for La Pavoni is 361023 and for Gaggia it is S361023. This gasket has been made from...
€2.62
Aurora Brugnetti V piston gasket 51x38x7.5mm
To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.
€5.97
Brasilia valve washer
The item on this page is a steam and water valve washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item is 12153.0.00.03. This washer is made from machined brass. the outer diameter is 10,7mm, the inner diameter is 8,2mm and the thickness is 2mm. this washer is made in Italy. You can use this brass washer on...
€1.44
La Pavoni europiccola steam stem 3 holes
The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...
€14.58
Faema Marte mercurio shaft gasket
Are you rebuilding your Faema Marte or first series Mercurio. Then it is always handy to replace the shaft gasket.To replace this part you need to do the following things:Remove the piston from the piston rod; Remove the 2 screws on each side of the top of the group; pull the piston shaft true the top of the lever housing; now you can remove the bottom...
€23.74
Gaggia filterholder gasket 73,5x57,5x8,5mm
Gaggia filterholder gasket 73,5x57,5x8,5mmReturn to the Gaggia Italia lever group parts overview
€2.89
La Cimbali Microcimbali gasket set
On this page you will find a complete rebuild set for the La Cimbali Microcimbali / La Cimbali Liberty. This espresso machine is the only domestic lever espresso machine build by the company La Cimbali. Nowadays there are barely any nos or newly produced part available for this espresso machine. On this product page you can find a complete general gasket...
€48.05
Astoria inner lever stop
On this page you will find a OEM/Original shock absorber for the Astoria and Wega lever brewing groups. This absorber is located inside the lever fork. So when the lever is released by accident this rubber shock absorber will absorb some of the force. This absorber is also used when the lever is in rest position This shock absorber can be used on the...
€9.44
La Carimali bottomless portafilter
On this page you will find a bottomless portafilter for Carimali espresso machines. Carimali, next to La San Marco uses 3 ears instead of the commonly found 2 ears. This portafilter can solely be used on Carimali brewing groups. The portafilter has 3 ear lugs instead of the traditional 2. And have a thickness of 6mm. The portafilter itself has been...
€74.11
Brooks 50mm tamper with birch handle
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...
€61.64
La Cimbali filterholder gasket 8mm
Portafilter gasket 71x57x8mm for La Cimbali brewing group made of nbr rubber. This portafilter gasket is also compatible with the La Cimbali M15, Rubino, and Gran Luce espresso machines.
€2.89
Flex pipe 1500mm 3/8 FF conical base
The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.
€18.82
Faema E61 small square rod 6mm
On this product page you will find a key component for a Faema E61 and Wega E61 style brewing group. this square brass valve pin has the Faema part reference of 4161135916 and the Wega part reference of W10349. This small brass valve pin screws on top of a gasket holder. The square is 6x6mm. In the middle is a female M3 thread. This item has been made in...
€1.58
Washer 14x8x1mm brass
On this product page you will find a brass washer. This brass washer is used in the iconic steam and water valve used on the Faema E61 espresso machines. This washer prevents that the shaft gaskets are being destroyed with the threads on the valve shaft. The Faema part reference for this part is 4051050569 This brass flat washer has a outer diameter of...
€2.09
Faema E61 heating element 1 group 1500W 230V
The element on this product page is ideal for your antique lever espresso machine, or Faema E61 espresso machine. This heating element has the typical Faema type of brass flange. The element is powered at 230V and supplies 1500W. The immersed length of the element is just 145mm. The heating element gasket used for this element has a outer diameter of 57mm...
€102.48
E61 style group spout breaker
On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€7.01
Vibiemme PTFE boiler gasket 165x150x3mm
The gasket shown on this product page can be used on various Vibiemme espresso machine boilers. The Vibiemme part reference for this item is GUARFL205T This boiler gasket has a outer diameter of 165mm a inner diameter of 150mm and a thickness of 3mm. This gasket has been made from PTFE. Made in Italy. You can use this boiler gasket on the Vibiemme Cubo,...
€24.19
Faema piston shaft
Also with the Faema Zodiac groups it is possible that your piston shaft needs replacing, if for instance your lever pin has worn out the attachment hole and there is play on it. Keep in mind that not all piston shafts are interchangeable due to the length of these shafts. This specific shaft has a length of 183mm, this does also include the threads. The...
€103.85
Bezzera lever group piston
On this product page you will find a lever piston used from 03 2006 in various Bezzera lever groups such as the Bezzera Strega, Bezzera Ellisse AL and the Bezzera Ebbis AL. This piston has been made from brass and has a outer diameter of 50mm. The Bezzera part reference for this piston is 5224201
€95.37
Bezzera nipple
The item on this product page is a OEM/Original Bezzera nipple/shaft holder. This unit is used in various espresso machine models of Bezzera. The Bezzera part reference number is 5223402. This steam and water valve nipple/shaft holder is made from machined brass. The item is made in Italy. You can use this brass fitting on the Bezzera B2000, Bezzera...
€35.71
Valve rod washer 20x6.3x1.5mm
Valve rod washer 20x6.3x1.5. Suitable for:CodeProducer93.00058 Carimali25012521 Expobar30370100 Expobar4054043423 FaemaL165/9 MarzoccoL165/9B Marzocco00000096 Nuova Simonelli10402040 Sanremo
€0.73
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.