Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Bezzera lever pin

On this product page you will find a lever pin suitable for various Bezzera Lever brewing groups. This lever pin can be used on the Bezzera Ellisse Al, Bezzera Ebbis Al, Bezzera Strega, Bezzera B2000 AL and the Bezzera B2006 AL. The Bezzera part reference for this item is 5244007CN This steel lever pin has a diameter of 9mm and a length of 26mm.
€5.44

Asco/Sirai pressure switch P303/T01 3 phase 20A

On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...
€88.64

IMS Faema double cup filterbasket 12/18gr

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
€25.48

La Carimali piston ring

The o ring on this product page is the inner piston o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 3,53mm the inner diameter is 28,17mm and the o ring has been made in Italy.
€1.68

La Pavoni Europiccola plastic drain tray

The La Pavoni (and Gaggia) plastic drain tray (371104) is used on a variety of models like the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Romantica and finally On the Gaggia 105(S371104). The plastic drain tray hasn’t been there from the beginning. The first la Pavoni’s had a flat surface where you needed to put your coffee cup. Later on,...
€7.79

Spring for steam valve

This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return spring....
€3.80

Astoria lever group fork

On this page you will find a chrome plated lever group fork for various lever groups. This fork is responsible for transitioning the lever motion to a vertical motion. This chrome plated group fork can’t be used on the older AL lever groups as used by Astoria and Wega. That part is out of production. This specific item is OEM/Original item suitable for...
€74.25

Stainless steel pressure switch bracket

Pressure switch bracket made out of stainless steel 304. The bracket has a length of 90mm and a width of 18mm. This bracket is intended to fix one side to a boiler stud or inbetween a boiler bolt (up to M10).The other side is suitable to fit a pressure switch with a 1/4" BSP-G connector. 
€10.48

Vibiemme drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99

Lever group ball bearing

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...
€6.95

La Pavoni Europiccola pressure switch

The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
€18.92

O ring FKM 10.78x2.62mm

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€1.05

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.