0
My cart
espresso machine brands
La Pavoni heating element gasket
La Pavoni heating element gasket. 67x67 mm, int. hole dia 40mm, 3 holes
€3.02
Brasilia portafilter single spout
Brasilia portafilter single spout Return to the portafilter overview
€57.43
La Pavoni Europiccola shaft gasket
The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....
€7.68
La San Marco shower spring
La San Marco shower springReturn to the La San Marco parts overview
€6.24
Astoria back stop
On this page you will find a rubber back stop used with a variety of and newer lever espresso machine brewing groups. You will find this back stop on Astoria and Wega models pre 2001. Currently you can find them on brewing groups used by Bezzera 5473001 , Pavoni 477020, Victoria Arduino 17000018, Wega WY15101 and Brasilia 01431.0.00.02. For Pavoni groups,...
€9.59
Victoria Arduino bottomless portafilter
Victoria Arduino bottomless portafilterReturn to the portafilter overview
€60.39
Faema E61 water level spring
The spring on this page is a water level spring and is being used on a variety of older Faema espresso machines. It can be used on espresso machine models as the Faema E61, Faema President and the Faema Lambro. This stainless steel spring has a outer diameter of 22mm and a height of 20mm. Note: this item is not suitable for the Faema E61 legend and the...
€3.47
Faema P4/No stop steam valve rod
Faema steam valve rod P4/No stop. Suitable for:CodeProducer30370050 Expobar3811-117123 Faema3811117123 Faema11156502 Futurmat-Ariete11156530 Futurmat-ArieteL169 Marzocco311333 Pavoni10402061 SanremoRACCASTARUBK Vibiemme
€9.71
E61 valve guide 12mm
In the Faema E61 and E61 style brewing groups you can find a variety of square valve pins, in different shapes and heights. This square pin screws into the M3 thread situation on the valve gasket holder. This model is one of the more common model which is used with brands such as Wega, Faema and La Pavoni. The part references are for Wega WY27421012,...
€1.58
La Pavoni Europiccola seeger ring
The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...
€1.38
Conti traction fitting
This item is a Conti lever brewing group spare part. It is called a traction support. This item is made from casted brass and has 2 bushings installed into it. This item is available on request.
€62.25
- Out-of-Stock
Arrarex Caravel bottomless portafilter with basket
A set of our own bottomless portafilter and new filterbasket, you can select which type of diameter filterbasket you would like.Basket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mmWhat is the difference between a laser cut hole diameter of 0,25mm and 0,3 mm?We choose to make two hole diameters, because the flavor of the...
€140.66
Filterbasket 1 coffee 6gr 70x19.5mm
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
€5.13
La San Marco Probe level gasket 16.5x6.5x1mm
La San Marco wasserschauglass dichtung 16.5x6.5x1mm
€2.01
Brooks Pavoni Europiccola pre millennium double portafilter American walnut
The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. For La Pavoni the part reference is 395307R, this reference is only there...
€94.94
Faema E61 complete upper pipe
On this product page you will find the complete upper pipe for various E61 style and Faema E61 brewing groups. This item can be used in various E61 style brewing groups such as the ones used on the La Pavoni, Isomac and EC Heidelberg. But also on the Faema E61, Faema E61 Legend and the Faema E61 Jubilee espresso machines. The Faema part reference is...
€30.34
Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
€104.03
Faema Steam knob insert
Faema Steam knob insert. Suitable for:CodeProducer30370130 Expobar4831131214 FaemaL165/MV Marzocco
€1.56
Gaggia inlet pipe
This item is a brewing group water inlet tube which is used on various Gaggia C70/C80 brewing groups. This brewing group inlet tube is made from a copper tube which has been bend and flared at the ends. You do need to use this copper tube in combination with a nut. This item has limited availability.
€15.47
Pressure switch XP110 0.5 - 1.2 Bar 1/4g
On this product page you can find a XP110 pressure switch suitable for the Elektra Microcasa a Leva and the Isomac models Mondiale, Millennium and Tea. The part references for Elektra are01344035. This pressure switch has been manufactured by the company Ma-Ter. The maximum capacity is 15A at 125/250Vac. The maximum working temperature is 125 degree...
€26.00
Faema lever joint guide left
On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€9.60
E61 brewing group complete rebuild kit
On this product page you will find a rebuild kit for Faema E61 espresso machines. The Faema E61 brewing group is the basis off all the other E61 style of brewing groups made. This does not mean that this kit will fit all those brewing groups. Manufacturers have made over time a lot of changes in the brewing group assemblies, so they are for some...
€84.68
La Pavoni Professional pre-millenium boiler and group kit
This set is suitable for La Pavoni Professional pre millennium. 465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler gasket 1x362081 - boiler gasket 1x 361023 -...
€62.55
Lever group shower 57mm
A lever brewing group uses slightly different parts then a normal pump driven espresso machine. This is the same story for the shower screens used. This shower screen made by the Italian company IMS Filtri is a example of this. This shower screen clamps around the sleeve of the brewing group to keep it into place. The outer diameter of this shower screen...
€12.79
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.