0
My cart
espresso machine brands
La San Marco spring guide
La San Marco main compression spring guideReturn to the San Marco group parts overview
€13.24
Gaggia rubber ring
This rubber o ring is used on the Gaggia brewing groups C70/C80 and is used on the flange side of the brewing group. This o ring is made from EPDM and has a cord diameter of 1,78mm and a internal diameter of 25,12mm. This o ring is made in Italy.
€1.90
Vibiemme boiler manometer 0 - 2.5 bar
On this product page you will find a boiler pressure gauge suitable for a variety of Vibiemme espresso machines. The VBM part reference for this manometer is MANM49025GHIR. The pressure gauge can show a boiler pressure from 0 to 2,5bar. The body of the manometer is 49mm, the frame of the pressure gauge is 57mm. This manometer has a capillary with a female...
€22.75
Elektra microcasa brass washer 14,8x9,5x1mm
The brass washer on this page is a OEM/original brass washer for the Elektra Microcasa a Leva. This brass washer is used in combination with the sight glass gasket (00119035). This brass washer has the part reference of 01380035 The washer has a outer diameter of 14,8mm a inner diameter of 9,5mm and a thickness of 1mm.
€6.99
La Cimbali Microcimbali portafilter gasket 60.5x48,5x5mm
La Cimbali Microcimbali liberty portafilter gasket 60.5x48,5x5mm
€6.27
Bezzera 3/8 valve nut chrome
The nut on this product page is a valve shaft closing nut. This nut is used on various Bezzera espresso machines. This item is a OEM/Original spare part. The part reference is 5221804NC. This steam and water valve tap nut is made from machined brass, which has been nickel and chrome plated afterwards. This item is made in Italy. You can use this on the...
€11.17
Faema Mercurio/marte group FDA gasket
Faema Mercurio/marte group gasket made from FDA graded fiber material
€16.26
Gaggia filterbasket 2 coffee 14gr
The filterbasket shown on this product page is a 2 coffee filterbasket suitable solely for a variety of Gaggia espresso machines. Domestic and commercial espresso models. This filter basket has been made by the Italian company IMS Filtri. The part reference for this basket from IMS is GA2T183. Note: this is not a competition basket. This stainless-steel...
€5.63
Faema E61 FDA fiber boiler gasket 12 holes 245x205x2mm
On this product page you will find a boiler gasket for some of the Faema E61, Faema President and Faema Lambro espresso machines. This gasket goes in combination with the boilers which have a separate heating element flange and a water level flange or a single boiler with a heating element flange. We have this gasket made from AFM34 in Germany. This...
€30.34
La Cimbali HX gasket silicone 50,8x3,53mm
La Cimbali HX gasket silicone 50,8x3,53mm. the gasket is located inbetween the brewing group and the HX 150mm or the HX 210mm. And is compressed when you tighten the group bolts.Return to the La Cimbali M20 lever group overview
€3.48
Faema E61 gasket PTFE 36x30x2mm
The PTFE gasket on this page can be used on various E61 style and Faema E61 brewing groups. You can use this gasket on the E61 style brewing groups of the brands like La Scala, Grimac, Wega and La Pavoni. The part and model references can be found in the extra info tab. This PTFE gasket has a outer diameter of 36mm a inner diameter of 30mm and a...
€0.94
Aurora Brugnetti V piston gasket 51x38x7.5mm
To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.
€5.97
Victoria Arduino Supervat front lever stop
Victoria Arduino Supervat front lever stop. This stainless steel stop is a replacement for the original stop. This stop opens the brewing group valve.Back to the Victoria Arduino Supervat parts overview
€22.41
E61 brewing group gasket rebuild kit
E61 brewing group gasket rebuild kit This set is only suitable for the Faema E61 brewing group styles.
€28.80
Wega heating element 2 grp 3400W 230/380V
The heating element on this page can be used on a variety of espresso machine brands like Wega and Astoria. The Astoria part number for this item is 17059 and the Wega part number for this item WY17059 This heating element is used for 2 group espresso machines. The immersed length of the element is 320mm. It produces 3400/3700W at 230/240V and it has 6...
€146.38
Faema E61 steam tube
The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
€31.81
Plug 3/8" F
The item on this product page is a male 3/8” plug. These plugs have various applications, but mainly as it indicates, closing off something. This male plug is normally used with PTFE tape or with a flat gasket/copper gasket. This male plug has a 3/8” thread, the tread type used is a BSP-G thread. This item has been made in Italy.
€3.67
Astoria Wega heating element 1 gr 2000W 230V
Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180
€55.33
Faema Faemina heating element set 200/800 W 230 V
This heating element set is used in the boiler of the Faema Faemina lever espresso machine. It is usually replaced when the original heating element is faulty, damaged, scaled, or no longer heats the boiler water correctly. Product detailsBrand: Faema Product type: Heating element set Power: 200 W and 800 W Voltage: 230 V Set includes: 1 heating element...
€133.58
Gaggia rubber front stop
Gaggia rubber front stopReturn to the Gaggia Italcrem lever group parts overview
€2.22
Brasilia portafilter single spout
Brasilia portafilter single spout Return to the portafilter overview
€57.43
Gaggia lever group pinion gear
It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
€100.96
La Cimbali inox ball
La Cimbali brewing group stainless steel ball Return to the La Cimbali lever parts overview
€9.64
Brasilia tab gasket conical
This Conical PTFE gasket can be used on a variety of Brasilia espresso machines. For this item there is a Brasilia part reference of 00810.0.00.02. This gasket has a conical shape. The outer diameter of this PTFE gasket is 14,5mm, the inner diameter is 10mm and the thickness is 5mm. This gasket can be used on the rubber as well as on the ceramic valves....
€1.99
Rancilio PTFE sight glass classe 6/8 10X109mm
Rancilio PTFE sight glass classe 6/8 D.10X109mm
€18.50
Faema E61 filterbasket double 12gr
Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
€6.46
Cimbali steam/water valve complete with flat connection
The item on this page is a steam and water valve which is used on various Cimbali, Casadio and Faema espresso machines. There are multiple versions of this type of valve in production. The most important thing with this valve is that the connection of the boiler is flat and not conical, these valves are not interchangeable. The Cimbali part reference...
€38.24
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.