Home

The fitting on this page is the top fitting on almost every E61 brewing group. You can find the male stop on brands such as Vibiemme, La Scala, Bezzera, Grimac, Faema, La Pavoni, Wega and Brasilia espresso machines. This male cap has a diameter of 16mm. It has been made from brass and has been nickel and chrome plated. The thread used is a 3/8” BSP-G...

 Pressure switch bracket. original part

Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180

La Cimbali Liberty switch red

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Faema, Grimac, Astoria, Wega, Rancilio and Conti. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is IMS3T011. Note: this is not a competition filterbasket. This stainless steel...

The item on this product page is a stainless steel water membrane/filter. This water filter can be used with various brands such as Casadio, Faema and Cimbali espresso machines. The part reference for Casadio is 4771116081, for Cimbali 4771116081, 4771-116-081 and for Faema the part reference is 4771116081. This water filter/membrane has a outer diameter...

The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.

These machine feet are used on the Faema E61 Legend and the Faema E61 Jubilee. They can be used on the front left as the front right feet, which have both the part number 3515-135 856. These feet do come with the rubber insert 4991-136 040 These feet are made from polished aluminium. The top section has a diameter of 35mm and the bottom section has a...

To replace a cracked 12x135mm La Cimbali sight glass. If you replace the sight glass, you should also repair the top and bottom seals to avoid leaks.This sight glass is also compatible with the La Cimbali M15, Rubino, and Gran Luce.

La San Marco lever group gasket holderReturn to the la San Marco parts overview

Portafilter gasket Internal diameter (mm) 56External diameter (mm) 72Height (mm) 8,5

The element shown on this product page can be ideal to make from your 220/230V Faema E61 a 110V model. This heating element has the typical Faema type of brass flange. The element is powered at 110V and supplies 2600W. The immersed length of the element is just 350mm. The heating element gasket used for this element has a outer diameter of 57mm a inner...

Faema P4 water knob. Suitable for:CodeProducer30370120 ExpobarL165/MA Marzocco

This replacement Arrarex Caravel Portafilter handle is made from black delrin. This handle is suitable as a replacement handle for a original bakelite one, it has a m7 thread on the inside like the original portafilter.Return to the Arrarex Caravel parts overview

Grimac G11 touchpanel 6 buttons

Rocket pump manometer 0 - 20 bar

This oddly looking screw is the left brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRPIS This screw can only be used on the left side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on the...

On this product page you will find a single portafilter which is suitable for the Faema E61 Legend and the Faema E61 Jubilé espresso machines.. The part reference number for this item is 2771-135 804.The portafilter has 2 ears oriented at 90 degree. The ears have a thickness of 6,3mm. The spout connection on this portafilter is a 3/8” BSP-G thread. This...

Brass nut 1/2" BSP-G for 12mm welding capReturn the nut overview page

"Fully restored La Carimali 1 group espresso machineThe folowing things have done to the machine:Fully cleaned and descaled;new safety valvenew pressure switchpowdercoating of the framenew chrome platingd.new heat resistant wiring

The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from stainless...

On this product page you can find the pre-millennium single filterbasket for the La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. This filterbasket has a outer diameter of 58mm and a height of 22mm. This filterbasket can hold around 6 grams of ground...

Lucifer solenoid valve 2 way base mounting 220/240V 50/60Hz

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.

This a rare model fully restored first series Faema Urania 2 group lever espresso machine.The machine has been completely dismantled, after this the frame will be shotblasted and will be provided with a new dubbel layer powdercoating to prevent rusting in the future.All the chrome plated parts are dismanteled and shipped off for new chrome plating. The...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. You will see this type of fitting for instance on the water...

The portafilter on this page looks like a classical Faema E61 portafilter. And that is indeed correct, the style looks quite similar to the antique portafilters used in the Faema Lever brewing groups and Faema E61. But there are some slight differences, the shape is slightly different and the end plug in the portafilter handle is not identical to the...

On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...

On this product page you will find a round copper gasket, this copper gasket is of the kind which compresses when you tighten the nut above it. You will see this type of compressible copper gasket in combination on anti vacuum valves. The copper gasket on this page has a outer diameter of 18,7mm a inner diameter of 13mm and a thickness of 2,5mm. The...

Faema E61 brass expansion valve nipple Return to the Faema E61 valve parts overview

The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651  This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...

Valve assembly for steam valve

The heating element on this product page is used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722221, 5722246 and 5722423. This heating element produces 3300/3800W at 220/240V.there are in total 4 connecting poles on this heating element. The immersed length is 350mm and the flange has a diameter of 75mm....

La Pavoni copper gasketReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview

Originally you would only find a boiler pressure manometer on the La Pavoni Professional espresso machines. This boiler pressure manometer is mounted on the top sight glass fitting. If you want to convert your La Pavoni Europiccola and fit it with a Pressure gauge, this is the kit you need The sight glass fittings used to have a internal diameter of...

La Cimbali M15 lever stainless steel group shower screen. This screen is clamped in place by a spring.Make sure to remove the shower screen regularly to clean it. A dirty shower screen has influence on the taste of the coffee.Return to the La Cimbali lever parts overview