Home

O ring  5.7x1.9mm nbr

Faema brass cap Return to the Faema Zodiac lever parts overview

3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...

On this page you will find a regulator rod for a Faema lever brewing group. With this regulator rod you can set the amount of water flowing into the brewing group chamber. This item has been made from brass and uses a o ring to seal off the shaft of the regulator rod. This regulator rod can be used on a variety of lever brewing groups of Faema, but always...

The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...

Hardened stainless steel insert

Gaggia piston gasket

Bezzera bottomless portafilterReturn to the portafilter overview

On this page you will find a heating element suitable for various Brasilia espresso machine models. This specific heating element is suitable for a 1 group espresso machine. The Brasilia part reference is 00614.2.00.08 This heating element produces 1800W at 230V, there are 4 connecting poles. The element has a immersed length of 170mm. The flange on this...

Gaggia XD heating element 2 gr 4000/4760W 230VType flangedwatt 4000/4760volt 220/240length (mm) 310

Faema Marte sight glass axle. This axle is on some models of Faema Marte on the side of the sight glass. It is made from chrome plated brass.Return to the Faema Marte parts overview

O ring 23,52x1.78mm epdmReturn to the Faema E61 Legend water inlet parts overview

valve rod washer 22.15x13x1.2. Suitable for:CodeProducer590-715-000 Cimbali590715000 Faema

Brass reducer 3/8" F x 3/8" M BSP-G Return to our fitting overview

Copper tube 12x1mm sold per m0.8If you order multiple lengths, it is possible that you will receive multiple loose lengths

On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...

The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004.  The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...

La San Marco steam water valve nut

Rancilio heating element 1 group 3000W 230/380V

Rancilio water/steam tap

La Cimbali stainless steel portafilter filterbasket for 1 coffee. The filterbasket can contain 7grams of coffee. The basket has a height of 22,5mm and a outside diameter of 68mm. This filterbasket can also be used for the la cimbali rubino and la cimbali gran luce espresso machines.

The brewing group on this product page is a La San Marco lever brewing group style. La San Marco is famous for still making various commercial lever espresso machines such as the San Marco 85 Leva. This lever brewing group is ready to install, but does not come with the counter flange and tubing which are installed on the back of the brewing group. This...

Rancilio steam/water valve joint o ring 12,1x2,7mm

Conti Empress steam and water valve shaft gasket

La San Marco lever pistonReturn to the La San Marco Parts overview

Faema aluminium drain tray. Return to the Faema E61 valve parts overview

Injektor tube 1/4" M 110mm

Rancilio steam./water valve chromed nut

On this page you will find our tamper for the VAM Caravel and Arrarex Caravel espresso machines. This coffee tamper has a diameter of 43mm. The tamper base has been made out of stainless steel, the handle is made from wood. To be specific Italian walnut. So make sure that you don’t dip the handle in water. The most important thing is for which model of...

The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...

Level probe 1/4 80mm

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

The double bipolar switch you see on this page can be used on the La Pavoni Europiccola domestic lever espresso machine. The La Pavoni part reference for this item is 435059. This switch can be used on Pre-millennium as well as millennium models. This double bipolar switch has been rated up to 16A at 250V. On the red switch is 0 an 1 been silk printed. On...

Neuert flange pump 150 L/H compact small shaft

La San Marco steam/water valve spring

The bottomless portafilter on this page can be used on a variety of Faema espresso machines. This bottomless portafilter can be used on the antique lever espresso machines as well on the E61 brewing groups. This bottomless portafilter comes with a standard style of handle. The ear orientation is at 90 degrees. The thickness off the ears is 7,2mm. This...