Filter by
Price
€ €
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Astoria group locking gasket 88x40x2mm

On this page you will find a group locking gasket. This group locking gasket is normally used with most Astoria espresso machine and some Wega machines, so not lever groups. But they are also suitable for the Astoria and Wega lever groups This gasket is made from a fibre material. The outer diameter is 88 mm, the inner diameter is 40mm and the thickness...
€7.66

Faema zodiac valve gasket

On this page you will find the valve gasket used in the Faema Zodiac brewing group. Note not all Zodiac lever brewing groups use this gasket. This gasket has a outer diameter of 15mm a inner diameter of 5,5mm and a thickness of 4mm.
€1.20

La Pavoni europiccola steam stem 3 holes

The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...
€14.58

Elektra Microcasa pressure gauge brass

On this product page you will find a pressure gauge which can be used on the domestic lever espresso machine the Elektra Microcasa. This is the model in brass, there is also a chrome colour available. The Elektra part reference for the brass manometer is 00398035  This manometer is a boiler pressure gauge which goes from 0 – 3 bar. The outer diameter of...
€28.16

Bezzera conical ptfe seal 12x5x6mm

The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...
€6.91

Elektra microcasa boiler knob safety valve

On this page you will find the boiler filling knob of the Elektra Microcasa a Leva. This is quite a unique knob seen it has a integrated safety valve inside the knob, this product has been manufactured by the Italian company Olab. This knob/safety valve has a male 3/8” thread. The Elektra part reference for this item is 00145034
€60.82

Stainless steel clamp for motor/pump

With this motor clamp ring you are able to clamp a flange pump with a motor with a flange motor. The clamp has been made from stainless steel as well for the clamping screw which comes with it. The items have been made in Italy This item is not suitable in combination with pumps used for instance used on the Faema E61 Legend and the Faema E61 Jubile...
€5.65

Beating rubber lever group

On this page you will find a gasket type which is a beating rubber. This rubber damping rubber is located underneath the lever holder fork. But what does a beating rubber do? Well when you lower the lever and let it go, this rubber prevents that the lever fork smashes into the top casting of the lever group. You will find this beating rubber on the...
€11.74

Faema E61 plastic top 3 group

On this product page you will find a plexiglass for various Faema models such as the Faema E61 and the Faema President lever espresso machine. The dimensions off the cup warming plexiglass for the Faema 3 group are only the measurements of the width and length of the U shape.The length of this plexi is about 630mm and the width is 220mm. This cupwarmer...
€353.11

Pavoni millenium tamper 51.5mm European walnut

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€74.73

La Pavoni Europiccola level glass

The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...
€4.16

Flex pipe 2000mm 3/8 ff conical base

On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...
€20.35

Faema E61 inox filter 10.5x0.3mm

On this page you will find a small stainless steel water filter. This filter mesh goes into the top of the Faema E61 brewing groups. This filter membrane prevents clogging up of the nozzle in the group. The Faema part reference for this item is 4771135894.  This wire mesh membrane is made from stainless steel and has a outer diameter of 10,mm and a...
€1.82

Lever group spring 168x46mm stainless steel

On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83

Boiler top fitting 1/2"

If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€20.93

Pavoni pre-millenium tamper 49.5mm American walnut

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€74.73

Faema E61 group lever

The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651  This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...
€20.18

Faema E61 gasket PTFE 36x30x2mm

The PTFE gasket on this page can be used on various E61 style and Faema E61 brewing groups. You can use this gasket on the E61 style brewing groups of the brands like La Scala, Grimac, Wega and La Pavoni.  The part and model references can be found in the extra info tab. This PTFE gasket has a outer diameter of 36mm a inner diameter of 30mm and a...
€1.04

La Pavoni Europiccola 1 coffee filterbasket millenium

On this page you will find a stainless steel filterbasket. This filterbasket is suitable for the La Pavoni Post millennium brewing groups. This single filterbasket has a outer edge which is 60mm. the height of the filterbasket is 20,5mm The filterbasket itself can hold approximately 7 grams of ground coffee for a single coffee. For which models is this...
€5.60

Faema E61 legend jubilee portafilter single

On this product page you will find a single portafilter which is suitable for the Faema E61 Legend and the Faema E61 Jubilé espresso machines.. The part reference number for this item is 2771-135 804.The portafilter has 2 ears oriented at 90 degree. The ears have a thickness of 6,3mm. The spout connection on this portafilter is a 3/8” BSP-G thread. This...
€100.62

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.