Faema mercurio bottom brewing valve
Faema Mercurio and Faema Urania bottom brewing valve. Is the gasket ring broken of yours and doesn't the fitting seal properly anymore. Just replace it with a new one.
€51.93
0
My cart
espresso machine brands
Bottom fitting for boiler pipe 1/2"M 1/2"M, hole 1/4"F
If you are converting your Faema e61 with a new boiler, it can be practical to order this boiler fitting at the same time. As you can see, the new boiler does not come with this fitting. This fitting, cast and machined from brass, has a ½ ”BSP-G male thread on 2 sides. And on one side a ¼ ”BSP-G female thread. So screw it into the bottom of the HX on one...
€17.11
La San Marco non return valve inox guide
La San Marco non return valve inox guideReturn to the San Marco group parts overview
€3.01
La San Marco spring guide
La San Marco main compression spring guideReturn to the San Marco group parts overview
€13.24
Gaggia filterholder spring
Gaggia filterholder springReturn to the Gaggia Italia lever group parts overview
€1.01
Bezzera water level gasket
The item on this page is a water level gasket. This gasket can be used on various Bezzera espresso machines. The Bezzera part reference numbers for this gasket are 5224802 and 5493026. This sight glass gasket has been made from EPDM. The external diameters are 17,4 and 13mm. the internal diameter is 9mm. The height is 9 and 4mm. This gasket has been made...
€3.47
Conti portafilter single spout
The single portafilter on this product page can be used on the Conti lever brewing groups. The Conti part reference for this item is 409998 This is a single coffee filter holder. The spout is completely open, which makes it easier to clean. The ear orientation of this portafilter is 90degree. The thickness of the ears is 7,4mm. This filter holder comes...
€67.03
Boiler top fitting 1/2"
If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€19.03
La San Marco lever group lip seal
La San Marco lever group lip sealReturn to the La San Marco spare parts overview
€5.90
Astoria lever pin
On this page you will find a lever fork pin suitable for brands such as the Astoria and Wega. Note, there are more versions available This blank steel pin (so they do rust) is the link between the lever and the piston shaft. This pin has been knurled on one side, this side also grabs into the brass lever group fork. This lever pin is a OEM/Origina (part...
€20.16
Pressure switch XP110 0.5 - 1.2 Bar 1/4g
On this product page you can find a XP110 pressure switch suitable for the Elektra Microcasa a Leva and the Isomac models Mondiale, Millennium and Tea. The part references for Elektra are01344035. This pressure switch has been manufactured by the company Ma-Ter. The maximum capacity is 15A at 125/250Vac. The maximum working temperature is 125 degree...
€26.00
La Pavoni Europiccola top chrome nut
The item on this page you will find a OEM/Original La Pavoni spare part. This nut can be used on La Pavoni pre-millennium and millennium lever brewing groups. This nut is used as a counter nut for the shaft nut. The La Pavoni part reference for this item is 3135264. This nut has a internal M10 thread. The key size for this nut is 14mm. the height of this...
€7.06
Anti scorch rubber sleeve for steam wand 10mm L 50mm
When you have just used your steam wand to make a perfect latte. But you want to clean your steam wand, but you can’t because the metal is too hot. Don’t worry, we sell protective rubber sleeves which don’t pass on the heat so you won’t burn your hands. This specific model is suitable for a steam pipe which has a diameter of 10mm and has a length of 50mm....
€2.95
Faema E61 legend pump motor
Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
€260.91
Tap joint spring guide
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external diameter...
€1.20
La Cimbali Microcimbali gasket set
On this page you will find a complete rebuild set for the La Cimbali Microcimbali / La Cimbali Liberty. This espresso machine is the only domestic lever espresso machine build by the company La Cimbali. Nowadays there are barely any nos or newly produced part available for this espresso machine. On this product page you can find a complete general gasket...
€48.05
Gaggia America sight glass gasket
The item on this page is a sight glass gasket which can be used on various older Gaggia espresso machine models. The sight glass on the Gaggia America has 2 seals, a inner and a outer seal. You can use this gasket for both applications. This gasket is made from EPDM in the Czech Republic.
€8.37
La Pavoni Europiccola manometer fitting and sight glass holder gasket
The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021. This...
€1.56
Faema E61 expansion valve spring
Faema E61 stainless steel expansion valve spring. This spring has a total length of 32.5mm and a external diameter of 15mm.This spring makes sure that the valve opens at the right over pressure. Return to the Faema E61 valve parts overview
€2.20
Conti piston gasket 61mm
The piston gasket on this page is used on various Conti lever brewing groups. The Conti part reference for this item is 200510. This piston gasket has been made from NBR. The outer diameter is 61mm, the inner diameter is 47mm and the thickness is 6,3mm. This item has been made in France. You can use this piston gasket on the CC100 PM lever brewing...
€5.76
Nuova Simonelli heating element 2 gr 3000W 230/380V
Nuova Simonelli heating element 2 gr 3000W 230/380V Type flangedwatt 3000volt 230/380vlength (mm) 340
€156.19
Aurora Brugnetti X piston gasket 50x38x7.5mm
To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or X gasket. The X gasket is in almost all the cases the lower piston gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 50mm, the inner diameter is 38mm and...
€5.97
La Pavoni Piston gasket
La Pavoni Piston gasketReturn to the La Pavoni Bar modern parts overview
€12.16
La San Marco non return valve
La San Marco non return valveReturn to the La San Marco parts overview
€38.25
Astoria heating element 2 group 3700W 220V
The heating element on this page is quite a big model, which goes over 500mm. This specific heating element is made for Astoria and Wega espresso machine models with 3 brewing groups. This heating element is listed with Astoria under 17101 and with Wega the part number is WY17101 This heating element produces 3700W at 230/240V. The heating element has 4...
€105.17
Faema E61 Legend water level plastic cover
Faema E61 Legend water level plastic coverReturn to the Faema E61 Legend sight glass overview
€6.84
Faema E61 group infusion spring 14x45mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the top exhaust valve. When the lever is in the raised position this spring will keep the drain valve in the closed position. This stainless-steel compression spring has an outer diameter of 14mm. The length of...
€1.62
Bezzera Ellisse steam and water gasket holder
The item on this product page is a Bezzera Bushing. This brass bushing is a OEM/Original Bezzera spare part. The Bezzera spare part number for this item is 5224605. This part is made from machined brass. The outer diameter is 14,7mm, the height is 10,5mm and the central hole is 6,5mm. This bushing is made in Italy. This bushing can be used on the Bezzera...
€3.47
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.