0
My cart
espresso machine brands
faema PTFE gasket 15x10x2.5
On the back of the Faema Zodiac brewing group is a top nut and a bottom nut. The top nut needs to be sealed off. Otherwise the water will leak out of it. You would have the choice of a fibre gasket but also a PTFE gasket. On this page you will find the PTFE gasket. The dimensions of this PTFE gasket measure a outer dimension of 15mm a inner dimension of...
€3.28
Plug 3/8" F
The item on this product page is a male 3/8” plug. These plugs have various applications, but mainly as it indicates, closing off something. This male plug is normally used with PTFE tape or with a flat gasket/copper gasket. This male plug has a 3/8” thread, the tread type used is a BSP-G thread. This item has been made in Italy.
€3.67
Astoria heating element 4500W 230/380V
Astoria heating element 4500W 230/380V L 310mmType flangedwatt 4500volt 230/400length (mm) 310
€79.32
La Pavoni Europiccola o ring
The o ring on this product page is used on various La Pavoni and Gaggia lever espresso machines. This o ring is used to seal off the steam tube at the steam valve. This o ring can be used on later models pre-millennium and millennium steam valves. The part reference for La Pavoni is 465017. This o ring has been made from FKM. The cord diameter is 1,78mm...
€0.89
Bezzera conical ptfe seal 12x5x6mm
The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...
€6.28
Faema E61 lever knob
The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910 This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
€12.04
La Cimbali HX long 210mm dia 42mm
La Cimbali heat exchanger (HX) has a total length of 210mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...
€63.54
La Cimbali sight glass 12x135mm
To replace a cracked 12x135mm La Cimbali sight glass. If you replace the sight glass, you should also repair the top and bottom seals to avoid leaks.This sight glass is also compatible with the La Cimbali M15, Rubino, and Gran Luce.
€8.20
Rancilio heating element 3 group 6000W 230/380V
Rancilio heating element 3 group 6000W 230/380VType flangedwatt 6000volt 230/380length (mm) 380
€94.87
Elektra heating element gasket
On this product page you will find the heating element gasket of the Elektra Microcasa a Leva. This gasket is a o ring. This o ring is suitable in combination with the Elektra part numbers 02974011 and 02973011 This o ring has been made from silicone. The cord diameter of this o ring is 3,53mm and the internal diameter is 66,68mm.
€9.44
La San Marco bottomless portafilter
La San Marco bottomless portafilterReturn to the portafilter overview
€60.39
Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
€104.03
La Cimbali m15 boiler gasket
This product page is for a boiler gasket that is compatible with several vintage La Cimbali espresso machines. This boiler gasket is compatible with the La Cimbali M15 lever espresso machine, La Cimbali Rubino, and La Cimbali Gran Luce.Victor Reinz used AFM 34, a food-graded fiber gasket material, to make this one. 3 mm is the thickness, 200 mm is the...
€41.13
Pavoni Europiccola post millenium group shower 54mm
On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...
€7.67
Portafilter gasket suplement 72x58x0.8mm
The paper gasket is one of the items you rarely find as a OEM or Original Item. But it is one of the most important items to keep your machine functioning. Over time the brewing group and portafilter locking systems wears, so there will be more space then original. This small spaces can be filled with the paper shims. This can fix the problems of not...
€0.76
La Carimali return spring
The item on this product page is a OEM/Original Carimali spare part, it is the lever return spring. So it is not the main compression spring. This spring is available on request.
€38.63
La Pavoni Europiccola brass boiler fixing ring
For the La Pavoni Europiccola there haven been a variety of boiler fixing rings. It started in the 60ies with the steel boiler rings, from the 1980’s you will find the brass boiler rings. These have 3 m6 bolt holes for installing the heating element, there is also a attachment point for the ground wire. Around the turn of the century La Pavoni introduced...
€95.37
Portafilter gasket 73x57x9mm red silicone
On this product page you will find a portafilter gasket, but not a standard one. This portafilter gasket has been made from food grade silicone, in the colour red. This product has been made in Italy. The gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 9mm. You can use this on a variety of brands such as the Vibiemme...
€4.14
E61 brewing group complete rebuild kit
On this product page you will find a rebuild kit for Faema E61 espresso machines. The Faema E61 brewing group is the basis off all the other E61 style of brewing groups made. This does not mean that this kit will fit all those brewing groups. Manufacturers have made over time a lot of changes in the brewing group assemblies, so they are for some...
€84.68
Faema E61 gigleur spring
Faema E61 stainless steel gigleur spring. if your replacing this part don't forget to replace the rest of the sealing parts of the group. We offer a handy rebuilding kit for that. (the gigleur spring is also in that kit) Return to the Faema E61 group parts overview
€1.60
O ring 23,52x1.78mm epdm
O ring 23,52x1.78mm epdmReturn to the Faema E61 Legend water inlet parts overview
€1.27
Beating rubber lever group
On this page you will find a gasket type which is a beating rubber. This rubber damping rubber is located underneath the lever holder fork. But what does a beating rubber do? Well when you lower the lever and let it go, this rubber prevents that the lever fork smashes into the top casting of the lever group. You will find this beating rubber on the...
€11.74
La Pavoni Europiccola complete steam tap
The item on this product page is a OEM/Original La Pavoni spare part. This item is a complete steam valve for various domestic La Pavoni lever espresso machines. This steam valve can be used on Millennium as well on late models of the pre-millennium La Pavoni’s. This steam valve can only be used in combination with the steam tube with bayonet fitting. The...
€142.17
Fiorenzato o ring upper brewing group
A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The upper o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 58,74mm. This specific o...
€4.08
Faema lever group spring 46mmx169mm
The compression spring on this page can be used in various Lever espresso machines. But to start: Always check the dimensions of your original spring. The product on this page has a overall length of 169mm and a outer diameter of 46mm. The compression spring is made from spring steel and has been galvanized. This compression spring can be used on a...
€17.21
Faema Marte and Mercurio lever bearing
Lever ball bearing set for Faema Marte and Mercurio lever groups, only the early curved ones. For the later models Faema Mercurio you need to have a bigger bearing. click there.
€21.31
Aurora Brugnetti group locking gasket
The item on this product page is a group locking gasket for various Aurora Brugnetti brewing groups. As well as the old lever ones as well for the new solenoid valve operated groups. The Brugnetti part reference number for this item is 000460. This gasket is made from a fibre material. The outer diameter is 78mm, the inner diameter is 42mm and thickness...
€10.10
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.