0
My cart
espresso machine brands
E61 style group spout breaker
On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€5.08
Rancilio heating element 2 grp 4300W 230/380V
Rancilio heating element 2 grp 4300W 230/380V Type flangedwatt 4300volt 230/380vlength (mm) 380
€68.50
La San Marco Probe level gasket 16.5x6.5x1mm
La San Marco wasserschauglass dichtung 16.5x6.5x1mm
€1.60
Vibiemme right lever group screw
This oddly looking screw is the right brewing group pin used on the Vibiemme lever espresso machine brewing groups. The Vibiemme part reference number for this item is VITEPERNGRDPI This screw can only be used on the right side of the brewing group. This group screw is made in Italy. You can use this lever brewing group screw on the lever group used on...
€25.88
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.17
E61 style spring holder
The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€4.09
La Pavoni Europiccola top chrome nut
The item on this page you will find a OEM/Original La Pavoni spare part. This nut can be used on La Pavoni pre-millennium and millennium lever brewing groups. This nut is used as a counter nut for the shaft nut. The La Pavoni part reference for this item is 3135264. This nut has a internal M10 thread. The key size for this nut is 14mm. the height of this...
€6.14
La Pavoni Europiccola boiler gasket
This gasket is one of the few ones which does not need to seal off water. But is used as a gasket between 2 metal surfaces. This gasket can be used on various models of domestic La Pavoni lever espresso machines. The part reference for this item is 362019 This gasket has a outer diameter of 93mm a inner diameter of 80mm and a thickness of 2mm. You can use...
€4.73
Bezzera front lever stop
On this product page you will find a front stop for various Bezzera Lever groups. This item has the Bezzera part reference of 5473002.01 You can find this rubber stop on models such as the Bezzera B2000-AL, Bezzera 2006-AL, Bezzera Ebbis AL, Bezzera Ellisse AL and the Bezzera Strega lever group
€15.17
Faema E61 complete steam valve
The steam and water valve on this page can be found on various old and new Faema models. The Faema part reference for this item is 903743000 This valve has on the steam/water tube side a female thread of 3/8” BSP-G. On the inlet side the thread is a male 3/8” BSP-G. This steam/water valve does not come with a knob. You can also use the original Bakelite...
€79.30
Brooks Arrarex Caravel tamper base american walnut
As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...
€20.64
Astoria lever pin
On this page you will find a lever fork pin suitable for brands such as the Astoria and Wega. Note, there are more versions available This blank steel pin (so they do rust) is the link between the lever and the piston shaft. This pin has been knurled on one side, this side also grabs into the brass lever group fork. This lever pin is a OEM/Origina (part...
€17.53
La Pavoni Europiccola switch + pilot light
This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...
€13.36
Faema charging valve o ring 4.2x1.9mm
Faema charging valve o ring 4.2x1.9mmReturn to the Faema E61 Legend water inlet parts overview
€0.71
Bezzera lever fork
On this page you will find a OEM/Original lever group fork made by the Bezzera brand from Italy. This fork is used in various lever brewing group models with the Bezzera brand. The part reference of this item is 5284501.01NC This lever fork is the connection between the piston and lever itself. This part has been made from casted and machined brass. After...
€45.36
Brasilia steam tap screw
The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04 This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...
€16.14
La Pavoni Europiccola black boiler knob
The item on this page is a OEM/Original La Pavoni espresso machine part. This boiler knob can be used on various domestic lever espresso machines. This item has the La Pavoni part references 26872 and 47700308 This boiler knob screws in the top of the boiler. This boiler knob does not come with the sealing o ring. The knob has been made in the EU. You...
€59.28
Faema E61 group infusion spring 14x45mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the top exhaust valve. When the lever is in the raised position this spring will keep the drain valve in the closed position. This stainless-steel compression spring has an outer diameter of 14mm. The length of...
€1.29
Safety valve 3/8'' 1,8 bar
On this page you will find a safety valve which has a male 3/8”BSP-G thread. The pre-set pressure of this valve is 1,8bar. You can adjust it yourself but not recommended. The spring inside the safety valve is made from stainless steel and the sealing material is FKM. The valve has been made in Italy. We do strongly advise to replace the safety valve every...
€12.18
Faema E61 brew valve assembly
The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab This valve assembly is used in...
€7.31
Thermal protector for vibration pump
This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...
€8.34
Split pin 2x10mm
Split pin 2x10. Suitable for:CodeProducer94.00092 Carimali30370110 Expobar4061024965 Faema05160007 Futurmat-ArieteL165/8 Marzocco9007709 Reneka10806370B Sanremo
€0.77
La Pavoni group spring
La Pavoni group springReturn to the La Pavoni Bar modern parts overview
€27.69
La San Marco lever handle
La San Marco lever handle. The lever doesn't come with the handle and top screw. these can be ordered seperatelyReturn to the San Marco group parts overview
€53.71
La Pavoni Europiccola group gasket
The o ring on this page can be used as a seal between the lever brewing group and the water boiler of a variety of La Pavoni domestic lever espresso machine models. The La Pavoni part reference for this item is 465128 This o ring is not suitable for the old models, the ones which screw into the boiler. Besides that you can use this o ring on every group....
€2.85
La Pavoni Europiccola o ring
The o ring on this product page is used on various La Pavoni and Gaggia lever espresso machines. This o ring is used to seal off the steam tube at the steam valve. This o ring can be used on later models pre-millennium and millennium steam valves. The part reference for La Pavoni is 465017. This o ring has been made from FKM. The cord diameter is 1,78mm...
€0.77
E61 valve guide 12mm
In the Faema E61 and E61 style brewing groups you can find a variety of square valve pins, in different shapes and heights. This square pin screws into the M3 thread situation on the valve gasket holder. This model is one of the more common model which is used with brands such as Wega, Faema and La Pavoni. The part references are for Wega WY27421012,...
€1.26
La Cimbali steam water valve handle
La Cimbali steam water valve handle. Suitable for M28-M30-M31-M32
€52.32
La Pavoni manometer fitting
On this page you will find a pressure gauge fitting for the domestic La Pavoni lever espresso machines. The part is a original OEM part with the La Pavoni part number 3120104. I want to install a manometer on my La Pavoni Europiccola can I use this item for it? NO. This item is not suitable on a La Pavoni Europiccola espresso machine. The threads used on...
€6.78
Victoria Arduino Supervat front lever stop
Victoria Arduino Supervat front lever stop. This stainless steel stop is a replacement for the original stop. This stop opens the brewing group valve.Back to the Victoria Arduino Supervat parts overview
€19.49
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.