La Pavoni group spring
La Pavoni group springReturn to the La Pavoni Bar modern parts overview
€27.69
0
My cart
espresso machine brands
Pavoni pre-millenium tamper 49.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€60.65
Faema E61 complete steam valve
The steam and water valve on this page can be found on various old and new Faema models. The Faema part reference for this item is 903743000 This valve has on the steam/water tube side a female thread of 3/8” BSP-G. On the inlet side the thread is a male 3/8” BSP-G. This steam/water valve does not come with a knob. You can also use the original Bakelite...
€79.30
La Pavoni lever gasket
La Pavoni lever gasketReturn to the La Pavoni Bar modern parts overview
€23.21
O ring EPDM 23x3mm
O ring EPDM 23x3mm. This o ring seals off one side of the one way valve. Return to the Faema E61 valve parts overview
€5.84
Brasilia water level sealing washer
This sight glass washer can be used on Gaggia and Brasilia water level assemblies. This ring spreads the force equally over the sight glass gasket. The Brasilia part reference for this item is 00088.0.00.04 and the part reference for Gaggia is LV0506. This brass washer has a outer diameter of 15mm a inner diameter of 11,5mm and a thickness of 3mm. You...
€1.24
La Pavoni Professional pre-millenium boiler and group kit
This set is suitable for La Pavoni Professional pre millennium. 465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler gasket 1x362081 - boiler gasket 1x 361023 -...
€54.39
La Cimbali Microcimbali liberty piston shaft gasket
La Cimbali Microcimbali liberty piston shaft gasket
€1.81
Conti lever spring
The lever brewing group spring on this page can be used on the Conti lever brewing group. This compressions spring has a diameter of 52mm and a overall length of 136mm. Note springs always have a deviation.
€22.82
Lever group sleeve
On this page you will find the inner liner for a brewing group. This inner liner is used with a variety of espresso machine brands. This brass liner is pushed into place. It will be sealed off with 2 o ring, a bottom and a top o ring. To remove this liner it’s basically installation but the other way around. You can find this liner in a variety of lever...
€236.00
Lever spring Stainless steel 46x32x185mm
Lever spring Stainless steel 46x32x185mm with a cataphoresis coating
€21.88
Bezzera Strega lever fork original
On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...
€53.71
Faema E61 steam/water valve gasket holder
On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...
€5.45
Elektra microcasa flanged heating element 800w 110V
Elektra microcasa flanged heating element 800w 110VType flangewatt 800volt 110
€235.72
La Pavoni Europiccola brass washer
The item on this product page is a brass washer which can be used on various domestic La Pavoni and Gaggia Lever espresso machines. This includes pre-millennium and Millennium brewing group models. This washer is used in the steam valve. This washer spreads the force equally over the shaft gasket. There are 2 washers installed in each valve. The Gaggia...
€3.62
Lever new brewing group cover
This black plastic cover is used with a variety of lever espresso machine groups. This keeps the mechanism clean and you won’t get your fingers stuck in the bearing mechanism. This plastic cover has been manufactured in Italy. This cover can be used for various lever brewing groups such as with the Astoria, the old La Pavoni groups, Wega Antares, Wega...
€20.32
La Pavoni Europiccola level glass
The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...
€3.62
Faema E61 expansion valve 3/8
Faema E61 expansion valve 3/8" BSP-G. This complete valve is made in the same style as the original expansion valve. The valve consists of the following components:Faema E61 Expansion Valve Nipple; Faema E61 Expansion Valve Guide; Faema E61 Expansion Valve Gasket; Faema E61 Expansion Valve SpringReturn to the Faema E61 valve parts overview
€36.74
La Pavoni copper gasket
La Pavoni copper gasketReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€2.87
Faema lever group back rubber bumper
On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.
€3.60
La San Marco group lever
Return to the San Marco group parts overview La San Marco group lever
€57.89
Copper gasket 18x14x1.5mm
The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal off...
€1.78
Silicone gasket 12.3x5.6mm
Silicone gasket 12.3x5.6mm. Suitable for:CodeProducer95.05031 Carimali30370060 Expobar11181302 Futurmat-ArieteL165/5 Marzocco362074 Pavoni9007703 Reneka10505558 SanremoGUARSILRUBEVO VibiemmeGUARTECIECARK Vibiemme
€0.86
IMS E61 style shower screen
This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€21.18
Faema P4 water knob
Faema P4 water knob. Suitable for:CodeProducer30370120 ExpobarL165/MA Marzocco
€1.20
Flat copper gasket 23x17x1.5mm
Flat copper gasket 23x17x1.5mm Return to the Faema E61 valve parts overview
€0.84
Faema E61 filterbasket double 12gr
Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
€5.15
Faema valve spring 8x20mm
The valve spring on this page is used in the Faema Zodiac group type, not all brewing groups use this model. This spring is there to keep pressure on the stainless steel ball bearing of 8mm. This valve spring is made from stainless steel and has a outer diameter of 8mm and a overall length of 20mm.
€5.01
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.