0
My cart
espresso machine brands
IMS cimbali 2 cup filterbasket 12/18gr
IMS cimbali 2 coffee filterbasket. The basket can contain 12/18grams of coffee.The hole diameter of the baskets is 0,3mm.Return to the IMS filterbasket overview page
€28.82
La Pavoni Europiccola complete group piston
La Pavoni Europiccola complete group pistonReturn to the Pavoni Europiccola group parts overview
€77.05
Faema E61 group lever
The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651 This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...
€18.35
Faema E61 group discharge valve
This drain discharge valve can be found on the Faema E61 brewing groups the Wega E61 Style of brewing groups and those of Grimac. The Faema part reference for this item is 4151135920, for Wega WY27421015 and for Grimac it is 1201300035-VBM100. This brass drain jet is installed in the chrome plated drain and breaks the speed of the water coming out of the...
€6.30
Faema mercurio bottom brewing valve
Faema Mercurio and Faema Urania bottom brewing valve. Is the gasket ring broken of yours and doesn't the fitting seal properly anymore. Just replace it with a new one.
€51.93
Gaggia top nut
This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.
€8.75
Procon flange pump 100 L/H
The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...
€164.53
Lever group joint pre-2001
On this page you will find the lever fork for various lever brewing groups. One of the holes is for the bearing pin hole and the other one is for transferring the puling motion to the vertical spring motion. This specific lever fork is specifically for lever groups which are pre-2001 lever brewing groups. This item is out of production and not available...
€66.78
Brasilia tab gasket conical
This Conical PTFE gasket can be used on a variety of Brasilia espresso machines. For this item there is a Brasilia part reference of 00810.0.00.02. This gasket has a conical shape. The outer diameter of this PTFE gasket is 14,5mm, the inner diameter is 10mm and the thickness is 5mm. This gasket can be used on the rubber as well as on the ceramic valves....
€1.99
Bezzera contact thermostat 95°C M4 250V 16A
On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...
€39.37
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
Sirai pressure switch single phase P203/T01 20A
The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover. The P203T01 is a slightly lighter pressure switch. The pressure of this switch can be...
€90.16
Ode 2 way solenoid valve 1/4" 1/4" 220/230V 50/60Hz DN1,5mm
Ode 3 way solenoid valve 1/4" 1/4" 220/230V DN1,5mm.
€73.31
Faema valve spring 8x20mm
The valve spring on this page is used in the Faema Zodiac group type, not all brewing groups use this model. This spring is there to keep pressure on the stainless steel ball bearing of 8mm. This valve spring is made from stainless steel and has a outer diameter of 8mm and a overall length of 20mm.
€5.76
Elektra microcasa boiler knob safety valve
On this page you will find the boiler filling knob of the Elektra Microcasa a Leva. This is quite a unique knob seen it has a integrated safety valve inside the knob, this product has been manufactured by the Italian company Olab. This knob/safety valve has a male 3/8” thread. The Elektra part reference for this item is 00145034
€60.82
Triangular heating element gasket 80x80x2mm
Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...
€2.70
Gaggia filterholder gasket 73,5x57,5x8,5mm
Gaggia filterholder gasket 73,5x57,5x8,5mmReturn to the Gaggia Italia lever group parts overview
€2.89
Faema Aluminium group head
A common problem with the aluminium Faema Zodiac lever brewing group casting is that over time the back of the aluminium group can snap off. Repairing this is normally quite a difficult challenge. This casting has been used on a variety of espresso machine models made by Faema. Like the Faema President and the Faema Lambro. Seen the parts for the Zodiac...
€322.51
La Cimbali Microcimbali liberty piston shaft gasket
La Cimbali Microcimbali liberty piston shaft gasket
€2.08
Gaggia flat rubber gasket
This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18
Brooks 50mm tamper with european walnut handle
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are...
€59.44
O ring 25x2.4mm EPDM
The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy. You can use this o ring on the Brasilia Century,...
€1.12
Elektra microcasa flanged heating element 800w 110V
Also for customers who have a 110V version of the Elektra Microcasa a Leva there is a solution for the flanged heating element. The element on this page is the 110V with the Elektra part reference 02974011 This heating element generates 800W at 110V. There are 2 connecting terminals. The immersed depth of this element is 63mm. The flange has a outer...
€254.58
Pavoni millenium tamper 51.5mm American walnut
This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...
€67.93
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.