Rancilio group locking gasket 70x70x2mm
Return to the Rancilio group parts overview Rancilio group locking gasket 70x70x2mm
€6.81
0
My cart
espresso machine brands
La Cimbali piston o ring 34,29X5,33mm
La Cimbali piston o ring 34,29X5,33mm. This thick o ring goes on the piston of a La Cimbali M20 lever brewing groupReturn to the La Cimbali M20 lever group overview
€4.18
Stainless steel pressure switch bracket
Pressure switch bracket made out of stainless steel 304. The bracket has a length of 90mm and a width of 18mm. This bracket is intended to fix one side to a boiler stud or inbetween a boiler bolt (up to M10).The other side is suitable to fit a pressure switch with a 1/4" BSP-G connector.
€10.48
Lever group spring 168x46mm stainless steel
On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83
La Cimbali lever group springs
When your M15 lever group compression springs are rusted you can replace them cheaply with new ones. The springs are made spring steel, to prevent rusting their galvanisedInternal spring 150x30mmExternal spring 150x48mm These springs also work on the La Cimbali Rubino and the La Cimbali Gran LuceReturn to the La Cimbali lever parts overview
€24.30
Conti portafilter single spout
The single portafilter on this product page can be used on the Conti lever brewing groups. The Conti part reference for this item is 409998 This is a single coffee filter holder. The spout is completely open, which makes it easier to clean. The ear orientation of this portafilter is 90degree. The thickness of the ears is 7,4mm. This filter holder comes...
€67.03
Faema E61 plastic top 1 group
On this product page you will find a plexiglass for various Faema models such as the Faema E61 and the Faema President lever espresso machine. The dimensions off the cup warming plexiglass for the Faema 1 group are only the measurements of the width and length of the U shape. The length of this plexi is about 300mm and the width is 220mm. This plexiglass...
€241.52
La Pavoni portafilter o ring pre-millenium
For the La Pavoni pre-millennium brewing group you also need a portafilter gasket. In the case of a pre-millenium brewing group a standard o ring is used. This o ring has a internal diameter of 47mm and a cord thickness of 5,34mm so a outer diameter of 57,7mm. This portafilter gasket can be used in a variety of pre-millenium models like the La Pavoni...
€4.78
Elektra W piston gasket
This piston gasket on this product page is one of the 2 used on the Elektra Microcasa a Leva. The reference part number for this item is 00173035. This lip seal has a outer diameter of 41mm a inner diameter of 28mm and a thickness of 6mm. The shape of this one looks like a W form.
€17.95
Ulka vibration pump damper
On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...
€3.02
La San Marco lever group gasket holder
La San Marco lever group gasket holderReturn to the la San Marco parts overview
€11.19
La San Marco portafilter single spout
La San Marco portafilter single spoutReturn to the portafilter overview
€60.92
Cimbali steam/water valve complete with flat connection
The item on this page is a steam and water valve which is used on various Cimbali, Casadio and Faema espresso machines. There are multiple versions of this type of valve in production. The most important thing with this valve is that the connection of the boiler is flat and not conical, these valves are not interchangeable. The Cimbali part reference...
€38.24
Conti portafilter double spout
The portafilter on this product page is a 2 coffee portafilter which can be used on the Conti lever espresso machine groups, as well as the regular solenoid valve operated brewing groups. The filter holder body has the Conti part reference number 4056791. The portafilter has a ear orientation of 90 degree, with a thickness of the ears of 7,5mm. This...
€67.03
Level indicator red ball
This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...
€2.18
E61 group allen key copper washer 10x6,2x1mm
Almost every Faema e61 brewing group made has a Allen bolt on the front of the brewing group, yes there are models which don’t have this hole. This hole also needs to be sealed off. This can be done with PTFE tape. But you can also use a copper gasket for that. The Faema part reference for this item is 4054043102 This flat copper washer has a outer...
€0.60
La Pavoni Europiccola boiler manometer
La Pavoni Europiccola boiler manometerReturn to the Pavoni Europiccola group parts overview
€20.32
Boiler top fitting 1/2"
If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€19.03
La San Marco inlet tube nut
La San Marco brewing group water inlet nutReturn to the San Marco group parts overview
€11.74
Spring for steam valve
This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return spring....
€3.80
La Pavoni portafilter gasket
La Pavoni portafilter gasketReturn to the La Pavoni Bar modern parts overview
€11.19
La Pavoni Europiccola steam tab knob
The item on this product page is a steam valve knob for various La Pavoni lever espresso machines. This item is a OEM/Original La Pavoni spare part. The La Pavoni part reference for this item is 475010 This knob has a smooth brass insert. This knob is held in place with a spring pin. This steam valve knob has a silk printed symbol of steam printed on it...
€29.93
La Pavoni Europiccola heating element 1000W 230V
It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element. The...
€55.65
Faema E61 group spout breaker
The item shown on this page is the last item on a Faema E61 brewing group, as well on some other e61 style brewing groups. This is the drain fitting which is all the way on the bottom of the brewing group. This model of drain can be used on the brands Faema, Grimac, Pavoni and Wega espresso machines. The Faema part reference for this item is 4152135921,...
€9.31
Faema E61 water level gasket 21x11.4x5mm
The sight glass gasket on this page is used in a variety of older Faema espresso machines such as the Faema E61, Faema President and Faema Lambro. This gasket has been made from EPDM. The outer diameter of this gasket is 21mm the inner diameter is 11,5mm and the thickness is 5mm. This gasket has been made in Germany.
€1.38
Faema No stop valve fitting
Faema No stop valve fitting. pitch 1mm. Suitable for:CodeProducer30370010 Expobar4851117523 FaemaL168/0 Marzocco312226 PavoniRACC3FRUBKO VibiemmeRACCGUIASTEVO Vibiemme
€13.70
Faema E61 steam tube
The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
€31.81
Bezzera Strega lever axle 11x61mm original
On this page for Bezzera Strega parts you can find a bearing shaft for the modern Bezzera Strega lever group. This item is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 5244006. The axle has been made out of steel and has a length of 61mm and a outer diameter of 11mm. This axle has a knurling pattern which is off centered.
€14.24
La Pavoni Europiccola spring
The big spring shown on this page is a filterbasket spring. This filterbasket spring is used to keep the filterbasket in it’s place. This filter locking spring can be used on pre-millennium as well on Millennium La Pavoni portafilters. The La Pavoni part reference for this item is 311437 You can use this filter locking spring with single as well as with...
€5.76
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.