0
My cart
espresso machine brands
Faema lever joint guide left
On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€9.60
IMS cimbali 2 cup filterbasket 12/18gr
IMS cimbali 2 coffee filterbasket. The basket can contain 12/18grams of coffee.The hole diameter of the baskets is 0,3mm.Return to the IMS filterbasket overview page
€28.82
Faema E61 legend charging valve
Faema E61 legend charging valveReturn to the Faema E61 Legend water inlet parts overview
€13.71
- Out-of-Stock
Faema Mercurio third series pleixglass third series
Faema Mercurio third series pleixglass third series
€130.00
La Cimbali rubber o-ring
La Cimbali m15 rubber o-ring. When the portafilter is locked in this o-ring makes sure that the water doesn't come true the top of the brewing group ring. Return to the La Cimbali lever parts overview
€2.80
Split pin 2x10mm
Split pin 2x10. Suitable for:CodeProducer94.00092 Carimali30370110 Expobar4061024965 Faema05160007 Futurmat-ArieteL165/8 Marzocco9007709 Reneka10806370B Sanremo
€0.96
La Pavoni Europiccola switch + pilot light
This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...
€15.36
La Carimali o ring
The o ring on this product page is the group sealing o ring on the Carimali lever espresso machines. This o ring is made from EPDM. The cord diameter is 1,78mm the inner diameter is 23,52mm and the o ring has been made in Italy.
€1.76
La San Marco non return valve inox guide
La San Marco non return valve inox guideReturn to the San Marco group parts overview
€3.01
Lever group spring 168x46mm stainless steel
On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83
Pavoni millenium tamper 51.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.93
Conti lever group fork
This item is the top section of the lever mechanism used on the Conti lever brewing groups. The Conti part reference on this item is 201800 This chrome plated lever group fork is used to transfer the pulling motion of the lever to a vertical movement. That of the piston. This item has been made from chrome plated brass. This item is available on...
€43.59
La San Marco spring guide
La San Marco main compression spring guideReturn to the San Marco group parts overview
€13.24
Bezzera Ellisse steam and water gasket holder
The item on this product page is a Bezzera Bushing. This brass bushing is a OEM/Original Bezzera spare part. The Bezzera spare part number for this item is 5224605. This part is made from machined brass. The outer diameter is 14,7mm, the height is 10,5mm and the central hole is 6,5mm. This bushing is made in Italy. This bushing can be used on the Bezzera...
€3.47
La Pavoni inlet pipe
La Pavoni inlet pipeReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€21.76
Faema E61 group net holder
This brass filter holder is used on the Faema E61 brewing group. This item has the Faema part reference of 4151135895. This brass filter holder slides over the nozzle in the op of the brewing group. In the widest section is the stainless steel filter placed with a brass ring on top of it. To keep the filter holder in place there is a nozzle spring...
€2.43
Gasket Viton 12x3.5x4mm
Dichtung Viton 12x3.5x4mm Suitable for:CodeProducer400-274-010 Cimbali400274010 Cimbali
€1.18
La Pavoni Millenium IMS precision shower 54mm
On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...
€43.05
3 phase safety thermostat 169-18°
3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...
€60.70
Gaggia flat rubber gasket
This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18
Faema Urania back plate screw set
On this product page you will find a set of brass nuts and bolts used for the Faema Urania first series and Faema Urania second series. It does happen that these screws and bolts are missing, or just broken off during disassembly This kit contains in total 6 pieces, so 2 for the bottom, 2 for the top and 1 for the side. This item has been made in the EU.
€49.85
La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€101.58
Bezzera ellisse spring guide
This item is a conical ptfe gasket, which is used on various Bezzera espresso machines. This item is a OEM/Original Bezzera spare part. The Bezzera part reference number for this item is 5494002. This conical gasket is made from PTFE. The outer diameter is 16,5mm, the inner diameter is 6mm and the thickness is 5,5mm. This gasket is made in Italy. You can...
€2.71
Arrarex Caravel replacement stickers top 1.1 - 1.3
Re-production stickers for the Arrarex Caravel temperature contol 1.1 - 1.3. The stickers are full color prints on aluminiumReturn to the Arrarex Caravel parts overview
€6.71
Brasilia rubber valve stud
The valve axle on this page is suitable for a variety of Brasilia espresso machine models. This steam and water valve shaft has the Brasilia part reference of 12046.4.00.09 This steam and water valve shaft has a overall length of 100mm and comes with a sealing gasket already installed. You can use this valve not in combination with the ceramic valves....
€19.03
Conti filterholder gasket 72x57x8,5mm
Conti filterholder gasket 72x57x8,5mmReturn to the Conti lever parts overview
€4.19
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.