Faema E61 expansion valve nipple
Faema E61 brass expansion valve nipple Return to the Faema E61 valve parts overview
€7.31
0
My cart
espresso machine brands
La Cimbali Microcimbali liberty piston shaft gasket
La Cimbali Microcimbali liberty piston shaft gasket
€2.08
Brasilia upper level fitting
The water level fitting on this page can be used on various Brasilia espresso machine models. The Brasilia part reference number for this item are 00024.0.00.04 and 00024.0.00.04 This casted brass sight glass fitting has on the machine side a male 3/8” BSP-G thread, on water level side a female 3/8” BSP-G and on the bottom/top a female ¼” BSP-G thread....
€14.66
Fiorenzato group casting
Fiorenzato group casting. this casting holds the lever assembly and the spring and piston assembly, offcourse only the casting. Return to the Fiorenzato lever parts overview
€388.21
Arrarex Caravel stainless tamper European walnut
On this page you will find our tamper for the VAM Caravel and Arrarex Caravel espresso machines. This coffee tamper has a diameter of 43mm. The tamper base has been made out of stainless steel, the handle is made from wood. To be specific european walnut. So make sure that you don’t dip the handle in water. The most important thing is for which model of...
€63.99
La San Marco lever group springs (pair)
La San Marco lever group springs (pair)Return to the San Marco group parts overview
€36.17
Faema lever joint guide right
On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the right side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€6.97
La Pavoni Europiccola switch + pilot light
This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...
€15.36
Faema Zodiac gasket holder bushing
On this page you will find a brass gasket holder bushing for the Faema Zodiac brewing group. This bushing transfers the pressure from the outer flow regulator spring to the flat gasket in the back of the brewing group. This ring is made from brass and has an outer diameter of 14,60mm. The inner diameter is 10,00mm. the thickness is 3mm.
€9.78
Brooks Arrarex Caravel tamper base american walnut
As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...
€23.12
Faema E61 square shaft 34mm
On this page you will find a square brass pin. This brass pin is only used in the Faema E61 brewing group. There is no part reference number available for this part used in Faema brewing groups. This brass square shaft has a overall length of 40mm. The square itself is 5x5mm. the thread used is a male M4 thread. This square shaft goes in the bottom...
€3.06
La San Marco PTFE heating element gasket 56x46.5x3mm
La San Marco PTFE heating element gasket 56x46.5x3mm
€3.90
La San Marco non return valve
La San Marco non return valveReturn to the La San Marco parts overview
€38.25
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€3.82
Faema E61 valve gasket 15,5x7,5x4mm
This EPDM gasket is one of the most commonly used sizes of gasket. This gasket has a outer diameter of 15,5mm a inner diameter of 7,5mm and a thickness of 4mm. This gasket can be used in various applications with the old Faema Lever espresso machines. such as a gasket for sealing off valve shafts. But you will find this gasket in the Faema E61 and the...
€0.74
La Pavoni Europiccola millenium portafilter
The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R The portafilter is a...
€52.79
Faema Marte/Mercurio lower gasket
Faema Marte/Mercurio lower gasket. this is the gasket which makes the inner sleeve water tight.This sleeve can only be safely removed with a custom made key. you can try it with a punch, this can work. but the chance on damaging the part is also present.Return to the Faema parts overview
€17.66
Faema E61 heating element 2 group 2440/2900W 220/240V
On this product page you will find a heating element which is really well suited to be installed in a Faema E61 2 group boiler. It runs on single phase and still gives enough power to power a 2 group E61. This heating element produces 2440/2900W at 220/240V the element has 4 wiring poles. In the middle of the heating element is also space for a heating...
€85.61
La Pavoni Europiccola boiler gasket
This gasket is one of the few ones which does not need to seal off water. But is used as a gasket between 2 metal surfaces. This gasket can be used on various models of domestic La Pavoni lever espresso machines. The part reference for this item is 362019 This gasket has a outer diameter of 93mm a inner diameter of 80mm and a thickness of 2mm. You can use...
€5.44
Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
€104.03
Faema E61 flange level side
Faema E61 flange sight glass side. Do you have a small leak in one of your boiler flanges. this can be fixed easily by replacing the flange which is leaking. Next to the level side flange we also offer the heating element side flange. Return to the Faema E61 boiler parts overview
€367.22
Lever group spring 140mm
On this page you will find a lever brewing group main spring. This spring is used to generate the pressure. This type of spring is quite common and will find it in a variety of lever espresso machines. This model has a overall length of 140mm and a outer diameter of 46mm. this spring has been made from standard spring steel and after that it got...
€34.56
Astoria inner lever stop
On this page you will find a OEM/Original shock absorber for the Astoria and Wega lever brewing groups. This absorber is located inside the lever fork. So when the lever is released by accident this rubber shock absorber will absorb some of the force. This absorber is also used when the lever is in rest position This shock absorber can be used on the...
€9.44
Bezzera gasket holder
On this page you will find a brass Bezzera gasket holder, which is suitable for a variety of Bezzera espresso machine models. The Bezzera part references for this item are 7496003 and 5970504. This brass gasket holder normally holds the gasket with the dimensions 19x3.5x4mm, this item does not come with this gasket. To hold this gasket in place there is a...
€14.66
O ring 10.82x1.78mm
OR 10.82x1.78mm. Suitable for:CodeProducer400-393-000 Cimbali400393000 Cimbali401-204-000 Cimbali401-362-000 Cimbali401204000 Cimbali401362000 Cimbali402-209-000 Cimbali456051 Elettrobar401134887 Faema402209000 Faema4701134887 Faema07763204 Futurmat-Ariete10063013 LavazzaA-266 Marcfi-Ancas36401002 Rancilio...
€0.64
Bezzera Heating element 220/240V - 1250/1450W
On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...
€55.63
La Pavoni bearing roller
La Pavoni bearing rollerReturn to the La Pavoni Bar modern parts overview
€33.63
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.