0
My cart
espresso machine brands
Faema E61 stickers
On this page you will find the stickers which go on the front panel of the vintage Faema E61 and Faema President lever group. These can get damaged or not present at all. This set contains the Faema water level sticker descriptions, Massimo and Minimo. For the steam valve Vapore, for the water valve Scarico acqua. For the cup warmer valve the Scaldatazze....
€10.06
IMS Cimbali 1 cup filterbasket 6/9gr
IMS Cimbali filterbasket suitable for 1 cup of coffee. The basket itself can contain 6 - 9 grams of coffee.The hole diamter of the baskets is 0,3mmReturn to the IMS filterbasket overview page
€28.08
La Cimbali faema tap joint spring
La Cimbali faema tap joint spring. Suitable for:CodeProducer485-061-010 Cimbali485061010 Faema
€2.63
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€3.82
Faema lever joint guide right
On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the right side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€6.97
Gaggia Italcrem inlet tube
Gaggia Italcrem inlet tubeReturn to the Gaggia Italcrem lever group parts overview
€30.51
Brooks Arrarex Caravel tamper base american walnut
As a barista you want that your tamper has a safe spot to be stored when not in use. This tamper base is made for our Arrarex Caravel tampers. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is a rubber anti skid pad, seen wood on smooth surfaces slides easy around. This item has...
€23.12
Faema mercurio marte valve guide
Faema mercurio marte valve guide. This is a complete valve guide for the mercurio and marte espresso machines. This one has a shorter valve guide then the E61 model.Return to the Faema parts overview
€32.75
Female plug 1/8"
The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...
€1.73
Ulka vibration pump damper
On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...
€3.02
Elektra microcasa flanged heating element 800w 110V
Also for customers who have a 110V version of the Elektra Microcasa a Leva there is a solution for the flanged heating element. The element on this page is the 110V with the Elektra part reference 02974011 This heating element generates 800W at 110V. There are 2 connecting terminals. The immersed depth of this element is 63mm. The flange has a outer...
€254.58
Faema E61 left lower group tube
On this page you will find the bottom tube which can be used on various Faema E61 espresso machine models. Note: this item is for the left group when you are standing at the back. The fitting on the boiler side is a female ½”BSP-G thread. On the other side of the tube at the brewing group there is a male fitting which is ½”BSP-G
€59.72
La San Marco heating element 3 gr 3500W 230/380V
La San Marco heating element 3 gr 3500W 230/380V L 380mm
€129.18
Faema E61 legend pump motor
Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
€260.91
Faema E61 brass washer
Faema E61 brass washer 5.4x3mm is fitted between the gasket valve holder and between the valve guides Return to the Faema E61 group parts overview
€0.34
La San Marco O ring 74.6x5.9mm
La San Marco o ring 74.6x5.9mmReturn to the San Marco group parts overview
€4.96
Pressure switch XP110 0.5 - 1.2 Bar 1/4g
On this product page you can find a XP110 pressure switch suitable for the Elektra Microcasa a Leva and the Isomac models Mondiale, Millennium and Tea. The part references for Elektra are01344035. This pressure switch has been manufactured by the company Ma-Ter. The maximum capacity is 15A at 125/250Vac. The maximum working temperature is 125 degree...
€26.00
XP110 pressure switch 0,5 - 1,5 bar 1/4"
On this product page you will find one of the most commonly used pressure switches. The Ma-Ter XP110 pressure switch. This pressure switch is rated from 0,5bar up to 1,5bar. The pre-calibrated pressure is 1 bar. The brass fitting has a male ¼” BSP-G thread on it. This switch is rated to 16A at 125/250V.
€20.04
Elektra portafilter chrome
The portafilter on this page is for the Elektra Microcasa a Leva. The Elektra part reference for this item is 00187021. The portafilter is made from brass and has been chrome plated, so it will match your chrome plated Elektra Microcasa. The handle on this portafilter is made from bakelite. The ears of the portafilter have a thickness of 5,5mm. This...
€150.02
Boiler top fitting 1/2"
If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€19.03
Astoria Wega heating element 1 gr 2000W 230V
Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180
€55.33
Gaggia top nut
This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.
€8.75
Faema Urania 9 hole aluminium boiler flange ring
Faema Urania 9 hole aluminium boiler flange ring. This flange ring is not suited for the E61 style boiler flange ring.Return to the Urania boiler parts overview
€93.45
Conti piston gasket 61mm
The piston gasket on this page is used on various Conti lever brewing groups. The Conti part reference for this item is 200510. This piston gasket has been made from NBR. The outer diameter is 61mm, the inner diameter is 47mm and the thickness is 6,3mm. This item has been made in France. You can use this piston gasket on the CC100 PM lever brewing...
€5.76
La San Marco bottomless portafilter
La San Marco bottomless portafilterReturn to the portafilter overview
€60.39
La San Marco teflon gasket
La San Marco teflon gasketReturn to the San Marco group parts overview
€10.24
Brasilia portafilter single spout
Brasilia portafilter single spout Return to the portafilter overview
€57.43
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.