0
My cart
espresso machine brands
La Cimbali filterholder gasket 8mm
Portafilter gasket 71x57x8mm for La Cimbali brewing group made of nbr rubber. This portafilter gasket is also compatible with the La Cimbali M15, Rubino, and Gran Luce espresso machines.
€2.89
Faema valve spring 8x20mm
The valve spring on this page is used in the Faema Zodiac group type, not all brewing groups use this model. This spring is there to keep pressure on the stainless steel ball bearing of 8mm. This valve spring is made from stainless steel and has a outer diameter of 8mm and a overall length of 20mm.
€5.76
Safety valve 3/8" 2.0 bar CE PED IV certified
On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.47
IMS E61 style shower screen
This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€22.75
La Spaziale 5LT PTFE heating element gasket 26.4x17x2mm
La Spaziale 5LT PTFE heating element gasket 26.4x17x2mm
€1.79
La Carimali return spring
The item on this product page is a OEM/Original Carimali spare part, it is the lever return spring. So it is not the main compression spring. This spring is available on request.
€38.63
La San Marco portafilter single spout
La San Marco portafilter single spoutReturn to the portafilter overview
€60.92
La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€101.58
Water level nut
This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427. This sight glass fitting has a male 3/8” BSP-G thread. The central hole is for the sight...
€6.42
E61 style spring holder
The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€5.14
La Cimbali HX long 210mm dia 42mm
La Cimbali heat exchanger (HX) has a total length of 210mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...
€63.54
La Carimali piston O Ring
The o rings used on this product page are the La Carimali piston o rings. Every piston uses in total 3 o rings to seal off the group. This o ring is made from EPDM. The cord diameter is 5,3mm and the inner diameter of the ring is 40,64mm. This item is made in Italy.
€3.18
La Pavoni Europiccola tab rod
The item on this product page is a OEM/Original La Pavoni spare part, which can also be used on various Gaggia items. This item is the steam valve shaft. With this shaft you can control the flow of steam coming out of the steam tube. This item can be used on pre-millennium as well on millennium la Pavoni espresso machines. The La Pavoni part reference for...
€16.56
Expansion valve 1/4M adjustable 10-14 Bar
The item on this page is a espresso machine expansion valve. This valve can be used on various espresso machine brands such as La Scala, La Spaziale, La San Marco, Faema and Brasilia. This expansion valve has a male thread which is ¼” BSP-G. This valve is adjustable. The pressure range goes from 10 to 14 bar. For the exhaust water there is a connection...
€25.48
Elektra Microcasa bakelite portafilter handle M10
On this product page you will find the Bakelite handle used on various locations on the Elektra Microcasa a Leva. This lever handle can be used on the lever handle and as the portafilter handle. The part reference number of this part is 00469035 This Bakelite handle needs to be screwed into a metal stud which has a M10 thread (00186035)
€14.98
La Cimbali Microcimbali portafilter gasket 60.5x48,5x5mm
La Cimbali Microcimbali liberty portafilter gasket 60.5x48,5x5mm
€6.27
Faema E61 legend sight glass
Faema E61 legend sight glasReturn to the Faema E61 Legend sight glass overview
€9.77
Bezzera Heating element 220/240V - 1250/1450W
On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...
€55.63
Faema lever group back rubber bumper
On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.
€4.14
Faema non return valve plastic holder
Faema non return valve plastic holderReturn to the Faema E61 Legend water inlet parts overview
€3.30
Faema regulator rod
On this page you will find a regulator rod for a Faema lever brewing group. With this regulator rod you can set the amount of water flowing into the brewing group chamber. This item has been made from brass and uses a o ring to seal off the shaft of the regulator rod. This regulator rod can be used on a variety of lever brewing groups of Faema, but always...
€21.76
Female plug 1/8"
The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...
€1.73
Sirai pressure switch single phase P203/T01 20A
The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover. The P203T01 is a slightly lighter pressure switch. The pressure of this switch can be...
€90.16
Faema E61 small non return valve
Faema E61 brass small non return valve. This valve guide is sealed by this o ring and kept on it's place with the non return valve spring. Return to the Faema E61 valve parts overview
€8.71
Pavoni millenium tamper 51.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.93
Anti vacuum valve V.A.R. 1/4"
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€10.91
La Pavoni Europiccola seeger ring
The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...
€1.38
La Pavoni Europiccola brass nut
The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...
€5.38
Victoria Arduino bottomless portafilter
Victoria Arduino bottomless portafilterReturn to the portafilter overview
€60.39
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.