0
My cart
espresso machine brands
Gaggia Italcrem inlet tube
Gaggia Italcrem inlet tubeReturn to the Gaggia Italcrem lever group parts overview
€30.51
Elektra portafilter chrome
The portafilter on this page is for the Elektra Microcasa a Leva. The Elektra part reference for this item is 00187021. The portafilter is made from brass and has been chrome plated, so it will match your chrome plated Elektra Microcasa. The handle on this portafilter is made from bakelite. The ears of the portafilter have a thickness of 5,5mm. This...
€150.02
Faema E61 valve rod spring
This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
€1.13
Nuova Simonelli heating element 3/4 group 5000W 230/380V
Nuova Simonelli heating element 3/4 group 5000W 230/380V L 570mm
€166.00
Bezzera bottomless portafilter
Bezzera bottomless portafilterReturn to the portafilter overview
€60.39
Vibiemme drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Faema E61 steam tube
The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
€31.81
Faema Marte sight glass axle
Faema Marte sight glass axle. This axle is on some models of Faema Marte on the side of the sight glass. It is made from chrome plated brass.Return to the Faema Marte parts overview
€165.82
Faema E61 inox filter 10.5x0.3mm
On this page you will find a small stainless steel water filter. This filter mesh goes into the top of the Faema E61 brewing groups. This filter membrane prevents clogging up of the nozzle in the group. The Faema part reference for this item is 4771135894. This wire mesh membrane is made from stainless steel and has a outer diameter of 10,mm and a...
€1.66
La Pavoni Europiccola lever roller
This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...
€6.38
Conti lever chromed holder
Conti lever chromed holderReturn to the Conti lever parts overview
€22.41
Faema E61 group net holder
This brass filter holder is used on the Faema E61 brewing group. This item has the Faema part reference of 4151135895. This brass filter holder slides over the nozzle in the op of the brewing group. In the widest section is the stainless steel filter placed with a brass ring on top of it. To keep the filter holder in place there is a nozzle spring...
€2.43
Faema Mercurio stainless steel heating element set
Faema Mercurio stainless steel heating element set. special order item 2 - 3 weeks
€292.62
La San Marco bottomless portafilter
La San Marco bottomless portafilterReturn to the portafilter overview
€60.39
La San Marco lower lever body
La San Marco lower lever body. partially shiny. Return to the San Marco group parts overview
€481.29
La Pavoni Millenium IMS precision shower 54mm
On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...
€43.05
Faema E61 water inlet valve guide
Faema E61 brass water inlet valve guide. You can use this valve guide for several faema models. But they are mostly used on the Faema E61. comes with the gasket Return to the Faema E61 water inlet overview
€35.73
Faema o ring 7,2X1,9mm nbr
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
€0.56
La Pavoni Europiccola brass boiler fixing ring
For the La Pavoni Europiccola there haven been a variety of boiler fixing rings. It started in the 60ies with the steel boiler rings, from the 1980’s you will find the brass boiler rings. These have 3 m6 bolt holes for installing the heating element, there is also a attachment point for the ground wire. Around the turn of the century La Pavoni introduced...
€95.37
La San Marco washer 30X22X1,5mm
La San Marco washer 30X22X1,5mmReturn to the San Marco group parts overview
€2.00
Faema E61 stainless steel valve rod
On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...
€13.15
La Pavoni lever pin
La Pavoni lever pinReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€21.76
La San Marco non return valve
La San Marco non return valveReturn to the La San Marco parts overview
€38.25
La San Marco group supply spring
La San Marco group supply springReturn to the San Marco group parts overview
€5.45
Faema E61 filterbasket double 12gr
Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
€6.46
Gaggia lever group pinion gear
It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
€100.96
IMS La San Marco 1 cup filterbasket 6/9gr
IMS La San Marco 1 coffee filterbasket. This filterbasket can contain 6/9grams of coffee.The hole size of the filterbasket is 0,3mm Return to the IMS filterbasket overview page
€28.63
Gaggia top nut
This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.
€8.75
Faema E61 group valve guide 11mm
The brass square pin on this page can be used on the Faema E61 groups and on the Wega E61 style of brewing groups. The Faema part reference for this item is 4161135915 and the Wega part references are W10341 and WY27421013. This square brass pin has a overall length of 11mm. The length and width are 6x6mm. on the inside is a female M3 thread. This square...
€1.83
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.