La San Marco group supply spring
La San Marco group supply springReturn to the San Marco group parts overview
€5.45
0
My cart
espresso machine brands
Gaggia piston shaft
The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.
€174.30
Faema E61 group discharge valve
This drain discharge valve can be found on the Faema E61 brewing groups the Wega E61 Style of brewing groups and those of Grimac. The Faema part reference for this item is 4151135920, for Wega WY27421015 and for Grimac it is 1201300035-VBM100. This brass drain jet is installed in the chrome plated drain and breaks the speed of the water coming out of the...
€6.30
Faema lever joint guide left
On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€9.60
Compression spring 13x42mm
The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This is the spring located in the upper section of the brewing group, in the trumpet/mushroom. This stainless-steel compression spring has a outer diameter of 13mm. The length of this compression spring is 42mm. This spring has been made in Italy. This...
€2.02
Faema E61 PTFE gasket 26x21x2mm
This PTFE gasket is used in the Faema E61 brewing groups, this also includes the modern Faema E61 brewing groups. The Faema part reference for this item is 4701136003. In the antique Faema E61 espresso machines it is also used to seal off the inlet of the water inlet, on the valve guide side. This gasket has been made from PTFE. The outer diameter is 26mm...
€1.38
La Pavoni group spring
La Pavoni group springReturn to the La Pavoni Bar modern parts overview
€31.84
Faema E61 legend sight glass
Faema E61 legend sight glasReturn to the Faema E61 Legend sight glass overview
€9.77
La Pavoni Europiccola tab rod
The item on this product page is a OEM/Original La Pavoni spare part, which can also be used on various Gaggia items. This item is the steam valve shaft. With this shaft you can control the flow of steam coming out of the steam tube. This item can be used on pre-millennium as well on millennium la Pavoni espresso machines. The La Pavoni part reference for...
€16.56
La Pavoni portafilter gasket 60x50x5,5mm
La Pavoni portafilter gasket 60x50x5,5mm. Only suitable for Millenium machines
€4.18
La San Marco heating element 3 gr 3500W 230/380V
La San Marco heating element 3 gr 3500W 230/380V L 380mm
€129.18
Lever group fibre gasket 22x17x2mm
On this product page you will find a fibre gasket used on the Faema Zodiac lever brewing group. This gasket seals off the flow regulator on multiple locations. This fibre gasket has a outer diameter of 22mm a inner diameter of 17mm and a thickness of 2 mm. this item has been made in Italy. You can use this gasket on the flow regulators used on the later...
€2.54
Tap joint spring 12x15mm
The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from stainless...
€2.41
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
Faema E61 valve rod washer stainless
This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101 This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...
€0.74
Bezzera lever group piston
On this product page you will find a lever piston used from 03 2006 in various Bezzera lever groups such as the Bezzera Strega, Bezzera Ellisse AL and the Bezzera Ebbis AL. This piston has been made from brass and has a outer diameter of 50mm. The Bezzera part reference for this piston is 5224201
€95.37
Vibiemme drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Autofill system lever espresso machine
This autolevel set contains the folowing parts:autofill device 230V; solenoid valve 1/8" 230V; level probe 140 mm; solenoid valve plastic cover; wiring harness; ball valve 1/8"
€120.55
La San Marco lever group right screw
La San Marco lever group right screwReturn to the San Marco group parts overview
€15.47
Sight glass gasket 16x10x8mm
The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has been...
€1.47
La San Marco steam/water valve inlet gasket 15x5.5x4mm
La San Marco steam/water valve inlet gasket 15x5.5x4mm
€1.19
E61 brewing group complete rebuild kit
On this product page you will find a rebuild kit for Faema E61 espresso machines. The Faema E61 brewing group is the basis off all the other E61 style of brewing groups made. This does not mean that this kit will fit all those brewing groups. Manufacturers have made over time a lot of changes in the brewing group assemblies, so they are for some...
€84.68
Arrarex Caravel double filterbasket set
A set of 2 our own custom made laser cut double filter baskets for the arrarex caravelBasket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mmWhat is the difference between a laser cut hole diameter of 0,25mm and 0,3 mm?We choose to make two hole diameters, because the flavor of the espresso completely changes. But using the...
€62.32
La Pavoni beating rubber
La Pavoni beating rubberReturn to the La Pavoni Bar modern parts overview
€12.16
Gaggia inlet pipe
This item is a brewing group water inlet tube which is used on various Gaggia C70/C80 brewing groups. This brewing group inlet tube is made from a copper tube which has been bend and flared at the ends. You do need to use this copper tube in combination with a nut. This item has limited availability.
€15.47
La Cimbali HX ring
La Cimbali heat exchanger (HX) ring. This ring spreads equal amount of pressure to the HX and the seal inbetween the HX and the brewing groupreturn to the La Cimbali M20 overview page
€39.45
Faema lever group front stop
Faema lever group front stop. This stop makes sure that the lever assembly doesn't touch the brewing group when the lever is lowered. Over time the rubber used perishes or get’s damages. You can use this part on the Faema Zodiac lever group, Faema President, Faema Urania, Faema Lambro lever brewing groups. They are also usable for the Faema Marte and...
€4.93
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.