Faema E61 legend charging valve
Faema E61 legend charging valveReturn to the Faema E61 Legend water inlet parts overview
€13.71
0
My cart
espresso machine brands
Faema spring 14x23mm
The spring on this page is one used in the flow regulation mechanism of the Faema Zodiac brewing group. The spring has been made out of stainless steel and has an outer diameter of 14mm and a overall length of 23mm. This item can be used in a variety of lever brewing groups made by Faema, but if you are not sure always send us a message to verify this.
€4.97
Bezzera Strega lever axle 11x61mm original
On this page for Bezzera Strega parts you can find a bearing shaft for the modern Bezzera Strega lever group. This item is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 5244006. The axle has been made out of steel and has a length of 61mm and a outer diameter of 11mm. This axle has a knurling pattern which is off centered.
€14.24
Bezzera Strega lever fork original
On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...
€61.77
La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€101.58
Faema E61 expansion valve guide
Faema E61 expansion valve guide. This guide makes sure that the expansion valve gasket stays in it's place Return to the Faema E61 valve parts overview
€4.64
Faema lever group spring 46mmx169mm
The compression spring on this page can be used in various Lever espresso machines. But to start: Always check the dimensions of your original spring. The product on this page has a overall length of 169mm and a outer diameter of 46mm. The compression spring is made from spring steel and has been galvanized. This compression spring can be used on a...
€17.21
Safety valve 3/8" 2.0 bar CE PED IV certified
On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.47
Faema E61 brass washer
Faema E61 brass washer 5.4x3mm is fitted between the gasket valve holder and between the valve guides Return to the Faema E61 group parts overview
€0.34
La Pavoni Europiccola o ring
The o ring on this product page is used on various La Pavoni and Gaggia lever espresso machines. This o ring is used to seal off the steam tube at the steam valve. This o ring can be used on later models pre-millennium and millennium steam valves. The part reference for La Pavoni is 465017. This o ring has been made from FKM. The cord diameter is 1,78mm...
€0.89
Valve shaft sleeve
Valve shaft sleeve. Suitable for:CodeProducer95.05033 Carimali30370065 Expobar4151-030015 Faema4151030015 Faema03001500 Futurmat-ArieteL165/7 Marzocco313115 Pavoni10402015 SanremoRACCBUSASRBK Vibiemme
€1.26
Faema bottomless portafilter
The bottomless portafilter on this page can be used on a variety of Faema espresso machines. This bottomless portafilter can be used on the antique lever espresso machines as well on the E61 brewing groups. This bottomless portafilter comes with a standard style of handle. The ear orientation is at 90 degrees. The thickness off the ears is 7,2mm. This...
€60.39
La Pavoni lever pin
La Pavoni lever pinReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€21.76
Faema E61 valve gasket 13x4x4mm
The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
€0.74
Gaggia inlet pipe
This item is a brewing group water inlet tube which is used on various Gaggia C70/C80 brewing groups. This brewing group inlet tube is made from a copper tube which has been bend and flared at the ends. You do need to use this copper tube in combination with a nut. This item has limited availability.
€15.47
Gaggia America sight glass gasket
The item on this page is a sight glass gasket which can be used on various older Gaggia espresso machine models. The sight glass on the Gaggia America has 2 seals, a inner and a outer seal. You can use this gasket for both applications. This gasket is made from EPDM in the Czech Republic.
€8.37
Fiorenzato group casting
Fiorenzato group casting. this casting holds the lever assembly and the spring and piston assembly, offcourse only the casting. Return to the Fiorenzato lever parts overview
€388.21
Gaggia Italcrem lever
Gaggia Italcrem lever. Return to the Gaggia Italcrem lever group parts overview
€155.28
Faema E61 PTFE gasket 26x21x2mm
This PTFE gasket is used in the Faema E61 brewing groups, this also includes the modern Faema E61 brewing groups. The Faema part reference for this item is 4701136003. In the antique Faema E61 espresso machines it is also used to seal off the inlet of the water inlet, on the valve guide side. This gasket has been made from PTFE. The outer diameter is 26mm...
€1.38
Faema Steam knob insert
Faema Steam knob insert. Suitable for:CodeProducer30370130 Expobar4831131214 FaemaL165/MV Marzocco
€1.56
Bezzera group elbow fitting
Bezzera group elbow fitting Return to the Bezzera lever parts overview
€33.43
Faema E61 group upper plug
The fitting on this page is the top fitting on almost every E61 brewing group. You can find the male stop on brands such as Vibiemme, La Scala, Bezzera, Grimac, Faema, La Pavoni, Wega and Brasilia espresso machines. This male cap has a diameter of 16mm. It has been made from brass and has been nickel and chrome plated. The thread used is a 3/8” BSP-G...
€5.14
PTFE gasket 20x17x2mm
PTFE gasket 20x17x2mm. Suitable for:CodeProducer12010 Astoria CMA000466 Aurora-brugnetti000501 Aurora-brugnetti400-215-000 Cimbali400215000 Cimbali401-183-000 Cimbali401-183-010 CimbaliC469900420 Ecm401183000 Faema401183010 Faema4701024558 Faema01539006 Futurmat-Ariete05132808 Futurmat-ArieteISGUATF22172 Isomac...
€1.08
Bezzera contact thermostat 95°C M4 250V 16A
On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...
€39.37
Faema President and E61 2 group glass
It is not uncommon that the back lid glass of your Faema E61 or Faema President breaks. Glass remains fragile in the end. On this page you will find a replacement glass for the 2 group espresso machine. The get rid of the sharp edge the glass has been cut with a small chamfer. This glass plate comes without a stickers. We do only have the stickers for the...
€276.34
O ring EPDM 23x3mm
O ring EPDM 23x3mm. This o ring seals off one side of the one way valve. Return to the Faema E61 valve parts overview
€7.33
Faema E61 non return valve body
Faema E61 brass non return valve body. The side flange is screwed into the main body.If you want to complete the assembly add the following parts to the part:Faema E61 Spring Non Return Valve; O Ring EPDM 8,9x1,9mm; Faema E61 Small Non Return ValveReturn to the Faema E61 valve parts overview
€30.34
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.