Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

Rancilio flat copper gasket 24x20x1mm

The gasket on this page is made from copper instead from PTFE or a fibre material. The copper gasket is mainly used on Rancilio espresso machines. The Rancilio part number for this item is 27400001. This copper gasket is from the flat type, so not a copper compression gasket. The outer diameter of this gasket is 24mm, the inner diameter is 21mm and the...
€1.55

Lever group spring 168x46mm stainless steel

On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83

Procon clamp ring pump 180 L/H

On this page you will find a espresso machine pump suitable for a variety of espresso machines. This pump has been made by the company Procon in Ireland.  This model is a clamp ring pump, this pump is clamped with a stainless steel clamp to the espresso machine motor. The pump can pump 180 L/H and is fitted with a balanced bypass. To control the pump...
€158.76

Faema E61 engine RPM 300W 230V

The espresso machine motor on this page is made by the Italian electric motor manufacturer RPM. This motor is intended to be used as a exterior motor, so that it isn’t installed inside the machine. The motor is a good motor to use with a vintage espresso machine like the Faema E61. Currently this coffee machine motor can be used on a variety of models...
€204.91

Heating element gasket 41x33x3mm

On this page you will find a fibre gasket with a outer dimension of 41mm a inner one of 33mm and height of 3mm. This fibre gasket is used for a heating element with a flange diameter of 1”. This specific heating element gasket is used for Bezzera(5492004) espresso machines with the models: Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus and the Bezzera...
€4.00

Bezzera heating element 1250/1450W 220/240V original

The heating element on this page is a OEM/original Bezzera spare part. This element can be used on various domestic espresso machines. The Bezzera part references for this heating element are 5722207, 5722240 and 5722240TP  This heating element produces 1250/1450W at 220/240V. The submerges length of the element is 160mm. The flange of this heating...
€57.45

La Pavoni Professional pre-millenium boiler and group kit

This set is suitable for La Pavoni Professional pre millennium.  465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler gasket 1x362081 - boiler gasket 1x 361023 -...
€62.55

Faema E61 group valve guide 11mm

The brass square pin on this page can be used on the Faema E61 groups and on the Wega E61 style of brewing groups. The Faema part reference for this item is 4161135915 and the Wega part references are W10341 and WY27421013. This square brass pin has a overall length of 11mm. The length and width are 6x6mm. on the inside is a female M3 thread. This square...
€1.83

O ring nbr 8,9x1,9mm

This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview
€0.59

Faema E61 group net holder

This brass filter holder is used on the Faema E61 brewing group. This item has the Faema part reference of 4151135895. This brass filter holder slides over the nozzle in the op of the brewing group. In the widest section is the stainless steel filter placed with a brass ring on top of it. To keep the filter holder in place there is a nozzle spring...
€2.43

La Pavoni Europiccola brewing group sleeve

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...
€40.65

Faema E61 brew valve assembly

The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab This valve assembly is used in...
€9.16

Brasilia steam tap screw

The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04  This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...
€20.25

Faema lever joint guide left

On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€9.60

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16

Pavoni pre-millenium tamper 49.5mm American walnut

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94

Bezzera heating element 1850/2200W 220/240V

The heating element on this page can be used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722220, 5722236, 5722241, 5722241.01AL, 5722241AL, 5722241R and 5722416. This heating element produces 1850/2200W at 220/240V. There are in total 6 connecting poles. The flange has 4 bolt holes and has a outer diameter...
€86.25

Aurora Brugnetti boiler gasket 210x150x3mm

The boiler gasket on this product page can be used on various Aurora Brugnetti espresso machines. The Brugnetti part reference for this item is 000458A. The gasket is made from a universal gasket material. The outer diameter of this gasket is 210mm the inner diameter is 150mm and the thickness is 3mm. This gasket has been made in Italy.
€27.23

Gaggia lever group piston

The product on this page is a stainless steel piston for the Gaggia America and Gaggia Italia lever brewing groups. This piston has been made from 1 piece of stainless steel. The outer diameter of the piston is 50mm and the length is 82mm. The piston has the one way valve already installed. The piston also comes with a stainless steel shower screen with a...
€185.33

Europiccola bottomless portafilter pre-millenium

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni pre-Millennium brewing groups. You can use this brewing group for instance on the La Pavoni Europiccola, La Pavoni Professional and the La Pavoni Mignon. With...
€80.00

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.