La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€101.58
0
My cart
espresso machine brands
La Cimbali piston o ring 34,29X5,33mm
La Cimbali piston o ring 34,29X5,33mm. This thick o ring goes on the piston of a La Cimbali M20 lever brewing groupReturn to the La Cimbali M20 lever group overview
€4.18
La Pavoni Europiccola plastic drain grid
For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one. On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...
€15.84
Gaggia flat rubber gasket
This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18
Faema E61 group collector rod gasket holder
The item on this page is a gasket holder which is used in a variety of E61 brewing groups. You can find this item in some valve assemblies used on Faema, Pavoni and Wega espresso machines. For some brands this item is also used in the steam/water and water inlet valves. This brass gasket holder has 2 threads. 1 female and one male. The female thread is a...
€4.40
Vibiemme PTFE boiler gasket 165x150x3mm
The gasket shown on this product page can be used on various Vibiemme espresso machine boilers. The Vibiemme part reference for this item is GUARFL205T This boiler gasket has a outer diameter of 165mm a inner diameter of 150mm and a thickness of 3mm. This gasket has been made from PTFE. Made in Italy. You can use this boiler gasket on the Vibiemme Cubo,...
€21.99
La Cimbali sight glass 12x135mm
To replace a cracked 12x135mm La Cimbali sight glass. If you replace the sight glass, you should also repair the top and bottom seals to avoid leaks.This sight glass is also compatible with the La Cimbali M15, Rubino, and Gran Luce.
€8.20
Boiler top fitting 1/2"
If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...
€19.03
Bezzera ellisse spring guide
This item is a conical ptfe gasket, which is used on various Bezzera espresso machines. This item is a OEM/Original Bezzera spare part. The Bezzera part reference number for this item is 5494002. This conical gasket is made from PTFE. The outer diameter is 16,5mm, the inner diameter is 6mm and the thickness is 5,5mm. This gasket is made in Italy. You can...
€2.71
Faema charging valve o ring 4.2x1.9mm
Faema charging valve o ring 4.2x1.9mmReturn to the Faema E61 Legend water inlet parts overview
€0.89
La San Marco PTFE HX gasket 34x27x2mm
La San Marco PTFE HX gasket 34x27x2mmReturn to the San Marco group parts overview
€2.04
Bezzera heating element 1250/1450W 220/240V original
The heating element on this page is a OEM/original Bezzera spare part. This element can be used on various domestic espresso machines. The Bezzera part references for this heating element are 5722207, 5722240 and 5722240TP This heating element produces 1250/1450W at 220/240V. The submerges length of the element is 160mm. The flange of this heating...
€57.45
Faema Aluminium group head
A common problem with the aluminium Faema Zodiac lever brewing group casting is that over time the back of the aluminium group can snap off. Repairing this is normally quite a difficult challenge. This casting has been used on a variety of espresso machine models made by Faema. Like the Faema President and the Faema Lambro. Seen the parts for the Zodiac...
€322.51
Wega heating element 2 gr 2600W 230V
Wega heating element 2 gr 2600W 230VType flangedwatt 2600wvolt 230/400V
€74.25
La San Marco lever roller bearing
La San Marco lever roller bearingReturn to the La San Marco page overview
€37.69
Faema piston shaft
Also with the Faema Zodiac groups it is possible that your piston shaft needs replacing, if for instance your lever pin has worn out the attachment hole and there is play on it. Keep in mind that not all piston shafts are interchangeable due to the length of these shafts. This specific shaft has a length of 183mm, this does also include the threads. The...
€103.85
Faema lever group front stop
Faema lever group front stop. This stop makes sure that the lever assembly doesn't touch the brewing group when the lever is lowered. Over time the rubber used perishes or get’s damages. You can use this part on the Faema Zodiac lever group, Faema President, Faema Urania, Faema Lambro lever brewing groups. They are also usable for the Faema Marte and...
€4.93
La Cimbali shower screen spring
La Cimbali M15 and M20 shower screen spring. This stainless steel spring keeps the flat shower screen firmly in place during brewing.To clean the shower screen just gently compress the spring and pull it out. the shower screen will fall out of the brewing group right away.Return to the La Cimbali lever parts overview
€9.64
La Pavoni Europiccola heating element 1000W 230V
It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element. The...
€55.65
Faema Steam knob insert
Faema Steam knob insert. Suitable for:CodeProducer30370130 Expobar4831131214 FaemaL165/MV Marzocco
€1.56
Astoria bottomless portafilter
The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004. The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...
€60.39
La Pavoni Europiccola perforated washer
On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...
€4.71
RPM pump motor 165W 230V 50/60Hz
This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This pump is a clamp ring motor. So the...
€197.30
Astoria portafilter single spout
Astoria portafilter single spoutReturn to the portafilter overview
€55.37
Filterholder gasket 72.5x57x8 mm
On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
€3.67
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.