0
My cart
espresso machine brands
La San Marco steam/water valve spring driving bowl
La San Marco steam/water valve spring driving bowl
€5.07
Faema E61 brass washer
Faema E61 brass washer 5.4x3mm is fitted between the gasket valve holder and between the valve guides Return to the Faema E61 group parts overview
€0.38
La Pavoni lever fork
La Pavoni lever forkReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview
€80.18
La San Marco lower lever body
La San Marco lower lever body. partially shiny. Return to the San Marco group parts overview
€481.29
Rancilio portafilter gasket with 4 cuts 73x57.5x8mm
Rancilio portafilter gasket with 4 cuts 73x57.5x8mmReturn to the Rancilio group parts overview
€3.60
Fitting 1/4" x 1/4" MM
With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.
€4.21
La Pavoni Bar lever group shaft
La Pavoni Bar lever group shaftReturn to the La Pavoni Bar lever group parts overview
€101.58
La Carimali piston O Ring
The o rings used on this product page are the La Carimali piston o rings. Every piston uses in total 3 o rings to seal off the group. This o ring is made from EPDM. The cord diameter is 5,3mm and the inner diameter of the ring is 40,64mm. This item is made in Italy.
€3.18
Faema E61 aluminium filling lever
We where unable to trace down original or reproduction lever handles for the Faema E61 boiler filling valve. So we decided to have them casted ourselves. Seen the alternative would be a plastic handle which didn’t look like at all. We had made a casting mould and have a limited amount made of this Faema E61 aluminium filling handles. You will find this...
€64.31
Bottom fitting for boiler pipe 1/2"M 1/2"M, hole 1/4"F
If you are converting your Faema e61 with a new boiler, it can be practical to order this boiler fitting at the same time. As you can see, the new boiler does not come with this fitting. This fitting, cast and machined from brass, has a ½ ”BSP-G male thread on 2 sides. And on one side a ¼ ”BSP-G female thread. So screw it into the bottom of the HX on one...
€18.82
Elektra Microcasa water level 9x147mm
This sight glass is suitable for the Elektra Microcasa lever espresso machine. With this sight glass you are able to see if there is enough water inside the boiler. The part reference for this sight glass is 00141035. This sight glass has a outer diameter of 9mm and a length of 147mm.
€6.24
IMS La San Marco 2 cup filterbasket 14/18gr
IMS La San Marco 2 coffee filterbasket. This basket can contain between 14/18grams of coffeeThe filterbasket hole size is 0,3mmReturn to the IMS filterbasket overview page
€33.38
La Pavoni Europiccola pressure switch
The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
€18.92
Bezzera nipple
The item on this product page is a OEM/Original Bezzera nipple/shaft holder. This unit is used in various espresso machine models of Bezzera. The Bezzera part reference number is 5223402. This steam and water valve nipple/shaft holder is made from machined brass. The item is made in Italy. You can use this brass fitting on the Bezzera B2000, Bezzera...
€35.71
La Pavoni Europiccola tab rod
The item on this product page is a OEM/Original La Pavoni spare part, which can also be used on various Gaggia items. This item is the steam valve shaft. With this shaft you can control the flow of steam coming out of the steam tube. This item can be used on pre-millennium as well on millennium la Pavoni espresso machines. The La Pavoni part reference for...
€16.56
Expansion valve 1/4M adjustable 10-14 Bar
The item on this page is a espresso machine expansion valve. This valve can be used on various espresso machine brands such as La Scala, La Spaziale, La San Marco, Faema and Brasilia. This expansion valve has a male thread which is ¼” BSP-G. This valve is adjustable. The pressure range goes from 10 to 14 bar. For the exhaust water there is a connection...
€28.03
Gasket Viton 12x3.5x4mm
Dichtung Viton 12x3.5x4mm Suitable for:CodeProducer400-274-010 Cimbali400274010 Cimbali
€1.30
Elektra microcasa drip tray 140mm
On this page you will find a drain tray for the Elektra Microcasa a Leva, the domestic lever espresso machine from the brand Elektra. This plastic drain grid can be used in combination with the chrome drain tray (00156021) and the brass drain tray (00156019). The Elektra part reference for this drip tray is 00157035 This drain pan is placed in the bottom...
€26.42
Bezzera Strega portafilter gasket 7.5mm original
On this product page you will find the portafilter gasket for the Bezzera Strega. This portafilter gasket is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 7493020 This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 7,5mm.
€7.97
Arrarex Caravel seal set 1.0 - 1.3
On this product page you will find a gasket set suitable for the VAM Caravel and Arrarex Caravel lever espresso machines. This model set is not suitable for other models of the Arrarex Caravel then the 1.0 to 1.3 models. This gasket set has the following items in them 1x sillicone portafilter gasket; 1x sillicone o-ring; 2x hpu...
€38.43
Faema E61 moustache set
On this product page you will find the black L shaped plastic attachments for the side panels on Faema E61 and Faema President espresso machines. These side panels are mirrored from each other so they are not interchangeable. To install them you need to screw 3 small screws in the back. They are made in Italy. You can use them on the Faema E61, 1 to 4...
€31.71
Tap joint spring 12x15mm
The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from stainless...
€2.65
Faema non return valve plastic holder
Faema non return valve plastic holderReturn to the Faema E61 Legend water inlet parts overview
€3.63
Astoria and wega level glass cover painted white
On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This OEM/Original...
€15.34
Brasilia tab spring
The compression spring on this page is used on various models of the Brasilia espresso machine brand. This specific spring is used with the rubber steam and water valves. The part reference number for this item is 10962.0.00.03 This compression spring is made from Stainless steel. The outer diameter is 10,5mm and the length is 27mm. This steam and water...
€3.63
Valve shaft sleeve
Valve shaft sleeve. Suitable for:CodeProducer95.05033 Carimali30370065 Expobar4151-030015 Faema4151030015 Faema03001500 Futurmat-ArieteL165/7 Marzocco313115 Pavoni10402015 SanremoRACCBUSASRBK Vibiemme
€1.38
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.