Astoria heating element 2 group 4000W 230V
Astoria heating element 2 group 4000W 230VType flangedwatt 4000volt 230
€59.15
0
My cart
espresso machine brands
Victoria Arduino Supervat front lever stop
Victoria Arduino Supervat front lever stop. This stainless steel stop is a replacement for the original stop. This stop opens the brewing group valve.Back to the Victoria Arduino Supervat parts overview
€22.41
Astoria group locking gasket 88x40x2mm
On this page you will find a group locking gasket. This group locking gasket is normally used with most Astoria espresso machine and some Wega machines, so not lever groups. But they are also suitable for the Astoria and Wega lever groups This gasket is made from a fibre material. The outer diameter is 88 mm, the inner diameter is 40mm and the thickness...
€6.97
Lever group spring 168x46mm stainless steel
On this product page you will find a Stainless steel lever group spring. We had this spring modelled after a original one. The to reach a similar spring rate the coil diameter is slightly different then with a standard steel spring. The spring has a overall length of approximately 168mm and a outer diameter of approximately 46mm. Why approximately? Seen...
€35.83
Bezzera front lever stop
On this product page you will find a front stop for various Bezzera Lever groups. This item has the Bezzera part reference of 5473002.01 You can find this rubber stop on models such as the Bezzera B2000-AL, Bezzera 2006-AL, Bezzera Ebbis AL, Bezzera Ellisse AL and the Bezzera Strega lever group
€17.44
La Pavoni heating element gasket
La Pavoni heating element gasket. 67x67 mm, int. hole dia 40mm, 3 holes
€3.02
Rancilio steam/water valve joint o ring 12,1x2,7mm
Rancilio steam/water valve joint o ring 12,1x2,7mm
€0.87
Faema E61 steam valve pin
The small brass tab spindle can be found on various Faema espresso machines. Primarily in the E61 style of steam and water valve. The Faema part reference for this item is 4811135880 This tab spindle has been made from brass and has a overall length of 20,8mm. You can use this tab spindle on the Faema E61, Faema E61 Legend, Faema E61 Jubilee, Faema...
€2.69
La Carimali piston O Ring
The o rings used on this product page are the La Carimali piston o rings. Every piston uses in total 3 o rings to seal off the group. This o ring is made from EPDM. The cord diameter is 5,3mm and the inner diameter of the ring is 40,64mm. This item is made in Italy.
€3.18
La San Marco lever group plate
La San Marco lever group plate. To this plate the brewing group is fixed to.Return to the San Marco group parts overview
€93.77
La Pavoni Piston gasket
La Pavoni Piston gasketReturn to the La Pavoni Bar modern parts overview
€12.16
La Cimbali HX long 210mm dia 42mm
La Cimbali heat exchanger (HX) has a total length of 210mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...
€63.54
Elektra Microcasa bakelite portafilter handle M10
On this product page you will find the Bakelite handle used on various locations on the Elektra Microcasa a Leva. This lever handle can be used on the lever handle and as the portafilter handle. The part reference number of this part is 00469035 This Bakelite handle needs to be screwed into a metal stud which has a M10 thread (00186035)
€14.98
Gaggia Italcrem lever
Gaggia Italcrem lever. Return to the Gaggia Italcrem lever group parts overview
€155.28
Faema E61 group lever
The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651 This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...
€18.35
Faema P4 water knob
Faema P4 water knob. Suitable for:CodeProducer30370120 ExpobarL165/MA Marzocco
€1.51
- Out-of-Stock
Arrarex Caravel portafilter
There we have a re-production of a original Arrarex Caravel portafilter. The portafilter has been casted out of stainless steel and with a black delrin handle. This is a normal version, so not a bottomless one. It is suited for the same style portafilters for the Arrarex Caravel and the VAM Caravel lever espresso machines Return to the Arrarex Caravel...
€124.63
Sight glass gasket 16x10x8mm
The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has been...
€1.47
La Pavoni Europiccola brass nut
The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...
€5.38
Faema Urania 9 hole aluminium boiler flange ring
Faema Urania 9 hole aluminium boiler flange ring. This flange ring is not suited for the E61 style boiler flange ring.Return to the Urania boiler parts overview
€93.45
Faema glass support set
It is quite common that the supports of your glass at the back are rusted and the bolts are stuck. We have made a new set of support sets for the glass plates from stainless steel. This support set can be used on all the Faema e61Faema President lever espresso machines which use the glass plate. But also on the late models Urania which use the glass...
€45.30
Silicone piston gasket 52x40x7mm
This type of piston gasket is one of the most used models in the lever espresso machine world. But this one is different. Yes the dimensions are the same 52x40x7mm but the material is different then with the standard piston gaskets. They are made from clear silicone. This will make them last a lot longer then the standard ones made from NBR. The type of...
€3.97
- Out-of-Stock
Arrarex Caravel bottomless portafilter with basket
A set of our own bottomless portafilter and new filterbasket, you can select which type of diameter filterbasket you would like.Basket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mmWhat is the difference between a laser cut hole diameter of 0,25mm and 0,3 mm?We choose to make two hole diameters, because the flavor of the...
€140.66
Flex pipe 1500mm 3/8 FF conical base
The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.
€17.11
Brasilia tab gasket conical
This Conical PTFE gasket can be used on a variety of Brasilia espresso machines. For this item there is a Brasilia part reference of 00810.0.00.02. This gasket has a conical shape. The outer diameter of this PTFE gasket is 14,5mm, the inner diameter is 10mm and the thickness is 5mm. This gasket can be used on the rubber as well as on the ceramic valves....
€1.99
Gaggia lever group pinion gear
It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
€100.96
Arrarex Caravel: A Beacon of Innovation
Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.
La Cimbali: Precision Engineering at Its Finest
La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.
Faema: Elevating Espresso to Art
Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.
La Pavoni: A Testament to Italian Craftsmanship
Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.
Bezzera: Pioneering Espresso Excellence
Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.